# Set header information
comment = "Created by Michael Reuter"
# Time needs to be in UTC?
valid_from = "2016-07-14 00:00:00"
# Get geometry information file
inst_name = "CNCS"
detinfo = readFile(geom_input_file)
num_dets = len(detinfo.values()[0])
xml_outfile = inst_name+"_Definition.xml"
det = MantidGeom(inst_name, comment=comment, valid_from=valid_from)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-36.262)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1", "monitor2", "monitor3"],
distance=["-29.949", "-28.706", "-1.416"])
label = "detectors"
det.addComponent(label, label)
doc_handle = det.makeTypeElement(label)
for i in range(num_dets):
detname = BANKFMT % (i+1)
roty = float(detinfo["BankAngle"][i]) + FLIPY
xpos = convert(detinfo["Bank_xpos"][i])
ypos = convert(detinfo["Bank_ypos"][i])
zpos = convert(detinfo["Bank_zpos"][i])
det.addComponent(detname, root=doc_handle)
det.addDetector(xpos, ypos, zpos, ROTX, roty, ROTZ, detname, "eightpack")
return positions
if __name__ == "__main__":
inst_name = "NOMAD"
xml_outfile = inst_name+"_Definition.xml"
# boiler plate stuff
instr = MantidGeom(inst_name,
comment=" Created by Peter Peterson",
valid_from="2017-06-05 00:00:01")
instr.addComment("DEFAULTS")
instr.addSnsDefaults()
instr.addComment("SOURCE")
instr.addModerator(-19.5)
instr.addComment("SAMPLE")
instr.addSamplePosition()
# monitors
instr.addComment("MONITORS")
instr.addMonitorIds([-1,-2])
instr.addMonitors([-0.879475,5.748782], ["monitor1", "monitor2"])
instr.addComment("Shape for monitors")
instr.addComment("TODO: Update to real shape")
instr.addDummyMonitor(0.01, .03)
# TODO choppers and slits could go here
####################
# read the positions of the pixels that was provided
authors = ["Peter Peterson", "Malcolm Guthrie", "Chen Zhang"]
# -- ROOT --
vulcan_geom = MantidGeom(
inst_name,
comment="Created by " + ", ".join(authors),
valid_from="2022-05-15 00:00:01",
)
# -- MISC --
vulcan_geom.addComment("DEFAULTS")
vulcan_geom.addSnsDefaults()
vulcan_geom.addComment("SOURCE")
vulcan_geom.addModerator(L1)
vulcan_geom.addComment("SAMPLE")
vulcan_geom.addSamplePosition()
# -- MONITOR --
vulcan_geom.addComment("MONITORS")
vulcan_geom.addMonitors(distance=[4.83, 1.50],
names=["monitor2", "monitor3"])
# -- ADD BANKS --
# NOTE:
# To compensate for the curved (1,2,3,4,6) and flat (5) banks, the actual
# physical positions is stored at the eight-pack level.
# The bank here is set to (0,0,0) with zero rotations.
logging.info(f"Add Banks")
bank_ids = df["bank"].unique()
lb_pos = ["X", "Y", "Z"]
if __name__ == '__main__':
valid_from = '2021-02-01 00:00:00'
filename = 'MANDI_Definition_{}.xml'.format(valid_from.split()[0])
# read in the detector calibration
detcal = DetCal('SNS/MANDI/MaNDi-February2021.DetCal')
# write the instrument geometry
instr = MantidGeom('MANDI', valid_from=valid_from)
instr.addComment('DEFAULTS')
instr.addSnsDefaults(default_view='spherical_y')
instr.addComment("SOURCE")
instr.addModerator(detcal.l1)
instr.addComment("SAMPLE")
instr.addSamplePosition()
instr.addComment("MONITORS")
instr.addMonitors(distance=[-2.935, -0.898, 1.042],
names=["monitor1", 'monitor2', 'monitor3'])
# add banks here
for bank in detcal.banks:
bank.addToXml(instr)
# shape for detector pixels - ignored by required
instr.addComment(' Pixel for Detectors')
delta = 0.000309
instr.addCuboidPixel("pixel", [-delta, -delta, 0.0], [-delta, delta, 0.0],
[-delta, -delta, -0.0001], [delta, -delta, 0.0],
shape_id="pixel-shape")
# Set header information
comment = "Created by Michael Reuter"
