def launch_acquisition(msg):
global isAcquiring
isAcquiring = 1
macAddress = msg['payload']['macAddress']
# This example will collect data for 5 sec.
running_time = 9
batteryThreshold = 30
acqChannels = [0, 1, 2, 3, 4, 5]
samplingRate = 1000
nSamples = 10
digitalOutput = [1, 1]
# Connect to BITalino
device = BITalino(macAddress)
# Set battery threshold
device.battery(batteryThreshold)
# Read BITalino version
print(device.version())
# ON/OFF
device.trigger([1, 1])
device.trigger([0, 0])
# Start Acquisition
device.start(samplingRate, acqChannels)
start = time.time()
end = time.time()
while (end - start) < running_time and isAcquiring == 1:
# Read samples
data = device.read(nSamples)
print(data)
msg['payload']['val'] = data.tolist()
end = time.time()
# Stop acquisition
device.stop()
# Close connection
device.close()
isAcquiring = 0
return ("success")
countfeedback = 0;
print "STARTING STREAM"
while True:
# measure the time that it takes
start = time.time();
# read the selected channels from the
dat = device.read(blocksize)
# it starts with 5 extra channels, the first is the sample number (running from 0 to 15), the next 4 seem to be binary
dat = dat[:,5:]
# write the data to the output buffer
ft_output.putData(dat.astype(np.float32))
countfeedback += blocksize
if debug>1:
print "streamed", blocksize, "samples in", (time.time()-start)*1000, "ms"
elif debug>0 and countfeedback>=fsample:
# this gets printed approximately once per second
print "streamed", countfeedback, "samples in", (time.time()-startfeedback)*1000, "ms"
startfeedback = time.time();
countfeedback = 0
# Stop acquisition
device.stop()
# Close connection
device.close()
def main(self):
parser = argparse.ArgumentParser()
parser.add_argument("--sampling_rate",
help="Sampling rate used for recording data",
type=int,
default=10)
parser.add_argument("--offline",
help="run in offline mode",
action="store_true")
parser.add_argument("--logging",
dest="logging",
help="Log the data",
action="store_true",
default=True)
parser.add_argument("--no_logging",
dest='logging',
help="Log the data",
action="store_false")
parser.add_argument("--osc_path",
help="the osc path prefix",
default="Bitalino")
parser.add_argument("--dest_ip",
help="IP address of the destination",
default="127.0.0.1")
parser.add_argument("--dest_port",
help="the port",
type=int,
default=8000)
parser.add_argument("--mac_address", default="20:16:12:22:45:56")
parser.add_argument("--battery_threshold", default=30)
parser.add_argument("--analog_channels", default="0,1,2,3,4,5")
parser.add_argument("--batch_size",
help="number of samples read in batch",
type=int,
default=10)
parser.add_argument("--EDA_channel",
help="the analog channel inded of EXA",
type=int,
default=3)
args = parser.parse_args()
the_logger = log_writer(args.logging)
the_logger.log_msg("Starting up.")
# The channel list parsing is bit of a hack.. I'm sure there is some more pythonesque way of doing this
anal_channels = args.analog_channels.split(',')
channels = list(map(int, anal_channels))
# small samping rate for testing..
analogChannels = args.analog_channels
samplingRate = args.sampling_rate
nSamples = args.batch_size
# Connect to BITalino
device = BITalino(args.mac_address)
# Set battery threshold
batty = device.battery(args.battery_threshold)
# If we are not in offline mode we start streaming to given UDP port.
# He we just create a UDPClient for that.
if not args.offline:
client = udp_client.SimpleUDPClient(args.dest_ip, args.dest_port)
# Start recording
device.start(samplingRate, channels)
while self.interrupter == False:
# Start Acquisition
rec_data = device.read(nSamples)
current_time = datetime.datetime.now().timestamp()
for sample in rec_data:
# Delete digital channels (that contains just zeroes but that cannot be ignored)
# maybe this delete/insert thing is inefficient, but hopefully not inefficient enough
# to cause issues...
sample = np.delete(sample, [0, 1, 2, 3, 4])
sample = np.insert(sample, 0, current_time)
the_logger.log_data(sample)
current_time += (1.0 / samplingRate)
