def sendY_M(self):
print('sendY_M')
print('sendStream')
print('sendStream(shot, name, time, data)', 0, 'Y_M',
MDSplus.Float32(self.sim_time),
MDSplus.Float64Array(self.y_m[self.sim_index, :]))
sendStream(0, 'Y_M', MDSplus.Float32(self.sim_time),
MDSplus.Float64Array(self.y_m[self.sim_index, :]))
print('send setpoint')
MDSplus.Event.stream(0, 'SETPOINT', MDSplus.Float32(self.sim_time),
MDSplus.Float64(self.set_point[self.sim_index]))
self.sim_index += 1
print('set label')
self.ui.Y_Mlabel.setText(str(self.y_m[self.sim_index, 0]))
self.sim_time += .01
print('done')
def writedata(data, dims, nodepath, expt, shot):
""" data: list of images """
""" dims: array of double seconds based on T1 """
tree = _mds.Tree(expt, shot)
node = tree.getNode(nodepath)
node.deleteData()
for i in range(len(data)):
dim = _mds.Float64Array(dims[i])
dim.setUnits('s')
node.makeSegment(dims[i], dims[i], dim, _mds.makeArray(data[i]), -1)
def _Fp2Mds(self):
"""
Store the Fast Reciprocating probe into the
appropriate MDSplus Tree
"""
# density
if self._Plunge1:
dummy = self.saveTree.getNode(r'\FP_1PL_EN')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.enU1,
self.tU1))
dummy.setUnits('m-3')
dummy = self.saveTree.getNode(r'\FP_1PL_ENERR')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)",
self.enU1Err, self.tU1))
dummy.setUnits('m-3')
# temperature
dummy = self.saveTree.getNode(r'\FP_1PL_TE')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.teU1,
self.tU1))
dummy.setUnits('eV')
try:
dummy = self.saveTree.getNode(r'\FP_1PL_TEERR')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)",
self.teU1Err, self.tU1))
dummy.setUnits('eV')
except:
pass
# jsat
dummy = self.saveTree.getNode(r'\FP_1PL_JS')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.jsU1,
self.tU1))
dummy.setUnits('Am-2')
# floating potentials
dummy = self.saveTree.getNode(r'\FP_1PL_VFT')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfTU1,
self.tU1))
dummy.setUnits('V')
dummy = self.saveTree.getNode(r'\FP_1PL_VFM')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfMU1,
self.tU1))
dummy.setUnits('V')
dummy = self.saveTree.getNode(r'\FP_1PL_VFB')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfBU1,
self.tU1))
dummy.setUnits('V')
# rho
dummy = self.saveTree.getNode(r'\FP_1PL_RHO')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.rhoU1,
self.tU1))
# R-Rsep
dummy = self.saveTree.getNode(r'\FP_1PL_RRSEP')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.drUsU1,
self.tU1))
dummy.setUnits('m')
# R-Rsep time
dummy = self.saveTree.getNode(r'\FP_1PL_RRSEPT')
dt = numpy.diff(self.RRsepT1Time).mean()
timeS = numpy.round(dt / (10**numpy.floor(
numpy.log10(dt)))).astype('|S4') + '*1e' + numpy.floor(
numpy.log10(dt)).astype('|S2')
string = 'Build_Signal(Build_With_Units($VALUE,"m"),$, Build_Dim(Build_Window(0,' + \
str(self.RRsepT1Time.size - 1) + ',' + \
str(self.RRsepT1Time.min()) + '),*:*:' + timeS + '))'
expr = mds.Data.compile(string, mds.Float64Array(self.RRsepT1))
dummy.putData(expr)
dummy.setUnits('m')
# Rho time
dummy = self.saveTree.getNode(r'\FP_1PL_RHOT')
dt = numpy.diff(self.RhoT1Time).mean()
timeS = numpy.round(dt / (10**numpy.floor(
