def GetModelParameterFields(structTypeIdx, ParameterStruct, paramIdx, baseParName, paramList, recLev ):
if recLev == 10:
raise Exception
numFields = WrapperLib.WCAPI_GetDataTypeNumElements(
DataTypeMap, structTypeIdx)
elementMapIndex = WrapperLib.WCAPI_GetDataTypeElemMapIndex(
DataTypeMap, structTypeIdx)
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
#print('NUM FIELDS: '+str(numFields))
for fieldIdx in range(numFields):
fieldName = WrapperLib.WCAPI_GetElementName(
ElementMap, elementMapIndex + fieldIdx)
fieldName = fieldName.decode("utf-8")
#print('FIELD: '+baseParName+'-'+fieldName)
fieldOffset = WrapperLib.WCAPI_GetElementOffset(
ElementMap, elementMapIndex + fieldIdx)
fieldTypeIdx = WrapperLib.WCAPI_GetElementDataTypeIdx(
ElementMap, elementMapIndex + fieldIdx)
#print('fieldTypeIdx: '+str(fieldTypeIdx))
fieldSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, fieldTypeIdx)
#print('fieldSLIdType: '+str(fieldSLIdType))
if fieldSLIdType == 0:
fieldMARTe2Typename = 'float64'
fieldPythonTypename = ctypes.c_double
elif fieldSLIdType == 1:
fieldMARTe2Typename = 'float32'
fieldPythonTypename = ctypes.c_float
elif fieldSLIdType == 2:
fieldMARTe2Typename = 'int8'
fieldPythonTypename = ctypes.c_int8
elif fieldSLIdType == 3:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_uint8
elif fieldSLIdType == 4:
fieldMARTe2Typename = 'int16'
fieldPythonTypename = ctypes.c_int16
elif fieldSLIdType == 5:
fieldMARTe2Typename = 'uint16'
fieldPythonTypename = ctypes.c_uint16
elif fieldSLIdType == 6:
fieldMARTe2Typename = 'int32'
fieldPythonTypename = ctypes.c_int32
elif fieldSLIdType == 7:
fieldMARTe2Typename = 'uint32'
fieldPythonTypename = ctypes.c_uint32
elif fieldSLIdType == 8:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_int8
elif fieldSLIdType == 254:
fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, fieldTypeIdx)
if fieldEnumType == 0:
fieldMARTe2Typename = 'float64'
fieldPythonTypename = ctypes.c_double
elif fieldEnumType == 1:
fieldMARTe2Typename = 'float32'
fieldPythonTypename = ctypes.c_float
elif fieldEnumType == 2:
fieldMARTe2Typename = 'int8'
fieldPythonTypename = ctypes.c_int8
elif fieldEnumType == 3:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_uint8
elif fieldEnumType == 4:
fieldMARTe2Typename = 'int16'
fieldPythonTypename = ctypes.c_int16
elif fieldEnumType == 5:
fieldMARTe2Typename = 'uint16'
fieldPythonTypename = ctypes.c_uint16
elif fieldEnumType == 6:
fieldMARTe2Typename = 'int32'
fieldPythonTypename = ctypes.c_int32
elif fieldEnumType == 7:
fieldMARTe2Typename = 'uint32'
fieldPythonTypename = ctypes.c_uint32
else:
print('type '+str(fieldEnumType))
raise Exception('Unsupported Enum datatype.')
else: #NESTED STRUCTURES!!!!!!!!!!!!!!!!