# Time needs to be in UTC?
valid_from = "2012-04-04 14:15:46"
# Get geometry information file
detinfo = readFile(geom_input_file)
num_dets = len(detinfo.values()[0])
xml_outfile = INST_NAME + "_Definition.xml"
det = MantidGeom(INST_NAME, comment=comment, valid_from=valid_from)
det.addSnsDefaults()
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-20.0114)
det.addSamplePosition()
det.addComment("CHOPPERS")
det.addChopper("t0-chopper", -10.51)
det.addVerticalAxisT0Chopper("t0-chopper")
det.addChopper("fermi-chopper", -2.00180)
det.addFermiChopper("fermi-chopper")
det.addComment("MONITORS")
det.addMonitors(names=["monitor1", "monitor2"],
distance=["-1.77808", "8.99184"])
row_id = ""
row_id_list = []
doc_handle = None
for i in range(num_dets):
location = detinfo["Location"][i]
# REMOVE ME: when A and E rows are filled
def tocartesian(r, t, p):
x = r * sin(t) * cos(p)
y = r * sin(t) * sin(p)
z = r * cos(t)
return [x, y, z]
def mirror(x, y, z):
r, t, p = topolar(x, y, z)
r += 2*analyser
t = pi - t
p += pi
return tocartesian(r, t, p)
geometry = MantidGeom(instrument_name, comment=comment, valid_from=valid_from)
geometry.addSnsDefaults(indirect=args.geometrytype != 'N')
geometry.addSamplePosition()
geometry.addModerator(distance=ch12, name="chopper")
geometry.addMonitors(names=["monitor"], distance=[mon], neutronic=args.geometrytype != 'N')
geometry.addDummyMonitor(0.001, 0.001)
geometry.addMonitorIds([0])
geometry.addComponent("single_detectors", "single_detectors")
sds = geometry.makeTypeElement("single_detectors")
sdc = geometry.addComponent("single_pixel", root=sds, blank_location=False)
r = 2*analyser+psd
for i in range(len(SD_azimuths)):
t=SD_azimuths[i]* pi/180.
x = - psd * sin(t)
y = 0.
z = - psd * cos(t)
nx, ny, nz = mirror(x, y, z)
if args.geometrytype == 'N':
def generate_reflection_file(reflection_key):
r"""
Parameters
----------
reflection_key: str
Returns
-------
"""
refl = reflections[reflection_key]
if not os.path.exists(refl['nexus']):
message = '{} not found. Not creating geometry'.format(refl['nexus'])
raise FileExistsError(message)
inst_name = "BASIS"
# Set header information
comment = "Created by Michael Reuter and Jose Borreguero"
# Time needs to be in UTC?
valid_from = "2014-01-01 00:00:00"
xml_outfile = '{}_Definition_Si{}.xml'.format(inst_name, reflection_key)
nfile = h5py.File(refl['nexus'], 'r')
det = MantidGeom(inst_name, comment=comment, valid_from=valid_from)
det.addSnsDefaults(indirect=True)
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-84.0)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"], neutronic=True)
# Create the inelastic banks information
det.addComment('INELASTIC DECTECTORS')
det.addComponent('silicon')
handle_silicon = det.makeTypeElement("silicon")