numpy.log10(dt)))).astype('|S4') + '*1e' + numpy.floor(
numpy.log10(dt)).astype('|S2')
string = 'Build_Signal(Build_With_Units($VALUE,"rho"),$, Build_Dim(Build_Window(0,' + \
str(self.RhoT1Time.size - 1) + ',' + \
str(self.RhoT1Time.min()) + '),*:*:' + timeS + '))'
expr = mds.Data.compile(string, mds.Float64Array(self.RhoT1))
dummy.putData(expr)
dummy.setUnits(' ')
if self._Plunge2:
dummy = self.saveTree.getNode(r'\FP_2PL_EN')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.enU2,
self.tU2))
dummy.setUnits('m-3')
dummy = self.saveTree.getNode(r'\FP_2PL_ENERR')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)",
self.enU2Err, self.tU2))
dummy.setUnits('m-3')
# temperature
dummy = self.saveTree.getNode(r'\FP_2PL_TE')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.teU2,
self.tU2))
dummy.setUnits('eV')
try:
dummy = self.saveTree.getNode(r'\FP_2PL_TEERR')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)",
self.teU2Err, self.tU2))
dummy.setUnits('eV')
except:
pass
# jsat
dummy = self.saveTree.getNode(r'\FP_2PL_JS')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.jsU2,
self.tU2))
dummy.setUnits('Am-2')
# floating potentials
dummy = self.saveTree.getNode(r'\FP_2PL_VFT')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfTU2,
self.tU2))
dummy.setUnits('V')
dummy = self.saveTree.getNode(r'\FP_2PL_VFM')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfMU2,
self.tU2))
dummy.setUnits('V')
dummy = self.saveTree.getNode(r'\FP_2PL_VFB')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.vfBU2,
self.tU2))
dummy.setUnits('V')
# rho
dummy = self.saveTree.getNode(r'\FP_2PL_RHO')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.rhoU2,
self.tU2))
# R-Rsep
dummy = self.saveTree.getNode(r'\FP_2PL_RRSEP')
dummy.putData(
mds.Data.compile("BUILD_SIGNAL(($VALUE), $1, $2)", self.drUsU2,
self.tU2))
dummy.setUnits('m')
# R-Rsep time
dummy = self.saveTree.getNode(r'\FP_2PL_RRSEPT')
dt = numpy.diff(self.RRsepT2Time).mean()
timeS = numpy.round(dt / (10**numpy.floor(
numpy.log10(dt)))).astype('|S4') + '*1e' + numpy.floor(
numpy.log10(dt)).astype('|S2')
string = 'Build_Signal(Build_With_Units($VALUE,"m"),$, Build_Dim(Build_Window(0,' + \
str(self.RRsepT2Time.size - 1) + ',' + \
str(self.RRsepT2Time.min()) + '),*:*:' + timeS + '))'
expr = mds.Data.compile(string, mds.Float64Array(self.RRsepT2))
dummy.putData(expr)
dummy.setUnits('m')
# Rho time
dummy = self.saveTree.getNode(r'\FP_2PL_RHOT')
dt = numpy.diff(self.RhoT2Time).mean()
timeS = numpy.round(dt / (10**numpy.floor(
numpy.log10(dt)))).astype('|S4') + '*1e' + numpy.floor(
numpy.log10(dt)).astype('|S2')
string = 'Build_Signal(Build_With_Units($VALUE,"rho"),$, Build_Dim(Build_Window(0,' + \
str(self.RhoT2Time.size - 1) + ',' + \
str(self.RhoT2Time.min()) + '),*:*:' + timeS + '))'
expr = mds.Data.compile(string, mds.Float64Array(self.RhoT2))
dummy.putData(expr)
dummy.setUnits(' ')
class BNC845(MDSplus.Device):
"""Control functions for the BNC generator supplied by FZ Juelich, based on BNCCommunication.py by A. Kraemer-Flecken ([email protected]). Can be tested with script sim_bncgen from the MDSplusW7X project."""