#print('TYPE '+str(fieldSLIdType) + ' '+str(fieldTypeIdx))
GetModelParameterFields(fieldTypeIdx, ParameterStruct, paramIdx, baseParName + '-'+fieldName, paramList, recLev+1)
continue #no direct data associated
# field dimensions
# dimensions are retrieved
fieldDimIdx = WrapperLib.WCAPI_GetElementDimensionIdx(
ElementMap, elementMapIndex + fieldIdx)
fieldDimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap, fieldDimIdx) # Starting position in the dimensionArray
# Number of elements in the dimensionArray referring to this signal
fieldDimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, fieldDimIdx)
#print('fieldDimNum: '+ str(fieldDimNum))
currDimension = []
for currIdx in range(fieldDimNum):
currDimension.append(
DimensionArray[fieldDimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1:
fieldDimension = 0
elif currDimension[0] == 1 or currDimension[1] == 1:
fieldDimension = [
currDimension[0]*currDimension[1]]
else:
fieldDimension = currDimension
currParAddress = paramDataAddr + fieldOffset
paramPointer = ctypes.cast(
currParAddress, ctypes.POINTER(fieldPythonTypename))
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0]*currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if fieldSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif fieldSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif fieldSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif fieldSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif fieldSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif fieldSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif fieldSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif fieldSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
elif fieldSLIdType == 8:
mdsplusValue = MDSplus.Uint8Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
paramDict = dict(name=baseParName+'-'+fieldName,
type=fieldMARTe2Typename, dimensions=fieldDimension, value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
def GetModelParameterData(ParameterStruct, numOfParameters):
paramList = []
for paramIdx in range(numOfParameters):
# name is retrieved
retrievedName = WrapperLib.WCAPI_GetModelParameterName(
ParameterStruct, paramIdx)
retrievedName = retrievedName.decode("utf-8")
# type is retrieved
retrievedTypeIdx = WrapperLib.WCAPI_GetModelParameterDataTypeIdx(
ParameterStruct, paramIdx)
retrievedSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, retrievedTypeIdx)
retrievedCTypename = WrapperLib.WCAPI_GetDataTypeCName(
DataTypeMap, retrievedTypeIdx)
retrievedCTypename = retrievedCTypename.decode("utf-8")
if retrievedSLIdType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif retrievedSLIdType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif retrievedSLIdType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif retrievedSLIdType == 3:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_uint8
elif retrievedSLIdType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif retrievedSLIdType == 5:
MARTe2Typename = 'uint16'
pythonTypename = ctypes.c_uint16
elif retrievedSLIdType == 6:
MARTe2Typename = 'int32'
pythonTypename = ctypes.c_int32
elif retrievedSLIdType == 7:
MARTe2Typename = 'uint32'
pythonTypename = ctypes.c_uint32
elif retrievedSLIdType == 8:
MARTe2Typename = 'bool'
pythonTypename = ctypes.c_bool
else:
raise Exception('Unsupported parameter datatype.')
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
paramPointer = ctypes.cast(paramDataAddr,
ctypes.POINTER(pythonTypename))
# dimensions are retrieved
dimIdx = WrapperLib.WCAPI_GetModelParameterDimensionIdx(
ParameterStruct, paramIdx)
dimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap,
dimIdx) # Starting position in the dimensionArray
dimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, dimIdx
) # Number of elements in the dimensionArray referring to this signal
currDimension = []
for currIdx in range(dimNum):
currDimension.append(DimensionArray[dimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0] * currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if retrievedSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif retrievedSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif retrievedSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif retrievedSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif retrievedSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif retrievedSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif retrievedSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif retrievedSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
# retrieved data is saved to a dictionary
paramDict = dict(name='Parameters.' + retrievedName,
type=MARTe2Typename,
dimensions=dimension,
value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
return paramList
def GetModelParameterData(ParameterStruct, numOfParameters):
paramList = []
for paramIdx in range(numOfParameters):
# name is retrieved
retrievedName = WrapperLib.WCAPI_GetModelParameterName(
ParameterStruct, paramIdx)
retrievedName = retrievedName.decode("utf-8")
#print('retrievedname: ', retrievedName)
# type is retrieved
retrievedTypeIdx = WrapperLib.WCAPI_GetModelParameterDataTypeIdx(
ParameterStruct, paramIdx)
#print('retrievedTypeIdx: ', str(retrievedTypeIdx))
retrievedSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, retrievedTypeIdx)
#print('retrievedSLIdType: ', str(retrievedSLIdType))
#retrievedCTypename = WrapperLib.WCAPI_GetDataTypeCName(
# DataTypeMap, retrievedTypeIdx)
#retrievedCTypename = retrievedCTypename.decode("utf-8")
#print('retrievedCTypename: '+retrievedCTypename)
if retrievedSLIdType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif retrievedSLIdType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif retrievedSLIdType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif retrievedSLIdType == 3:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_uint8
elif retrievedSLIdType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif retrievedSLIdType == 5:
MARTe2Typename = 'uint16'
pythonTypename = ctypes.c_uint16
elif retrievedSLIdType == 6:
MARTe2Typename = 'int32'
pythonTypename = ctypes.c_int32
elif retrievedSLIdType == 7:
MARTe2Typename = 'uint32'
pythonTypename = ctypes.c_uint32
elif retrievedSLIdType == 8:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_bool
elif retrievedSLIdType == 254:
fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, retrievedTypeIdx)
if fieldEnumType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif fieldEnumType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif fieldEnumType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif fieldEnumType == 3:
pythonTypename = ctypes.c_uint8
MARTe2Typename = 'uint8'
elif fieldEnumType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif fieldEnumType == 5:
pythonTypename = ctypes.c_uint16
MARTe2Typename = 'uint16'
elif fieldEnumType == 6:
pythonTypename = ctypes.c_int32
MARTe2Typename = 'int32'
elif fieldEnumType == 7:
pythonTypename = ctypes.c_uint32
MARTe2Typename = 'uint32'
else:
print('type '+str(fieldEnumType))
raise Exception('Unsupported Enum datatype.')