# Following code just for State of Darkness!! Does not generalize and will break if EDA is
# recorded from somewhere other than first channel.
EDA_data = np.mean(rec_data, axis=0)[(4 + args.EDA_channel)]
print("the EDA_data is: ", EDA_data)
osc_address = args.osc_path + "/EDA"
msg = osc_message_builder.OscMessageBuilder(address=osc_address)
msg.add_arg(EDA_data)
msg = msg.build()
if not args.offline:
client.send(msg)
# Stop acquisition
device.stop()
# Close connection
device.close()
return
countfeedback = 0
print("STARTING STREAM")
while True:
# measure the time that it takes
start = time.time();
# read the selected channels from the bitalino
dat = device.read(blocksize)
# it starts with 5 extra channels, the first is the sample number (running from 0 to 15), the next 4 seem to be binary
dat = dat[:,5:]
# write the data to the output buffer
ft_output.putData(dat.astype(np.float32))
countfeedback += blocksize
if debug>1:
print("streamed", blocksize, "samples in", (time.time()-start)*1000, "ms")
elif debug>0 and countfeedback>=fsample:
# this gets printed approximately once per second
print("streamed", countfeedback, "samples in", (time.time()-startfeedback)*1000, "ms")
startfeedback = time.time();
countfeedback = 0
# Stop acquisition
device.stop()
# Close connection
device.close()
class BluetoothDataReceiver():
""" Creates a data receiver via Bitalino class object,
a configuration and a data buffer.
Keyword arguments:
receiver_configuration -- a BluetoothReceiverConfiguration object
which contains the receiver settings from a JSON file.
data_buffer -- A Queue through which the received data is
transmitted forward.
"""
def __init__(self, receiver_configuration, data_buffer):
self.__data_buffer = data_buffer
self.__receiver_configuration = receiver_configuration
self.__communication_queue = None
self.__receiver_thread = None
self.__bitalino_device = BITalino(receiver_configuration.macAddress)
self.t0 = None
def Start(self):
""" Starts an 'infinite loop' which will receive and transmit
data on a separate thread until the *Stop* method is called.
"""
# Creates a Bitalino object using the given receiver configuration
# and try to connect to the Bitalino device.
self.__bitalino_device.start(
self.__receiver_configuration.samplingRate,
self.__receiver_configuration.acqChannels)
if self.__receiver_thread is None:
self.__communication_queue = queue.Queue()
self.__receiver_thread = threading.Thread(
target=self.__receiver_loop, args=[])
self.__receiver_thread.start()
def __receiver_loop(self):
""" An 'infinite loop' which is stopped by *Stop* method. \n
This method will get the data received through the Bitalino
device and send further via data buffer.
"""
self.t0 = time.time()
while True:
if not self.__communication_queue.empty():
cmd = self.__communication_queue.get()
if isinstance(cmd, str) and cmd == 'quit':
break
data = self.__bitalino_device.read(
self.__receiver_configuration.nSamples)
self.__data_buffer.put(
(self.__receiver_configuration.macAddress[-5:].replace(
':', ''), data[:, 5]))
def Stop(self):
""" Stops the 'infinite loop' thread created by *Start* call.
"""
self.__communication_queue.put('quit')
self.__receiver_thread.join()
self.__bitalino_device.stop()
self.__bitalino_device.close()
self.__communication_queue = None
self.__receiver_thread = None
def main():
# OS Specific Initializations
clearCmd = "cls||clear"
if platform.system() == 'Windows':
clearCmd = "cls"
print("Using Windows default console size 80x24")
columns = 80
rows = 24
else:
clearCmd = "clear"
rows, columns = os.popen('stty size', 'r').read().split()
print("Connecting to BITalino...")
# Set MAC Address with argument
defaultMACAddress = "20:16:12:21:98:56"
if len(sys.argv) == 2:
macAddress = sys.argv[1]
print("Using address: " + macAddress)
elif len(sys.argv) > 1:
print("Please input only 1 argument, which is the address of the BITalino device.")
print("Running without argument will use default MAC Address = " + defaultMACAddress)
print("Exiting...")
exit()
else:
macAddress = defaultMACAddress
print("Using default MAC address: " + macAddress)
# Setting other attributes
batteryThreshold = 30
acqChannels = [0,1]
samplingRate = 100
nSamples = 20
digitalOutput = [1,1]
# Connect to BITalino
device = BITalino(macAddress)
# Set battery threshold
device.battery(batteryThreshold)
# Read BITalino version
os.system(clearCmd)
print("Device Version:" + device.version())
# Start Acquisition
device.start(samplingRate, acqChannels)
# Take baseline measurement
p1Base = []
p2Base = []
start = time.time()
end = time.time()
samplingTime = 15
print("Sampling for baseline...")