parts = [
{
'path': ':HOST',
'type': 'TEXT',
'options': ('no_write_shot', ),
'value': '192.168.0.100'
},
{
'path': ':PORT',
'type': 'NUMERIC',
'options': ('no_write_shot', ),
'value': 18
},
{
'path': ':TRIG_SRC',
'type': 'TEXT',
'options': ('no_write_shot', ),
'value': 'external'
},
{
'path': ':TRIG_SLOPE',
'type': 'TEXT',
'options': ('no_write_shot', ),
'value': 'pos'
},
{
'path': ':BLANKING',
'type': 'NUMERIC',
'options': ('no_write_shot', ),
'value': 0
}, # on/off
{
'path': ':POWER',
'type': 'NUMERIC',
'options': ('no_write_shot', ),
'value': 10
}, # dBm
{
'path': ':OFFSET',
'type': 'NUMERIC',
'options': ('no_write_shot', ),
'value': 30
}, # MHz
{
'path': ':SWEEPS',
'type': 'NUMERIC',
'options': ('no_write_shot', ),
'value': 3
},
{
'path':
':STEPS',
'type':
'NUMERIC',
'options': ('no_write_shot', ),
'value':
MDSplus.Float64Array([[5000, 23.2], [10000, 23.4], [15000, 23.6],
[20000, 23.8], [25000, 24.0], [30000, 24.2],
[35000, 24.4], [40000, 24.6], [45000, 24.8]])
}, # ms, GHz
{
'path':
':DEINI_ACTION',
'type':
'ACTION',
'options': ('no_write_shot', ),
'valueExpr':
"Action(Dispatch('MAIN_SERVER', 'DEINIT', 1, None), Method(None, 'off', head))"
},
{
'path':
':INIT_ACTION',
'type':
'ACTION',
'options': ('no_write_shot', ),
'valueExpr':
"Action(Dispatch('MAIN_SERVER', 'INIT', 1, None), Method(None, 'init', head))"
},
{
'path': ':INIT_LOG',
'type': 'TEXT',
'options': ('no_write_model', 'write_once')
},
{
'path': ':INIT_CONFIG',
'type': 'TEXT',
'options': ('no_write_model', 'write_once')
}
]
def init(self, disable_rf=None):
#### read config nodes ####
try:
host = self.host.data()
port = self.port.data()
trig_src = self.trig_src.data()
trig_slope = self.trig_slope.data()
blanking = self.blanking.data()
power = self.power.data()
offset = self.offset.data()
sweeps = self.sweeps.data()
steps = self.steps.data()
except:
print('One or more configs is missing or invalid.')
return 0
delay = 0.0 # constant, not confirgurable
#### build buffers ####
freq_buf = ''
power_buf = ''
delay_buf = ''
dwell_buf = ''
if len(steps.shape) < 2:
steps = steps.reshape(1, 2)
N = steps.shape[0]
for i in range(N):
dwell = (steps[i][0] -
steps[i - 1][0] if i > 0 else steps[i][0]) / 1e3
freq = steps[i][1] * 1e9 / 2.0
freq_buf += (', ' if i > 0 else '') + str(freq)
power_buf += (', ' if i > 0 else '') + str(power)
delay_buf += (', ' if i > 0 else '') + str(delay)
dwell_buf += (', ' if i > 0 else '') + str(dwell)
#### program BNC ####
log = str(datetime.datetime.utcnow()) + '\n' # first line of INIT_LOG
(sock, remote_ip) = bnc_connect(host, port)
log += 'Connected to %s (%s)\n' % (host, remote_ip)
ans = bnc_talk(sock, '*TST?')
if '0' in ans:
log += 'All tests passed sucessfully.\n'
else:
log += 'One or more tests failed.'
sock.close()
self.init_log.putData(log)
return 0
all_ok = True
ans = bnc_talk(sock, '*IDN?')
config = 'Identification: ' + ans + '\n' # first line of INIT_CONFIG
ans = bnc_talk(sock, 'syst:vers?')
config += 'SCPI version number: ' + ans + '\n'
ans = bnc_talk(sock, 'freq:mode fix')
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'BNC sweep mode stopped: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, ':list:freq ' + freq_buf)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set frequencies: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, ':list:freq?')
freq_list = ans.split(',')
ans = bnc_talk(sock, ':list:power ' + power_buf)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set power: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, ':list:power?')
power_list = ans.split(',')
ans = bnc_talk(sock, ':list:delay ' + delay_buf)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set delay time: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, ':list:delay?')
delay_list = ans.split(',')
ans = bnc_talk(sock, ':list:dwell ' + dwell_buf)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set dwell time: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, ':list:dwell?')
dwell_list = ans.split(',')
if len(freq_list) == N and len(power_list) == N and len(
delay_list) == N and len(dwell_list) == N:
config += 'Frequency/power/delay/duration settings:\n'
for i in range(N):
config += ' Step %d: %s [GHz] %s [dBm] %s [s] %s [s]\n' % (
i, freq_list[i], power_list[i], delay_list[i],
dwell_list[i])
ans = bnc_talk(sock, 'sour:list:count ' + str(sweeps))
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Repetition rate set: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'sour:list:count?')
config += 'Repetition is set to: ' + ans + '\n'
ans = bnc_talk(sock, 'sour2:coup on')
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Source 2 coupled to source 1: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'sour2:coup?')