# Slicer for removing ghosts. Due to the mapping, the ghost tubes sit
# on the same sides of the arrays for all banks.
remove_ghosts = slice(-INELASTIC_TUBES_NGHOST)
for i in range(n_inelastic_banks):
bank_id = "bank%d" % (i+1)
pixel_id = nfile["/entry/instrument/bank%d/pixel_id" % (i+1)].value[remove_ghosts]
distance = nfile["/entry/instrument/bank%d/distance" % (i+1)].value[remove_ghosts]
# theta or polar_angle: angle from the Z-axis towards the X-axis
polar_angle = nfile["/entry/instrument/bank%d/polar_angle" % (i+1)].value[remove_ghosts]
polar_angle *= (180.0/math.pi)
# phi or azimuthal_angle: angle in the XY-plane
azimuthal_angle = nfile["/entry/instrument/bank%d/azimuthal_angle" % (i+1)].value[remove_ghosts]
azimuthal_angle *= (180.0/math.pi)
analyser_wavelength = nfile["/entry/instrument/analyzer%d/wavelength" % (i+1)].value[remove_ghosts]
analyser_wavelength *= refl['ratio_to_irreducible_hkl']
analyser_energy = 81.8042051/analyser_wavelength**2
det.addComponent(bank_id, idlist=bank_id, root=handle_silicon)
xbank, ybank, zbank = pixels_physical_xyz(i)
det.addDetectorPixels(bank_id, x=xbank, y=ybank, z=zbank,
names=pixel_id, energy=analyser_energy,
nr=distance, ntheta=polar_angle,
nphi=azimuthal_angle,
output_efixed=refl['efixed'])
det.addDetectorPixelsIdList(bank_id, r=distance, names=pixel_id,
elg="multiple_ranges")
# Create the diffraction bank information
det.addComponent("elastic", "elastic")
handle = det.makeTypeElement("elastic")
idlist = []
detector_z = [-2.1474825, -1.704594, -1.108373, -0.4135165, 0.3181,
1.0218315, 1.6330115, 2.0993535, 2.376999]
detector_x = [1.1649855, 1.7484015, 2.175541, 2.408594, 2.422933,
2.216378, 1.8142005, 1.247867, 0.5687435]
detector_y = [-0.001807, -0.001801, -0.0011845, -0.0006885, -0.0013145,
-0.001626, -0.001397, 0.0003465, -0.0001125]
for i in range(ELASTIC_BANK_START, ELASTIC_BANK_END+1):
bank_name = "bank%d" % i
det.addComponent(bank_name, root=handle)
k = i - ELASTIC_BANK_START
x_coord = detector_x[k]
y_coord = detector_y[k]
z_coord = detector_z[k]
det.addDetector(x_coord, y_coord, z_coord, 0.0, 0., 90.,
bank_name, "tube-elastic", facingSample=True)
idlist.append(ELASTIC_DETECTORID_START +
ELASTIC_TUBE_NPIXELS*(i-ELASTIC_BANK_START))
idlist.append(ELASTIC_DETECTORID_START +
ELASTIC_TUBE_NPIXELS*(i-ELASTIC_BANK_START) +
ELASTIC_TUBE_NPIXELS-1)
idlist.append(None)
# Diffraction tube information
det.addComment("ELASTIC TUBE (90 degrees)")
det.addPixelatedTube("tube-elastic", ELASTIC_TUBE_NPIXELS,
ELASTIC_TUBE_LENGTH, "pixel-elastic-tube",
neutronic=True, neutronicIsPhysical=True)
# Set the diffraction pixel Ids
det.addDetectorIds("elastic", idlist)
# Creating diffraction pixel
det.addComment("PIXEL FOR DIFFRACTION TUBES")
det.addCylinderPixel("pixel-elastic-tube",
(0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(ELASTIC_TUBE_WIDTH/2.0),
(ELASTIC_TUBE_LENGTH/ELASTIC_TUBE_NPIXELS))
det.addComment("PIXEL FOR INELASTIC TUBES")
det.addCylinderPixel("pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
INELASTIC_TUBE_WIDTH * (1.0-INELASTIC_PIXEL_RADIUS_GAP_RATIO) / 2.0,
INELASTIC_TUBE_LENGTH * (1.0-INELASTIC_PIXEL_HEIGHT_GAP_RATIO) / INELASTIC_TUBE_NPIXEL,
is_type="detector", algebra="cyl-approx")
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)
# Always clean after yourself
nfile.close()
def main():
from helper import MantidGeom
inst_name = "VISION"
xml_outfile = inst_name + "_Definition.xml"
det = MantidGeom(inst_name, comment=" Created by Stuart Campbell ")
det.addSnsDefaults(indirect=True)
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-16.0)
det.addSamplePosition()
# Backscattering Banks are 21-100
BACKSCATTERING_NTUBES = 80
