def solve(self, bounds=None):
"""Solve the variational problem.
:arg bounds: Optional bounds on the solution (lower, upper).
``lower`` and ``upper`` must both be
:class:`~.Function`\s. or :class:`~.Vector`\s.
.. note::
If bounds are provided the ``snes_type`` must be set to
``vinewtonssls`` or ``vinewtonrsls``.
"""
# Make sure appcontext is attached to the DM before we solve.
dm = self.snes.getDM()
dmhooks.set_appctx(dm, self._ctx)
# Apply the boundary conditions to the initial guess.
for bc in self._problem.bcs:
bc.apply(self._problem.u)
if bounds is not None:
lower, upper = bounds
with lower.dat.vec_ro as lb, upper.dat.vec_ro as ub:
self.snes.setVariableBounds(lb, ub)
work = self._work.dat
# Ensure options database has full set of options (so monitors work right)
with self.inserted_options():
with work.vec as v:
with self._problem.u.dat.vec as u:
u.copy(v)
self.snes.solve(None, v)
v.copy(u)
solving_utils.check_snes_convergence(self.snes)
def solve(self, bounds=None):
"""Solve the variational problem.
:arg bounds: Optional bounds on the solution (lower, upper).
``lower`` and ``upper`` must both be
:class:`~.Function`\s. or :class:`~.Vector`\s.
.. note::
If bounds are provided the ``snes_type`` must be set to
``vinewtonssls`` or ``vinewtonrsls``.
"""
# Make sure appcontext is attached to the DM before we solve.
dm = self.snes.getDM()
dmhooks.set_appctx(dm, self._ctx)
# Apply the boundary conditions to the initial guess.
for bc in self._problem.bcs:
bc.apply(self._problem.u)
if bounds is not None:
lower, upper = bounds
with lower.dat.vec_ro as lb, upper.dat.vec_ro as ub:
self.snes.setVariableBounds(lb, ub)
work = self._work.dat
# Ensure options database has full set of options (so monitors work right)
with self.inserted_options():
with work.vec as v:
with self._problem.u.dat.vec as u:
u.copy(v)
self.snes.solve(None, v)
v.copy(u)
solving_utils.check_snes_convergence(self.snes)
def __init__(self, problem, **kwargs):
"""
:arg problem: A :class:`NonlinearVariationalProblem` to solve.
:kwarg nullspace: an optional :class:`.VectorSpaceBasis` (or
:class:`.MixedVectorSpaceBasis`) spanning the null
space of the operator.
:kwarg transpose_nullspace: as for the nullspace, but used to
make the right hand side consistent.
:kwarg near_nullspace: as for the nullspace, but used to
specify the near nullspace (for multigrid solvers).
:kwarg solver_parameters: Solver parameters to pass to PETSc.
This should be a dict mapping PETSc options to values.
:kwarg options_prefix: an optional prefix used to distinguish
PETSc options. If not provided a unique prefix will be
created. Use this option if you want to pass options
to the solver from the command line in addition to
through the ``solver_parameters`` dict.
Example usage of the ``solver_parameters`` option: to set the
nonlinear solver type to just use a linear solver, use
.. code-block:: python
{'snes_type': 'ksponly'}
PETSc flag options should be specified with `bool` values.
For example:
.. code-block:: python
{'snes_monitor': True}
"""
assert isinstance(problem, NonlinearVariationalProblem)
parameters = kwargs.get("solver_parameters")
if "parameters" in kwargs:
raise TypeError("Use solver_parameters, not parameters")
nullspace = kwargs.get("nullspace")
nullspace_T = kwargs.get("transpose_nullspace")
near_nullspace = kwargs.get("near_nullspace")
options_prefix = kwargs.get("options_prefix")
super(NonlinearVariationalSolver, self).__init__(parameters, options_prefix)
# Allow anything, interpret "matfree" as matrix_free.
mat_type = self.parameters.get("mat_type")
pmat_type = self.parameters.get("pmat_type")
matfree = mat_type == "matfree"
pmatfree = pmat_type == "matfree"
appctx = kwargs.get("appctx")
ctx = solving_utils._SNESContext(problem,
mat_type=mat_type,
pmat_type=pmat_type,
appctx=appctx)
# No preconditioner by default for matrix-free
if (problem.Jp is not None and pmatfree) or matfree:
self.set_default_parameter("pc_type", "none")
elif ctx.is_mixed:
# Mixed problem, use jacobi pc if user has not supplied
# one.
self.set_default_parameter("pc_type", "jacobi")
self.snes = PETSc.SNES().create(comm=problem.dm.comm)
self._problem = problem
self._ctx = ctx
self._work = type(problem.u)(problem.u.function_space())
self.snes.setDM(problem.dm)
ctx.set_function(self.snes)
ctx.set_jacobian(self.snes)
ctx.set_nullspace(nullspace, problem.J.arguments()[0].function_space()._ises,
transpose=False, near=False)
ctx.set_nullspace(nullspace_T, problem.J.arguments()[1].function_space()._ises,
transpose=True, near=False)
ctx.set_nullspace(near_nullspace, problem.J.arguments()[0].function_space()._ises,
transpose=False, near=True)
# Set from options now, so that people who want to noodle with
# the snes object directly (mostly Patrick), can. We need the
# DM with an app context in place so that if the DM is active
# on a subKSP the context is available.
dm = self.snes.getDM()
dmhooks.set_appctx(dm, self._ctx)
self.set_from_options(self.snes)
def __init__(self, problem, **kwargs):
"""
:arg problem: A :class:`NonlinearVariationalProblem` to solve.
:kwarg nullspace: an optional :class:`.VectorSpaceBasis` (or
:class:`.MixedVectorSpaceBasis`) spanning the null
space of the operator.
:kwarg transpose_nullspace: as for the nullspace, but used to
make the right hand side consistent.
:kwarg near_nullspace: as for the nullspace, but used to
specify the near nullspace (for multigrid solvers).
:kwarg solver_parameters: Solver parameters to pass to PETSc.
This should be a dict mapping PETSc options to values.
:kwarg options_prefix: an optional prefix used to distinguish
PETSc options. If not provided a unique prefix will be
created. Use this option if you want to pass options
to the solver from the command line in addition to
through the ``solver_parameters`` dict.
:kwarg pre_jacobian_callback: A user-defined function that will
be called immediately before Jacobian assembly. This can
be used, for example, to update a coefficient function
that has a complicated dependence on the unknown solution.
:kwarg pre_function_callback: As above, but called immediately
before residual assembly
Example usage of the ``solver_parameters`` option: to set the
nonlinear solver type to just use a linear solver, use
.. code-block:: python
{'snes_type': 'ksponly'}
PETSc flag options should be specified with `bool` values.
For example:
.. code-block:: python
{'snes_monitor': True}
To use the ``pre_jacobian_callback`` or ``pre_function_callback``
functionality, the user-defined function must accept the current
solution as a petsc4py Vec. Example usage is given below:
.. code-block:: python
def update_diffusivity(current_solution):
with cursol.dat.vec as v:
current_solution.copy(v)
solve(trial*test*dx == dot(grad(cursol), grad(test))*dx, diffusivity)
solver = NonlinearVariationalSolver(problem,
pre_jacobian_callback=update_diffusivity)
"""
assert isinstance(problem, NonlinearVariationalProblem)
parameters = kwargs.get("solver_parameters")
if "parameters" in kwargs:
raise TypeError("Use solver_parameters, not parameters")
nullspace = kwargs.get("nullspace")
nullspace_T = kwargs.get("transpose_nullspace")
near_nullspace = kwargs.get("near_nullspace")
options_prefix = kwargs.get("options_prefix")
pre_j_callback = kwargs.get("pre_jacobian_callback")
pre_f_callback = kwargs.get("pre_function_callback")
super(NonlinearVariationalSolver,
self).__init__(parameters, options_prefix)
# Allow anything, interpret "matfree" as matrix_free.
mat_type = self.parameters.get("mat_type")
pmat_type = self.parameters.get("pmat_type")
matfree = mat_type == "matfree"
pmatfree = pmat_type == "matfree"
appctx = kwargs.get("appctx")
ctx = solving_utils._SNESContext(problem,
mat_type=mat_type,
pmat_type=pmat_type,
appctx=appctx,
pre_jacobian_callback=pre_j_callback,
pre_function_callback=pre_f_callback)
# No preconditioner by default for matrix-free
if (problem.Jp is not None and pmatfree) or matfree:
self.set_default_parameter("pc_type", "none")
elif ctx.is_mixed:
# Mixed problem, use jacobi pc if user has not supplied
# one.
self.set_default_parameter("pc_type", "jacobi")
self.snes = PETSc.SNES().create(comm=problem.dm.comm)
self._problem = problem
self._ctx = ctx
self._work = type(problem.u)(problem.u.function_space())
self.snes.setDM(problem.dm)
ctx.set_function(self.snes)
ctx.set_jacobian(self.snes)
ctx.set_nullspace(nullspace,
problem.J.arguments()[0].function_space()._ises,
transpose=False,
near=False)
ctx.set_nullspace(nullspace_T,
problem.J.arguments()[1].function_space()._ises,
transpose=True,
near=False)
ctx.set_nullspace(near_nullspace,
problem.J.arguments()[0].function_space()._ises,
transpose=False,
near=True)
# Set from options now, so that people who want to noodle with
# the snes object directly (mostly Patrick), can. We need the
# DM with an app context in place so that if the DM is active
# on a subKSP the context is available.
dm = self.snes.getDM()
dmhooks.set_appctx(dm, self._ctx)
self.set_from_options(self.snes)
def __init__(self, problem, **kwargs):
"""
:arg problem: A :class:`NonlinearVariationalProblem` to solve.