config += 'Source 2 coupled to source 1: ' + \
('Yes' if '1' in ans else 'No') + '\n'
ans = bnc_talk(sock, 'sour2:coup:offset %0.6fe6' % offset)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set source 2 offset: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'sour2:coup:offset?')
config += 'Offset of source 2 is set to: ' + ans + '\n'
ans = bnc_talk(sock, 'trigger:type normal')
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set trigger type: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'trigger:source ' + trig_src)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set trigger source: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'trigger:source?')
config += 'Trigger is set to: ' + ans + '\n'
ans = bnc_talk(sock, 'trigger:slope ' + trig_slope)
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set trigger slope: ' + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'trigger:slope?')
config += 'Triggered slope: ' + ans + '\n'
ans = bnc_talk(sock,
'output:blanking ' + ('on' if blanking != 0 else 'off'))
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'RF output blanking ' + \
('on: ' if blanking != 0 else 'off: ') + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'output:blanking?')
config += 'RF output blanking: ' + \
('Yes' if '1' in ans else 'No') + '\n'
ans = bnc_talk(
sock, 'output:state ' + ('off' if disable_rf != None else 'on'))
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Output ' + ('disabled: ' if disable_rf != None else
'enabled: ') + ans + bnc_report(ok) + '\n'
ans = bnc_talk(sock, 'freq:mode list')
(ok, all_ok) = bnc_check(ans, all_ok)
log += 'Set frequencies to list mode: ' + ans + bnc_report(ok)
ans = bnc_talk(sock, 'freq:mode?')
config += 'Frequency mode set to: ' + ans
sock.close()
self.init_log.putData(log)
self.init_config.putData(config)
return 1 if all_ok else 0
def off(self, arg):
(sock, remote_ip) = bnc_connect(self.host.data(), self.port.data())
ans = bnc_talk(sock, 'output:state off')
(ok, all_ok) = bnc_check(ans, True)
sock.close()
return ok
def GetModelParameterData(ParameterStruct, numOfParameters):
paramList = []
for paramIdx in range(numOfParameters):
# name is retrieved
retrievedName = WrapperLib.WCAPI_GetModelParameterName(
ParameterStruct, paramIdx)
retrievedName = retrievedName.decode("utf-8")
# type is retrieved
retrievedTypeIdx = WrapperLib.WCAPI_GetModelParameterDataTypeIdx(
ParameterStruct, paramIdx)
retrievedSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, retrievedTypeIdx)
retrievedCTypename = WrapperLib.WCAPI_GetDataTypeCName(
DataTypeMap, retrievedTypeIdx)
retrievedCTypename = retrievedCTypename.decode("utf-8")
if retrievedSLIdType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif retrievedSLIdType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif retrievedSLIdType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif retrievedSLIdType == 3:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_uint8
elif retrievedSLIdType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif retrievedSLIdType == 5:
MARTe2Typename = 'uint16'
pythonTypename = ctypes.c_uint16
elif retrievedSLIdType == 6:
MARTe2Typename = 'int32'
pythonTypename = ctypes.c_int32
elif retrievedSLIdType == 7:
MARTe2Typename = 'uint32'
pythonTypename = ctypes.c_uint32
elif retrievedSLIdType == 8:
MARTe2Typename = 'bool'
pythonTypename = ctypes.c_bool
else:
raise Exception('Unsupported parameter datatype.')