det.addComponent("elastic-backscattering", "elastic-backscattering")
handle = det.makeTypeElement("elastic-backscattering")
idlist = []
for k in range(BACKSCATTERING_NTUBES):
id_start = 26624 + (256 * k)
id_end = 26624 + (256 * k) + 255
angle = -(2.25 + 4.5 * k)
bankid = 21 + k
bank_name = "bank%d" % bankid
det.addComponent(bank_name, root=handle)
z_coord = -0.998
if k % 2 == 0:
# Even tube number (long)
centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS + (
BS_ELASTIC_LONG_TUBE_LENGTH / 2.0)
#centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS
component_name = "tube-long-bs-elastic"
else:
# Odd tube number (short)
centre_offset = BS_ELASTIC_SHORT_TUBE_INNER_RADIUS + (
BS_ELASTIC_SHORT_TUBE_LENGTH / 2.0)
component_name = "tube-short-bs-elastic"
x_coord = centre_offset * math.cos(math.radians(90 - angle))
y_coord = centre_offset * math.sin(math.radians(90 - angle))
det.addDetector(x_coord, y_coord, z_coord, 0, 0, -angle, bank_name,
component_name)
idlist.append(id_start)
idlist.append(id_end)
idlist.append(None)
det.addDetectorIds("elastic-backscattering", idlist)
# 90 elastic banks
elastic_banklist = [3, 6, 9, 12, 15, 18]
elastic_bank_start = [2048, 6144, 10240, 14336, 18432, 22528]
elastic_angle = [22.5, -22.5, -67.5, -112.5, -157.5, 157.5]
sample_elastic_distance = 0.635
det.addComponent("elastic", "elastic")
handle = det.makeTypeElement("elastic")
idlist = []
elastic_index = 0
for i in elastic_banklist:
bank_name = "bank%d" % i
det.addComponent(bank_name, root=handle)
z_coord = 0.0
x_coord = sample_elastic_distance * math.cos(
math.radians(elastic_angle[elastic_index]))
y_coord = sample_elastic_distance * math.sin(
math.radians(elastic_angle[elastic_index]))
det.addDetector(x_coord,
y_coord,
z_coord,
-90.0,
0,
0.,
bank_name,
"eightpack-elastic",
facingSample=True)
idlist.append(elastic_bank_start[elastic_index])
idlist.append(elastic_bank_start[elastic_index] + 2047)
idlist.append(None)
elastic_index += 1
det.addDetectorIds("elastic", idlist)
# Inelastic
inelastic_banklist = [1, 2, 4, 5, 7, 8, 10, 11, 13, 14, 16, 17, 19, 20]
inelastic_bank_start = [
0, 1024, 4096, 5120, 8192, 9216, 12288, 13312, 16384, 17408, 20480,
21504, 24576, 25600
]
inelastic_angle = [
45.0, 45.0, 0.0, 0.0, -45.0, -45.0, -90.0, -90.0, -135.0, -135.0,
180.0, 180.0, 135.0, 135.0
]
inelastic_angle_for_rotation = [
-45.0, -45.0, 180.0, 180.0, -135.0, -135.0, -90.0, -90.0, -225.0,
-225.0, 0.0, 0.0, 45.0, 45.0
]
sample_inelastic_distance = 0.5174
det.addComponent("inelastic", "inelastic")
handle = det.makeTypeElement("inelastic")
idlist = []
inelastic_index = 0
for i in inelastic_banklist:
bank_name = "bank%d" % i
bank_comp = det.addComponent(bank_name,
root=handle,
blank_location=True)
# location_element = le.SubElement(bank_comp, "location")
# le.SubElement(location_element, "rot", **{"val":"90", "axis-x":"0",
# "axis-y":"0", "axis-z":"1"})
# Neutronic Positions
z_coord_neutronic = sample_inelastic_distance * math.tan(
math.radians(45.0))
if inelastic_index % 2 == 0:
# Facing Downstream
z_coord = 0.01
else:
# Facing to Moderator
z_coord = -0.01
z_coord_neutronic = -z_coord_neutronic
# Physical Positions
x_coord = sample_inelastic_distance * math.cos(
math.radians(inelastic_angle[inelastic_index]))
y_coord = sample_inelastic_distance * math.sin(
math.radians(inelastic_angle[inelastic_index]))
det.addDetector(-x_coord,
y_coord,
z_coord,
0,
0,
inelastic_angle_for_rotation[inelastic_index] - 90.0,
bank_name,
"eightpack-inelastic",
neutronic=True,
nx=-x_coord,
ny=y_coord,
nz=z_coord_neutronic)
efixed = ("Efixed", "3.64", "meV")
det.addDetectorParameters(bank_name, efixed)
idlist.append(inelastic_bank_start[inelastic_index])