:kwarg nullspace: an optional :class:`.VectorSpaceBasis` (or
:class:`.MixedVectorSpaceBasis`) spanning the null
space of the operator.
:kwarg transpose_nullspace: as for the nullspace, but used to
make the right hand side consistent.
:kwarg near_nullspace: as for the nullspace, but used to
specify the near nullspace (for multigrid solvers).
:kwarg solver_parameters: Solver parameters to pass to PETSc.
This should be a dict mapping PETSc options to values.
:kwarg options_prefix: an optional prefix used to distinguish
PETSc options. If not provided a unique prefix will be
created. Use this option if you want to pass options
to the solver from the command line in addition to
through the ``solver_parameters`` dict.
:kwarg pre_jacobian_callback: A user-defined function that will
be called immediately before Jacobian assembly. This can
be used, for example, to update a coefficient function
that has a complicated dependence on the unknown solution.
:kwarg pre_function_callback: As above, but called immediately
before residual assembly
Example usage of the ``solver_parameters`` option: to set the
nonlinear solver type to just use a linear solver, use
.. code-block:: python
{'snes_type': 'ksponly'}
PETSc flag options should be specified with `bool` values.
For example:
.. code-block:: python
{'snes_monitor': True}
To use the ``pre_jacobian_callback`` or ``pre_function_callback``
functionality, the user-defined function must accept the current
solution as a petsc4py Vec. Example usage is given below:
.. code-block:: python
def update_diffusivity(current_solution):
with cursol.dat.vec as v:
current_solution.copy(v)
solve(trial*test*dx == dot(grad(cursol), grad(test))*dx, diffusivity)
solver = NonlinearVariationalSolver(problem,
pre_jacobian_callback=update_diffusivity)
"""
assert isinstance(problem, NonlinearVariationalProblem)
parameters = kwargs.get("solver_parameters")
if "parameters" in kwargs:
raise TypeError("Use solver_parameters, not parameters")
nullspace = kwargs.get("nullspace")
nullspace_T = kwargs.get("transpose_nullspace")
near_nullspace = kwargs.get("near_nullspace")
options_prefix = kwargs.get("options_prefix")
pre_j_callback = kwargs.get("pre_jacobian_callback")
pre_f_callback = kwargs.get("pre_function_callback")
super(NonlinearVariationalSolver, self).__init__(parameters, options_prefix)
# Allow anything, interpret "matfree" as matrix_free.
mat_type = self.parameters.get("mat_type")
pmat_type = self.parameters.get("pmat_type")
matfree = mat_type == "matfree"
pmatfree = pmat_type == "matfree"
appctx = kwargs.get("appctx")
ctx = solving_utils._SNESContext(problem,
mat_type=mat_type,
pmat_type=pmat_type,
appctx=appctx,
pre_jacobian_callback=pre_j_callback,
pre_function_callback=pre_f_callback)
# No preconditioner by default for matrix-free
if (problem.Jp is not None and pmatfree) or matfree:
self.set_default_parameter("pc_type", "none")
elif ctx.is_mixed:
# Mixed problem, use jacobi pc if user has not supplied
# one.
self.set_default_parameter("pc_type", "jacobi")
self.snes = PETSc.SNES().create(comm=problem.dm.comm)
self._problem = problem
self._ctx = ctx
self._work = type(problem.u)(problem.u.function_space())
self.snes.setDM(problem.dm)
ctx.set_function(self.snes)
ctx.set_jacobian(self.snes)
ctx.set_nullspace(nullspace, problem.J.arguments()[0].function_space()._ises,
transpose=False, near=False)
ctx.set_nullspace(nullspace_T, problem.J.arguments()[1].function_space()._ises,
transpose=True, near=False)
ctx.set_nullspace(near_nullspace, problem.J.arguments()[0].function_space()._ises,
transpose=False, near=True)
# Set from options now, so that people who want to noodle with
# the snes object directly (mostly Patrick), can. We need the
# DM with an app context in place so that if the DM is active
# on a subKSP the context is available.
dm = self.snes.getDM()
dmhooks.set_appctx(dm, self._ctx)
self.set_from_options(self.snes)