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
paramPointer = ctypes.cast(paramDataAddr,
ctypes.POINTER(pythonTypename))
# dimensions are retrieved
dimIdx = WrapperLib.WCAPI_GetModelParameterDimensionIdx(
ParameterStruct, paramIdx)
dimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap,
dimIdx) # Starting position in the dimensionArray
dimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, dimIdx
) # Number of elements in the dimensionArray referring to this signal
currDimension = []
for currIdx in range(dimNum):
currDimension.append(DimensionArray[dimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0] * currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if retrievedSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif retrievedSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif retrievedSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif retrievedSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif retrievedSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif retrievedSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif retrievedSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif retrievedSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
# retrieved data is saved to a dictionary
paramDict = dict(name='Parameters.' + retrievedName,
type=MARTe2Typename,
dimensions=dimension,
value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
return paramList
def GetModelParameterFields(structTypeIdx, ParameterStruct, paramIdx, baseParName, paramList, recLev ):
if recLev == 10:
raise Exception
numFields = WrapperLib.WCAPI_GetDataTypeNumElements(
DataTypeMap, structTypeIdx)
elementMapIndex = WrapperLib.WCAPI_GetDataTypeElemMapIndex(
DataTypeMap, structTypeIdx)
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
#print('NUM FIELDS: '+str(numFields))
for fieldIdx in range(numFields):
fieldName = WrapperLib.WCAPI_GetElementName(
ElementMap, elementMapIndex + fieldIdx)
fieldName = fieldName.decode("utf-8")
#print('FIELD: '+baseParName+'-'+fieldName)
fieldOffset = WrapperLib.WCAPI_GetElementOffset(
ElementMap, elementMapIndex + fieldIdx)
fieldTypeIdx = WrapperLib.WCAPI_GetElementDataTypeIdx(
ElementMap, elementMapIndex + fieldIdx)
#print('fieldTypeIdx: '+str(fieldTypeIdx))
fieldSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, fieldTypeIdx)
#print('fieldSLIdType: '+str(fieldSLIdType))
if fieldSLIdType == 0:
fieldMARTe2Typename = 'float64'
fieldPythonTypename = ctypes.c_double
elif fieldSLIdType == 1:
fieldMARTe2Typename = 'float32'
fieldPythonTypename = ctypes.c_float
elif fieldSLIdType == 2:
fieldMARTe2Typename = 'int8'
fieldPythonTypename = ctypes.c_int8
elif fieldSLIdType == 3:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_uint8
elif fieldSLIdType == 4:
fieldMARTe2Typename = 'int16'
fieldPythonTypename = ctypes.c_int16
elif fieldSLIdType == 5:
fieldMARTe2Typename = 'uint16'
fieldPythonTypename = ctypes.c_uint16
elif fieldSLIdType == 6:
fieldMARTe2Typename = 'int32'
fieldPythonTypename = ctypes.c_int32
elif fieldSLIdType == 7:
fieldMARTe2Typename = 'uint32'
fieldPythonTypename = ctypes.c_uint32
elif fieldSLIdType == 8:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_int8
elif fieldSLIdType == 254:
fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, fieldTypeIdx)
if fieldEnumType == 0:
fieldMARTe2Typename = 'float64'
fieldPythonTypename = ctypes.c_double
elif fieldEnumType == 1:
fieldMARTe2Typename = 'float32'
fieldPythonTypename = ctypes.c_float
elif fieldEnumType == 2:
fieldMARTe2Typename = 'int8'
fieldPythonTypename = ctypes.c_int8
elif fieldEnumType == 3:
fieldMARTe2Typename = 'uint8'
fieldPythonTypename = ctypes.c_uint8
elif fieldEnumType == 4:
fieldMARTe2Typename = 'int16'
fieldPythonTypename = ctypes.c_int16
elif fieldEnumType == 5:
fieldMARTe2Typename = 'uint16'
fieldPythonTypename = ctypes.c_uint16
elif fieldEnumType == 6:
fieldMARTe2Typename = 'int32'
fieldPythonTypename = ctypes.c_int32
elif fieldEnumType == 7:
fieldMARTe2Typename = 'uint32'
fieldPythonTypename = ctypes.c_uint32
else:
print('type '+str(fieldEnumType))
raise Exception('Unsupported Enum datatype.')
else: #NESTED STRUCTURES!!!!!!!!!!!!!!!!