idlist.append(inelastic_bank_start[inelastic_index] + 1023)
idlist.append(None)
inelastic_index += 1
det.addDetectorIds("inelastic", idlist)
# 8 packs
det.addComment("INELASTIC 8-PACK")
det.addNPack("eightpack-inelastic",
INELASTIC_TUBES_PER_BANK,
INELASTIC_TUBE_WIDTH,
INELASTIC_AIR_GAP,
"tube-inelastic",
neutronic=True)
det.addComment("ELASTIC 8-PACK")
det.addNPack("eightpack-elastic",
ELASTIC_TUBES_PER_BANK,
ELASTIC_TUBE_WIDTH,
ELASTIC_AIR_GAP,
"tube-elastic",
neutronic=True,
neutronicIsPhysical=True)
# TUBES
det.addComment("INELASTIC TUBE")
det.addPixelatedTube("tube-inelastic",
INELASTIC_TUBE_NPIXELS,
INELASTIC_TUBE_LENGTH,
"pixel-inelastic-tube",
neutronic=True)
det.addComment("BACKSCATTERING LONG TUBE")
det.addPixelatedTube("tube-long-bs-elastic",
BS_ELASTIC_LONG_TUBE_NPIXELS,
BS_ELASTIC_LONG_TUBE_LENGTH,
"pixel-bs-elastic-long-tube",
neutronic=True,
neutronicIsPhysical=True)
det.addComment("BACKSCATTERING SHORT TUBE")
det.addPixelatedTube("tube-short-bs-elastic",
BS_ELASTIC_SHORT_TUBE_NPIXELS,
BS_ELASTIC_SHORT_TUBE_LENGTH,
"pixel-bs-elastic-short-tube",
neutronic=True,
neutronicIsPhysical=True)
det.addComment("ELASTIC TUBE (90 degrees)")
det.addPixelatedTube("tube-elastic",
ELASTIC_TUBE_NPIXELS,
ELASTIC_TUBE_LENGTH,
"pixel-elastic-tube",
neutronic=True,
neutronicIsPhysical=True)
# PIXELS
det.addComment("PIXEL FOR INELASTIC TUBES")
det.addCylinderPixel("pixel-inelastic-tube", (0.0, 0.0, 0.0),
(0.0, 1.0, 0.0), (INELASTIC_TUBE_WIDTH / 2.0),
(INELASTIC_TUBE_LENGTH / INELASTIC_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (LONG)")
det.addCylinderPixel(
"pixel-bs-elastic-long-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_LONG_TUBE_WIDTH / 2.0),
(BS_ELASTIC_LONG_TUBE_LENGTH / BS_ELASTIC_LONG_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (SHORT)")
det.addCylinderPixel(
"pixel-bs-elastic-short-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_SHORT_TUBE_WIDTH / 2.0),
(BS_ELASTIC_SHORT_TUBE_LENGTH / BS_ELASTIC_SHORT_TUBE_NPIXELS))
det.addComment("PIXEL FOR ELASTIC TUBES (90 degrees)")
det.addCylinderPixel("pixel-elastic-tube", (0.0, 0.0, 0.0),
(0.0, 1.0, 0.0), (ELASTIC_TUBE_WIDTH / 2.0),
(ELASTIC_TUBE_LENGTH / ELASTIC_TUBE_NPIXELS))
det.addComment(" ##### MONITORS ##### ")
det.addMonitors(names=["monitor1"], distance=["-6.71625"], neutronic=True)
# MONITORS
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.showGeom()
det.writeGeom(xml_outfile)
tube_width = 0.685
tube_radius = 0.0127
number_of_tubes = 8
tube_angles = [12, 31, 50, 69, 88, 107, 126, 145]
vertical_offset = 0.015
distance_to_sample = 1.855
chopper_to_sample = -34.3
monitor_to_sample = -0.178
in16b = MantidGeom(instrument_name, comment=comment, valid_from=valid_from)
in16b.addSnsDefaults(default_view='3D', axis_view_3d='z-', theta_sign_axis="x")
in16b.addComment("Sample position")
in16b.addSamplePosition()
in16b.addComment("Chopper position")
in16b.addModerator(distance=chopper_to_sample, name="chopper")
in16b.addComment("MONITOR")
in16b.addMonitors(names=["monitor"], distance=[monitor_to_sample])
in16b.addDummyMonitor(0.001, 0.001)
in16b.addMonitorIds([0])
in16b.addComment("Detector")
in16b.addComponentILL("detector", 0, 0, 0)
detector = in16b.makeTypeElement("detector")
# create tubes id lists
for i in range(number_of_tubes):
def generate_reflection_file(reflection_key):
r"""
Parameters
----------
reflection_key: str
Returns
-------
"""
refl = reflections[reflection_key]
if not os.path.exists(refl['nexus']):
message = '{} not found. Not creating geometry'.format(refl['nexus'])
raise FileExistsError(message)
inst_name = "BASIS"
# Set header information
comment = "Created by Michael Reuter and Jose Borreguero"