while (end - start) < samplingTime:
# Sampling for baseline
baseSample = device.read(nSamples)
p1Base.append(numpy.mean(baseSample[:,5]))
p2Base.append(numpy.mean(baseSample[:,6]))
end = time.time()
p1B = numpy.mean(p1Base)
p2B = numpy.mean(p2Base)
print("\n")
p1P = "Player 1 Baseline: " + str(p1B)
print(p1P)
p2P = "Player 2 Baseline: " + str(p2B)
print(p2P)
print("\n\n\n\n\n\n")
print("Are you ready for the game? Type 'No' to exit".center(int(columns)," "))
response = sys.stdin.readline().rstrip()
if response == "No":
sys.exit()
print("\n")
print("Starting Game...".center(int(columns), " "))
time.sleep(5)
# Start Game
os.system(clearCmd)
gameRunning = True
player1Progress = 28
while gameRunning:
# While not reaching runningTime, read samples
rawData = device.read(nSamples)
portA1 = rawData[:,5]
#print "Port A1: ", portA1
valueA1 = numpy.mean(portA1 - p1B)
#print "Value A1: ", valueA1
#print ""
portA2 = rawData[:,6]
#print "Port A2: ", portA2
valueA2 = numpy.mean(portA2 - p2B)
#print "Value A2: ", valueA2
#print "\n"
if (valueA2 - valueA1) > 10:
player1Progress-=1
elif (valueA2 - valueA1) > 20:
plater1Progress-=2
elif (valueA1 - valueA2) > 10:
player1Progress+=1
elif (valueA1 - valueA2) > 20:
player1Progress+=2
print("\n\n")
print("Player 1 Reading:".center(int(columns)," "))
print("\n")
print(str(valueA1).center(int(columns)," "))
print("\n\n\n")
print("*****************************I*****************************".center(int(columns)," "))
progress = "P1 *" + ' '*player1Progress + 'O' + ' '*(56-player1Progress) + '* P2'
print(progress.center(int(columns)," "))
print("*****************************I*****************************".center(int(columns)," "))
print("\n\n\n")
print("Player 2 Reading:".center(int(columns)," "))
print("\n")
print(str(valueA2).center(int(columns)," "))
time.sleep(0.2)
os.system(clearCmd)
if player1Progress == 0:
print("\n\n\n\n\n")
print("Player 1 has won".center(int(columns)," "))
gameRunning = False
elif player1Progress == 56:
print("\n\n\n\n\n")
print("Player 2 has won".center(int(columns)," "))
gameRunning = False
# Turn BITalino LED on
device.trigger(digitalOutput)
# Stop acquisition
device.stop()
# Close connection
device.close()
class Bitalino(Node):
"""BITalino driver.
This node connects to a BITalino device and streams data at a provided rate.
It is based on the original BITalino Python library, with some performance
improvements and careful timestamping.
Two output streams are provided. The default output is the data read from the
analog and digital channels. The ``o_offsets`` output provides continuous offsets
between the local time and the estimated device time. This enables drift correction
to be performed during post-processing, although no significant drift has been
observed during testing.
Attributes:
o (Port): BITalino data, provides DataFrame.
o_offsets (Port): Time offsets, provide DataFrame.
Args:
port (string): The serial port.
e.g. ``COM3`` on Windows; ``/dev/tty.bitalino-DevB`` on MacOS;
``/dev/ttyUSB0`` on GNU/Linux.
rate (int): The device rate in Hz.
Possible values: ``1``, ``10``, ``100``, ``1000``. Default: ``1000``.
channels (tupple): The analog channels to read from.
Default: ``('A1', 'A2', 'A3', 'A4', 'A5', 'A6')``.
Example:
.. literalinclude:: /../examples/bitalino.yaml
:language: yaml
Notes:
.. attention::
Make sure to set your graph rate to an high-enough value, otherwise the device
internal buffer may saturate, and data may be lost. A 30Hz graph rate is
recommended for a 1000Hz device rate.