elif retrievedSLIdType == 255:
pass
else:
raise Exception('Unsupported parameter datatype.')
if retrievedSLIdType != 255:
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
paramPointer = ctypes.cast(
paramDataAddr, ctypes.POINTER(pythonTypename))
# dimensions are retrieved
dimIdx = WrapperLib.WCAPI_GetModelParameterDimensionIdx(
ParameterStruct, paramIdx)
dimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap, dimIdx) # Starting position in the dimensionArray
# Number of elements in the dimensionArray referring to this signal
dimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, dimIdx)
currDimension = []
for currIdx in range(dimNum):
currDimension.append(DimensionArray[dimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0]*currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if retrievedSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif retrievedSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif retrievedSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif retrievedSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif retrievedSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif retrievedSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif retrievedSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif retrievedSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
# retrieved data is saved to a dictionary
paramDict = dict(name='Parameters.'+retrievedName,
type=MARTe2Typename, dimensions=dimension, value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
else: #retrievedSLIdType == 255 SRUCTURED PARAMETERS
GetModelParameterFields(retrievedTypeIdx, ParameterStruct, paramIdx, 'Parameters.'+retrievedName, paramList, 1)
#numFields = WrapperLib.WCAPI_GetDataTypeNumElements(
#DataTypeMap, retrievedTypeIdx)
#elementMapIndex = WrapperLib.WCAPI_GetDataTypeElemMapIndex(
#DataTypeMap, retrievedTypeIdx)
## actual parameter value is retrieved
#paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
#ParameterStruct, paramIdx)
#paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
#DataAddrMap, paramAddrIdx)
#print('NUM FIELDS: '+str(numFields))
#for fieldIdx in range(numFields):
#fieldName = WrapperLib.WCAPI_GetElementName(
#ElementMap, elementMapIndex + fieldIdx)
#fieldName = fieldName.decode("utf-8")
#print('FIELD: '+fieldName)
#fieldOffset = WrapperLib.WCAPI_GetElementOffset(
#ElementMap, elementMapIndex + fieldIdx)
#fieldTypeIdx = WrapperLib.WCAPI_GetElementDataTypeIdx(
#ElementMap, elementMapIndex + fieldIdx)
#fieldSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
#DataTypeMap, fieldTypeIdx)
#if fieldSLIdType == 0:
#fieldMARTe2Typename = 'float64'
#fieldPythonTypename = ctypes.c_double
#elif fieldSLIdType == 1:
#fieldMARTe2Typename = 'float32'
#fieldPythonTypename = ctypes.c_float
#elif fieldSLIdType == 2:
#fieldMARTe2Typename = 'int8'
#fieldPythonTypename = ctypes.c_int8
#elif fieldSLIdType == 3:
#fieldMARTe2Typename = 'uint8'
#fieldPythonTypename = ctypes.c_uint8
#elif fieldSLIdType == 4:
#fieldMARTe2Typename = 'int16'
#fieldPythonTypename = ctypes.c_int16
#elif fieldSLIdType == 5:
#fieldMARTe2Typename = 'uint16'
#fieldPythonTypename = ctypes.c_uint16
#elif fieldSLIdType == 6:
#fieldMARTe2Typename = 'int32'
#fieldPythonTypename = ctypes.c_int32
#elif fieldSLIdType == 7:
#fieldMARTe2Typename = 'uint32'
#fieldPythonTypename = ctypes.c_uint32
#elif fieldSLIdType == 8:
#fieldMARTe2Typename = 'bool'
#fieldPythonTypename = ctypes.c_int8
#elif fieldSLIdType == 254:
#fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, fieldTypeIdx)
#if fieldEnumType == 0:
#fieldMARTe2Typename = 'float64'
#fieldPythonTypename = ctypes.c_double
#elif fieldEnumType == 1:
#fieldMARTe2Typename = 'float32'
#fieldPythonTypename = ctypes.c_float
#elif fieldEnumType == 2:
#fieldMARTe2Typename = 'int8'
#fieldPythonTypename = ctypes.c_int8
#elif fieldEnumType == 3:
#fieldMARTe2Typename = 'uint8'
#fieldPythonTypename = ctypes.c_uint8
#elif fieldEnumType == 4:
#fieldMARTe2Typename = 'int16'
#fieldPythonTypename = ctypes.c_int16
#elif fieldEnumType == 5:
#fieldMARTe2Typename = 'uint16'
#fieldPythonTypename = ctypes.c_uint16
#elif fieldEnumType == 6:
#fieldMARTe2Typename = 'int32'
#fieldPythonTypename = ctypes.c_int32
#elif fieldEnumType == 7:
#fieldMARTe2Typename = 'uint32'
#fieldPythonTypename = ctypes.c_uint32
#else:
#print('type '+str(fieldEnumType))
#raise Exception('Unsupported Enum datatype.')