#print('TYPE '+str(fieldSLIdType) + ' '+str(fieldTypeIdx))
GetModelParameterFields(fieldTypeIdx, ParameterStruct, paramIdx, baseParName + '-'+fieldName, paramList, recLev+1)
continue #no direct data associated
# field dimensions
# dimensions are retrieved
fieldDimIdx = WrapperLib.WCAPI_GetElementDimensionIdx(
ElementMap, elementMapIndex + fieldIdx)
fieldDimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap, fieldDimIdx) # Starting position in the dimensionArray
# Number of elements in the dimensionArray referring to this signal
fieldDimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, fieldDimIdx)
#print('fieldDimNum: '+ str(fieldDimNum))
currDimension = []
for currIdx in range(fieldDimNum):
currDimension.append(
DimensionArray[fieldDimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1:
fieldDimension = 0
elif currDimension[0] == 1 or currDimension[1] == 1:
fieldDimension = [
currDimension[0]*currDimension[1]]
else:
fieldDimension = currDimension
currParAddress = paramDataAddr + fieldOffset
paramPointer = ctypes.cast(
currParAddress, ctypes.POINTER(fieldPythonTypename))
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0]*currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if fieldSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif fieldSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif fieldSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif fieldSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif fieldSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif fieldSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif fieldSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif fieldSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
elif fieldSLIdType == 8:
mdsplusValue = MDSplus.Uint8Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
paramDict = dict(name=baseParName+'-'+fieldName,
type=fieldMARTe2Typename, dimensions=fieldDimension, value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
def GetModelParameterData(ParameterStruct, numOfParameters):
paramList = []
for paramIdx in range(numOfParameters):
# name is retrieved
retrievedName = WrapperLib.WCAPI_GetModelParameterName(
ParameterStruct, paramIdx)
retrievedName = retrievedName.decode("utf-8")
#print('retrievedname: ', retrievedName)
# type is retrieved
retrievedTypeIdx = WrapperLib.WCAPI_GetModelParameterDataTypeIdx(
ParameterStruct, paramIdx)
#print('retrievedTypeIdx: ', str(retrievedTypeIdx))
retrievedSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
DataTypeMap, retrievedTypeIdx)
#print('retrievedSLIdType: ', str(retrievedSLIdType))
#retrievedCTypename = WrapperLib.WCAPI_GetDataTypeCName(
# DataTypeMap, retrievedTypeIdx)
#retrievedCTypename = retrievedCTypename.decode("utf-8")
#print('retrievedCTypename: '+retrievedCTypename)
if retrievedSLIdType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif retrievedSLIdType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif retrievedSLIdType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif retrievedSLIdType == 3:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_uint8
elif retrievedSLIdType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif retrievedSLIdType == 5:
MARTe2Typename = 'uint16'
pythonTypename = ctypes.c_uint16
elif retrievedSLIdType == 6:
MARTe2Typename = 'int32'
pythonTypename = ctypes.c_int32
elif retrievedSLIdType == 7:
MARTe2Typename = 'uint32'
pythonTypename = ctypes.c_uint32
elif retrievedSLIdType == 8:
MARTe2Typename = 'uint8'
pythonTypename = ctypes.c_bool
elif retrievedSLIdType == 254:
fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, retrievedTypeIdx)
if fieldEnumType == 0:
MARTe2Typename = 'float64'
pythonTypename = ctypes.c_double
elif fieldEnumType == 1:
MARTe2Typename = 'float32'
pythonTypename = ctypes.c_float
elif fieldEnumType == 2:
MARTe2Typename = 'int8'
pythonTypename = ctypes.c_int8
elif fieldEnumType == 3:
pythonTypename = ctypes.c_uint8
MARTe2Typename = 'uint8'
elif fieldEnumType == 4:
MARTe2Typename = 'int16'
pythonTypename = ctypes.c_int16
elif fieldEnumType == 5:
pythonTypename = ctypes.c_uint16
MARTe2Typename = 'uint16'
elif fieldEnumType == 6:
pythonTypename = ctypes.c_int32
MARTe2Typename = 'int32'
elif fieldEnumType == 7:
pythonTypename = ctypes.c_uint32
MARTe2Typename = 'uint32'
else:
print('type '+str(fieldEnumType))
raise Exception('Unsupported Enum datatype.')
elif retrievedSLIdType == 255:
pass
else:
raise Exception('Unsupported parameter datatype.')
if retrievedSLIdType != 255:
# actual parameter value is retrieved
paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
ParameterStruct, paramIdx)
paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
DataAddrMap, paramAddrIdx)
paramPointer = ctypes.cast(
paramDataAddr, ctypes.POINTER(pythonTypename))
# dimensions are retrieved
dimIdx = WrapperLib.WCAPI_GetModelParameterDimensionIdx(
ParameterStruct, paramIdx)
dimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
DimensionMap, dimIdx) # Starting position in the dimensionArray
# Number of elements in the dimensionArray referring to this signal
dimNum = WrapperLib.WCAPI_GetNumDims(
DimensionMap, dimIdx)
currDimension = []
for currIdx in range(dimNum):
currDimension.append(DimensionArray[dimArrayIdx + currIdx])
if currDimension[0] == 1 and currDimension[1] == 1: # scalar
dimension = 0
mdsplusValue = paramPointer[0]
elif currDimension[0] == 1: # vector
dimension = currDimension[0]*currDimension[1]
valueList = []
for idx in range(dimension):
valueList.append(paramPointer[idx])
else:
# matrix or column vector (MARTe2 sees column vectors as matrices)
dimension = currDimension
idx = 0
valueList = []
valueRow = []
for nRow in range(currDimension[0]):
for nCol in range(currDimension[1]):
valueRow.append(paramPointer[idx])
idx = idx + 1
valueList.append(valueRow)
valueRow = []
if currDimension[0] != 1 or currDimension[1] != 1:
if retrievedSLIdType == 0:
mdsplusValue = MDSplus.Float32Array(valueList)
elif retrievedSLIdType == 1:
mdsplusValue = MDSplus.Float64Array(valueList)
elif retrievedSLIdType == 2:
mdsplusValue = MDSplus.Int8Array(valueList)
elif retrievedSLIdType == 3:
mdsplusValue = MDSplus.Uint8Array(valueList)
elif retrievedSLIdType == 4:
mdsplusValue = MDSplus.Int16Array(valueList)
elif retrievedSLIdType == 5:
mdsplusValue = MDSplus.Uint16Array(valueList)
elif retrievedSLIdType == 6:
mdsplusValue = MDSplus.Int32Array(valueList)
elif retrievedSLIdType == 7:
mdsplusValue = MDSplus.Uint32Array(valueList)
else:
raise Exception('Unsupported parameter datatype.')