"""
def __init__(self,
port,
rate=1000,
channels=("A1", "A2", "A3", "A4", "A5", "A6")):
# Check port
if not port.startswith("/dev/") and not port.startswith("COM"):
raise ValueError(f"Invalid serial port: {port}")
# Check rate
if rate not in (1, 10, 100, 1000):
raise ValueError(f"Invalid rate: {rate}")
# Check channels
unique_channels = set(channels)
analog_channels = ["A1", "A2", "A3", "A4", "A5", "A6"]
channels = []
for channel_num, channel_name in enumerate(analog_channels):
if channel_name in unique_channels:
channels.append(channel_num)
# Set column names
# Sequence number and numeric channels are always present
self.columns = ["SEQ", "I1", "I2", "O1", "O2"]
# Add required analog channels
for channel in channels:
self.columns.append(analog_channels[channel])
# Compute the sample size in bytes
self.channel_count = len(channels)
if self.channel_count <= 4:
self.sample_size = int(
np.ceil((12.0 + 10.0 * self.channel_count) / 8.0))
else:
self.sample_size = int(
np.ceil((52.0 + 6.0 * (self.channel_count - 4)) / 8.0))
# Connect to BITalino
try:
self.device = BITalino(port)
except UnicodeDecodeError:
# This can happen after an internal buffer overflow.
# The solution seems to power off the device and repair.
raise WorkerInterrupt("Unstable state. Could not connect.")
except Exception as e:
raise WorkerInterrupt(e)
# Set battery threshold
# The red led will light up at 5-10%
self.device.battery(30)
# Read BITalino version
self.logger.info(self.device.version())
# Read state and show battery level
# http://forum.bitalino.com/viewtopic.php?t=448
state = self.device.state()
battery = round(
1 + (state["battery"] - 511) * ((99 - 1) / (645 - 511)), 2)
self.logger.info("Battery: %.2f%%", battery)
# Start Acquisition
self.device.start(rate, channels)
# Initialize counters for timestamp indices and continuity checks
self.last_sample_counter = 15
self.time_device = np.datetime64(int(time.time() * 1e6), "us")
self.time_local = self.time_device
self.time_delta = np.timedelta64(int(1000 / rate), "ms")
# Set meta
self.meta = {"rate": rate}
def update(self):
# Send BITalino data
data, timestamps = self._read_all()
self.o.set(data, timestamps, self.columns, self.meta)
# Send time offsets
if len(timestamps) > 0:
offset = (self.time_local - self.time_device).astype(int)
self.o_offsets.set(
[[self.time_device, offset]],
[self.time_local],
["time_device", "time_offset"],
)
def _read_all(self):
"""Read all available data"""
# Make sure the device is in aquisition mode
if not self.device.started:
raise Exception(ExceptionCode.DEVICE_NOT_IN_ACQUISITION)
# We only support serial connections
if not self.device.serial:
raise Exception("Device must be opened in serial mode.")
# Check buffer size and limits
buffer_size = self.device.socket.in_waiting
if buffer_size == 1020:
# The device buffer can hold up to 1020 bytes
self.logger.warn(
"OS serial buffer saturated. Increase graph rate or decrease device rate."
)
# Compute the maximum number of samples we can get
sample_count = int(buffer_size / self.sample_size)
# Infer timestamps from sample count and rate
# Will fail dramatically if too much packets are lost
# Tests show that there is no significant drift during a 2-hour session
start = self.time_device
stop = start + self.time_delta * sample_count
self.time_device = stop
timestamps = np.arange(start, stop, self.time_delta)
self.time_local = np.datetime64(int(time.time() * 1e6), "us")
# Infer timestamps from local time and rate
# /!\ Not monotonic
# stop = np.datetime64(int(time.time() * 1e6), 'us')
# start = stop - (sample_count * self.time_delta)
# timestamps = np.arange(start, stop, self.time_delta)
# Read raw samples from device
raw = self.device.socket.read(sample_count * self.sample_size)
# Initialize the output matrix
data = np.full((sample_count, 5 + self.channel_count), np.nan)
# Parse the raw data
# http://bitalino.com/datasheets/REVOLUTION_MCU_Block_Datasheet.pdf
for sample_number in range(sample_count):
# Extract sample
start = sample_number * self.sample_size
stop = start + self.sample_size
sample = list(
struct.unpack(self.sample_size * "B ", raw[start:stop]))
# Is the sample corrupted?
crc = sample[-1] & 0x0F
sample[-1] = sample[-1] & 0xF0
x = 0
for i in range(self.sample_size):
for bit in range(7, -1, -1):
x = x << 1
if x & 0x10:
x = x ^ 0x03
x = x ^ ((sample[i] >> bit) & 0x01)
if crc != x & 0x0F:
self.logger.warn("Checksum failed.")