#else:
#print('type '+str(fieldSLIdType))
#raise Exception('Unsupported nested structures.')
## field dimensions
## dimensions are retrieved
#fieldDimIdx = WrapperLib.WCAPI_GetElementDimensionIdx(
#ElementMap, elementMapIndex + fieldIdx)
#fieldDimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
#DimensionMap, fieldDimIdx) # Starting position in the dimensionArray
## Number of elements in the dimensionArray referring to this signal
#fieldDimNum = WrapperLib.WCAPI_GetNumDims(
#DimensionMap, fieldDimIdx)
#currDimension = []
#for currIdx in range(fieldDimNum):
#currDimension.append(
#DimensionArray[fieldDimArrayIdx + currIdx])
#if currDimension[0] == 1 and currDimension[1] == 1:
#fieldDimension = 0
#elif currDimension[0] == 1 or currDimension[1] == 1:
#fieldDimension = [
#currDimension[0]*currDimension[1]]
#else:
#fieldDimension = currDimension
#currParAddress = paramDataAddr + fieldOffset
#paramPointer = ctypes.cast(
#currParAddress, ctypes.POINTER(fieldPythonTypename))
#if currDimension[0] == 1 and currDimension[1] == 1: # scalar
#dimension = 0
#mdsplusValue = paramPointer[0]
#elif currDimension[0] == 1: # vector
#dimension = currDimension[0]*currDimension[1]
#valueList = []
#for idx in range(dimension):
#valueList.append(paramPointer[idx])
#else:
## matrix or column vector (MARTe2 sees column vectors as matrices)
#dimension = currDimension
#idx = 0
#valueList = []
#valueRow = []
#for nRow in range(currDimension[0]):
#for nCol in range(currDimension[1]):
#valueRow.append(paramPointer[idx])
#idx = idx + 1
#valueList.append(valueRow)
#valueRow = []
#if currDimension[0] != 1 or currDimension[1] != 1:
#if fieldSLIdType == 0:
#mdsplusValue = MDSplus.Float32Array(valueList)
#elif fieldSLIdType == 1:
#mdsplusValue = MDSplus.Float64Array(valueList)
#elif fieldSLIdType == 2:
#mdsplusValue = MDSplus.Int8Array(valueList)
#elif fieldSLIdType == 3:
#mdsplusValue = MDSplus.Uint8Array(valueList)
#elif fieldSLIdType == 4:
#mdsplusValue = MDSplus.Int16Array(valueList)
#elif fieldSLIdType == 5:
#mdsplusValue = MDSplus.Uint16Array(valueList)
#elif fieldSLIdType == 6:
#mdsplusValue = MDSplus.Int32Array(valueList)
#elif fieldSLIdType == 7:
#mdsplusValue = MDSplus.Uint32Array(valueList)
#else:
#raise Exception('Unsupported parameter datatype.')
#paramDict = dict(name='Parameters.'+retrievedName+'-'+fieldName,
#type=fieldMARTe2Typename, dimensions=fieldDimension, value=mdsplusValue)
## dictionary is appended to the MDSplus-style list
#paramList.append(paramDict)
#endif STRUCTURED PARAMETER
#endfor parameters
#print('PARAMETRI FATTI')
return paramList