# retrieved data is saved to a dictionary
paramDict = dict(name='Parameters.'+retrievedName,
type=MARTe2Typename, dimensions=dimension, value=mdsplusValue)
# dictionary is appended to the MDSplus-style list
paramList.append(paramDict)
else: #retrievedSLIdType == 255 SRUCTURED PARAMETERS
GetModelParameterFields(retrievedTypeIdx, ParameterStruct, paramIdx, 'Parameters.'+retrievedName, paramList, 1)
#numFields = WrapperLib.WCAPI_GetDataTypeNumElements(
#DataTypeMap, retrievedTypeIdx)
#elementMapIndex = WrapperLib.WCAPI_GetDataTypeElemMapIndex(
#DataTypeMap, retrievedTypeIdx)
## actual parameter value is retrieved
#paramAddrIdx = WrapperLib.WCAPI_GetModelParameterAddrIdx(
#ParameterStruct, paramIdx)
#paramDataAddr = WrapperLib.WCAPI_GetDataAddress(
#DataAddrMap, paramAddrIdx)
#print('NUM FIELDS: '+str(numFields))
#for fieldIdx in range(numFields):
#fieldName = WrapperLib.WCAPI_GetElementName(
#ElementMap, elementMapIndex + fieldIdx)
#fieldName = fieldName.decode("utf-8")
#print('FIELD: '+fieldName)
#fieldOffset = WrapperLib.WCAPI_GetElementOffset(
#ElementMap, elementMapIndex + fieldIdx)
#fieldTypeIdx = WrapperLib.WCAPI_GetElementDataTypeIdx(
#ElementMap, elementMapIndex + fieldIdx)
#fieldSLIdType = WrapperLib.WCAPI_GetDataTypeSLId(
#DataTypeMap, fieldTypeIdx)
#if fieldSLIdType == 0:
#fieldMARTe2Typename = 'float64'
#fieldPythonTypename = ctypes.c_double
#elif fieldSLIdType == 1:
#fieldMARTe2Typename = 'float32'
#fieldPythonTypename = ctypes.c_float
#elif fieldSLIdType == 2:
#fieldMARTe2Typename = 'int8'
#fieldPythonTypename = ctypes.c_int8
#elif fieldSLIdType == 3:
#fieldMARTe2Typename = 'uint8'
#fieldPythonTypename = ctypes.c_uint8
#elif fieldSLIdType == 4:
#fieldMARTe2Typename = 'int16'
#fieldPythonTypename = ctypes.c_int16
#elif fieldSLIdType == 5:
#fieldMARTe2Typename = 'uint16'
#fieldPythonTypename = ctypes.c_uint16
#elif fieldSLIdType == 6:
#fieldMARTe2Typename = 'int32'
#fieldPythonTypename = ctypes.c_int32
#elif fieldSLIdType == 7:
#fieldMARTe2Typename = 'uint32'
#fieldPythonTypename = ctypes.c_uint32
#elif fieldSLIdType == 8:
#fieldMARTe2Typename = 'bool'
#fieldPythonTypename = ctypes.c_int8
#elif fieldSLIdType == 254:
#fieldEnumType = WrapperLib.WCAPI_GetDataEnumStorageType(DataTypeMap, fieldTypeIdx)
#if fieldEnumType == 0:
#fieldMARTe2Typename = 'float64'
#fieldPythonTypename = ctypes.c_double
#elif fieldEnumType == 1:
#fieldMARTe2Typename = 'float32'
#fieldPythonTypename = ctypes.c_float
#elif fieldEnumType == 2:
#fieldMARTe2Typename = 'int8'
#fieldPythonTypename = ctypes.c_int8
#elif fieldEnumType == 3:
#fieldMARTe2Typename = 'uint8'
#fieldPythonTypename = ctypes.c_uint8
#elif fieldEnumType == 4:
#fieldMARTe2Typename = 'int16'
#fieldPythonTypename = ctypes.c_int16
#elif fieldEnumType == 5:
#fieldMARTe2Typename = 'uint16'
#fieldPythonTypename = ctypes.c_uint16
#elif fieldEnumType == 6:
#fieldMARTe2Typename = 'int32'
#fieldPythonTypename = ctypes.c_int32
#elif fieldEnumType == 7:
#fieldMARTe2Typename = 'uint32'
#fieldPythonTypename = ctypes.c_uint32
#else:
#print('type '+str(fieldEnumType))
#raise Exception('Unsupported Enum datatype.')