continue
# Parse sample
data[sample_number, 0] = sample[-1] >> 4
data[sample_number, 1] = sample[-2] >> 7 & 0x01
data[sample_number, 2] = sample[-2] >> 6 & 0x01
data[sample_number, 3] = sample[-2] >> 5 & 0x01
data[sample_number, 4] = sample[-2] >> 4 & 0x01
if self.channel_count > 0:
data[sample_number,
5] = ((sample[-2] & 0x0F) << 6) | (sample[-3] >> 2)
if self.channel_count > 1:
data[sample_number,
6] = ((sample[-3] & 0x03) << 8) | sample[-4]
if self.channel_count > 2:
data[sample_number, 7] = (sample[-5] << 2) | (sample[-6] >> 6)
if self.channel_count > 3:
data[sample_number,
8] = ((sample[-6] & 0x3F) << 4) | (sample[-7] >> 4)
if self.channel_count > 4:
data[sample_number,
9] = ((sample[-7] & 0x0F) << 2) | (sample[-8] >> 6)
if self.channel_count > 5:
data[sample_number, 10] = sample[-8] & 0x3F
# Did we miss any sample?
# Check for discontinuity in the internal sample counter, encoded to 4 bits.
sample_counter = data[sample_number, 0]
if sample_counter == self.last_sample_counter + 1:
pass
elif sample_counter == 0 and self.last_sample_counter == 15:
pass
else:
self.logger.warn("Missed sample.")
self.last_sample_counter = sample_counter
return data, timestamps
def terminate(self):
self.device.stop()
self.device.close()
class BITalinoProcess(Process):
"""
BITalino acquisition process.
"""
def __init__(self,
outQueue,
goFlag,
acqFlag,
mac=None,
channels=[0],
step=100,
SamplingRate=1000,
timeout=5,
bitCls=None):
# run parent __init__
super(BITalinoProcess, self).__init__()
# synchronization inputs
self.queue = outQueue
self.go = goFlag
self.acq = acqFlag
# BITalino settings
self.mac = mac
self.channels = channels
self.step = step
self.SamplingRate = int(SamplingRate)
if bitCls is None:
self.device = BITalino()
else:
self.device = bitCls()
# trigger stuff
c1, c2 = Pipe()
self._outerPipe = c1
self._innerPipe = c2
self._trigout = 2 * self.step / float(self.SamplingRate)
# timeout
self.timeout = timeout
@classmethod
def instaStart(cls, *args, **kwargs):
# do some class method magic here to instantiate and start the process
outQueue = Queue()
goFlag = Event()
goFlag.set()
acqFlag = Event()
p = cls(outQueue, goFlag, acqFlag, *args, **kwargs)
p.start()
return p, outQueue, goFlag, acqFlag
def _checkTrigger(self):
# check if there is a trigger to act on
if self._innerPipe.poll():
data = self._innerPipe.recv()
try:
mask = data['Mask']
except KeyError:
# report failure
self._innerPipe.send({'Ack': False})
else:
# trigger
self.device.trigger(mask)
# report success
self._innerPipe.send({'Ack': True})
def trigger(self, data=[0, 0, 0, 0]):
# act on digital outputs
if not self.acq.is_set():
return False
# send mask
self._outerPipe.send({'Mask': data})
# wait for ack
if self._outerPipe.poll(self._trigout):
out = self._outerPipe.recv()
return out['Ack']
else:
return False
def connect(self):
# connect to BITalino
if self.device.open(self.mac, self.SamplingRate):
time.sleep(1.5)
print "successful"
return True
else:
print "failed"
return False
def setup(self):
# setup bitalino
print "connecting to %s: " % self.mac
while self.go.is_set():
if self.connect():
return True
time.sleep(1.5)
return False
def on_start(self):
# run immediately after acquisition starts
pass
def exit(self):
# exit process
self.acq.clear()
self.go.clear()
def processData(self, data):
# process received data
# send data
self.queue.put(data)
def on_stop(self):
# run immediately before acquisition stops
pass
def run(self):
# main loop
# connect to device, proceed if successful
if self.setup():
while self.go.is_set():
# wait for acquisition flag
print "Waiting"
self.acq.wait(timeout=self.timeout)
if self.acq.is_set():
# start acquisition
self.device.start(self.channels)
# time.sleep(1)
print "acquiring"
self.on_start()
while self.acq.is_set():
# read data
data = self.device.read(self.step)
# process data
self.processData(data)
# check trigger
self._checkTrigger()
# clean up
self.on_stop()
self.queue.put('')
# stop acquisition
self.device.stop()
# print "blocked"
print "acquisition stopped"
# disconnect device
self.device.close()
print "disconnected"