#else:
#print('type '+str(fieldSLIdType))
#raise Exception('Unsupported nested structures.')
## field dimensions
## dimensions are retrieved
#fieldDimIdx = WrapperLib.WCAPI_GetElementDimensionIdx(
#ElementMap, elementMapIndex + fieldIdx)
#fieldDimArrayIdx = WrapperLib.WCAPI_GetDimArrayIndex(
#DimensionMap, fieldDimIdx) # Starting position in the dimensionArray
## Number of elements in the dimensionArray referring to this signal
#fieldDimNum = WrapperLib.WCAPI_GetNumDims(
#DimensionMap, fieldDimIdx)
#currDimension = []
#for currIdx in range(fieldDimNum):
#currDimension.append(
#DimensionArray[fieldDimArrayIdx + currIdx])
#if currDimension[0] == 1 and currDimension[1] == 1:
#fieldDimension = 0
#elif currDimension[0] == 1 or currDimension[1] == 1:
#fieldDimension = [
#currDimension[0]*currDimension[1]]
#else:
#fieldDimension = currDimension
#currParAddress = paramDataAddr + fieldOffset
#paramPointer = ctypes.cast(
#currParAddress, ctypes.POINTER(fieldPythonTypename))
#if currDimension[0] == 1 and currDimension[1] == 1: # scalar
#dimension = 0
#mdsplusValue = paramPointer[0]
#elif currDimension[0] == 1: # vector
#dimension = currDimension[0]*currDimension[1]
#valueList = []
#for idx in range(dimension):
#valueList.append(paramPointer[idx])
#else:
## matrix or column vector (MARTe2 sees column vectors as matrices)
#dimension = currDimension
#idx = 0
#valueList = []
#valueRow = []
#for nRow in range(currDimension[0]):
#for nCol in range(currDimension[1]):
#valueRow.append(paramPointer[idx])
#idx = idx + 1
#valueList.append(valueRow)
#valueRow = []
#if currDimension[0] != 1 or currDimension[1] != 1:
#if fieldSLIdType == 0:
#mdsplusValue = MDSplus.Float32Array(valueList)
#elif fieldSLIdType == 1:
#mdsplusValue = MDSplus.Float64Array(valueList)
#elif fieldSLIdType == 2:
#mdsplusValue = MDSplus.Int8Array(valueList)
#elif fieldSLIdType == 3:
#mdsplusValue = MDSplus.Uint8Array(valueList)
#elif fieldSLIdType == 4:
#mdsplusValue = MDSplus.Int16Array(valueList)
#elif fieldSLIdType == 5:
#mdsplusValue = MDSplus.Uint16Array(valueList)
#elif fieldSLIdType == 6:
#mdsplusValue = MDSplus.Int32Array(valueList)
#elif fieldSLIdType == 7:
#mdsplusValue = MDSplus.Uint32Array(valueList)
#else:
#raise Exception('Unsupported parameter datatype.')
#paramDict = dict(name='Parameters.'+retrievedName+'-'+fieldName,
#type=fieldMARTe2Typename, dimensions=fieldDimension, value=mdsplusValue)
## dictionary is appended to the MDSplus-style list
#paramList.append(paramDict)
#endif STRUCTURED PARAMETER
#endfor parameters
#print('PARAMETRI FATTI')
return paramList