# Time needs to be in UTC?
valid_from = "2014-01-01 00:00:00"
xml_outfile = '{}_Definition_Si{}.xml'.format(inst_name, reflection_key)
nfile = h5py.File(refl['nexus'], 'r')
det = MantidGeom(inst_name, comment=comment, valid_from=valid_from)
det.addSnsDefaults(indirect=True)
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-84.0)
det.addSamplePosition()
det.addComment("MONITORS")
det.addMonitors(names=["monitor1"], distance=["-0.23368"], neutronic=True)
# Create the inelastic banks information
det.addComment('INELASTIC DECTECTORS')
det.addComponent('silicon')
handle_silicon = det.makeTypeElement("silicon")
# Slicer for removing ghosts. Due to the mapping, the ghost tubes sit
# on the same sides of the arrays for all banks.
remove_ghosts = slice(-INELASTIC_TUBES_NGHOST)
for i in range(n_inelastic_banks):
bank_id = "bank%d" % (i + 1)
pixel_id = nfile["/entry/instrument/bank%d/pixel_id" %
(i + 1)].value[remove_ghosts]
distance = nfile["/entry/instrument/bank%d/distance" %
(i + 1)].value[remove_ghosts]
# theta or polar_angle: angle from the Z-axis towards the X-axis
polar_angle = nfile["/entry/instrument/bank%d/polar_angle" %
(i + 1)].value[remove_ghosts]
polar_angle *= (180.0 / math.pi)
# phi or azimuthal_angle: angle in the XY-plane
azimuthal_angle = nfile["/entry/instrument/bank%d/azimuthal_angle" %
(i + 1)].value[remove_ghosts]
azimuthal_angle *= (180.0 / math.pi)
analyser_wavelength = nfile["/entry/instrument/analyzer%d/wavelength" %
(i + 1)].value[remove_ghosts]
analyser_wavelength *= refl['ratio_to_irreducible_hkl']
analyser_energy = 81.8042051 / analyser_wavelength**2
det.addComponent(bank_id, idlist=bank_id, root=handle_silicon)
xbank, ybank, zbank = pixels_physical_xyz(i)
det.addDetectorPixels(bank_id,
x=xbank,
y=ybank,
z=zbank,
names=pixel_id,
energy=analyser_energy,
nr=distance,
ntheta=polar_angle,
nphi=azimuthal_angle,
output_efixed=refl['efixed'])
det.addDetectorPixelsIdList(bank_id,
r=distance,
names=pixel_id,
elg="multiple_ranges")
# Create the diffraction bank information
det.addComponent("elastic", "elastic")
handle = det.makeTypeElement("elastic")
idlist = []
detector_z = [
-2.1474825, -1.704594, -1.108373, -0.4135165, 0.3181, 1.0218315,
1.6330115, 2.0993535, 2.376999
]
detector_x = [
1.1649855, 1.7484015, 2.175541, 2.408594, 2.422933, 2.216378,
1.8142005, 1.247867, 0.5687435
]
detector_y = [
-0.001807, -0.001801, -0.0011845, -0.0006885, -0.0013145, -0.001626,
-0.001397, 0.0003465, -0.0001125
]
for i in range(ELASTIC_BANK_START, ELASTIC_BANK_END + 1):
bank_name = "bank%d" % i
det.addComponent(bank_name, root=handle)
k = i - ELASTIC_BANK_START
x_coord = detector_x[k]
y_coord = detector_y[k]
z_coord = detector_z[k]
det.addDetector(x_coord,
y_coord,
z_coord,
0.0,
0.,
90.,
bank_name,
"tube-elastic",
facingSample=True)
idlist.append(ELASTIC_DETECTORID_START + ELASTIC_TUBE_NPIXELS *
(i - ELASTIC_BANK_START))
idlist.append(ELASTIC_DETECTORID_START + ELASTIC_TUBE_NPIXELS *
(i - ELASTIC_BANK_START) + ELASTIC_TUBE_NPIXELS - 1)
idlist.append(None)
# Diffraction tube information
det.addComment("ELASTIC TUBE (90 degrees)")
det.addPixelatedTube("tube-elastic",
ELASTIC_TUBE_NPIXELS,
ELASTIC_TUBE_LENGTH,
"pixel-elastic-tube",
neutronic=True,
neutronicIsPhysical=True)
# Set the diffraction pixel Ids
det.addDetectorIds("elastic", idlist)
# Creating diffraction pixel
det.addComment("PIXEL FOR DIFFRACTION TUBES")
det.addCylinderPixel("pixel-elastic-tube", (0.0, 0.0, 0.0),
(0.0, 1.0, 0.0), (ELASTIC_TUBE_WIDTH / 2.0),
(ELASTIC_TUBE_LENGTH / ELASTIC_TUBE_NPIXELS))
det.addComment("PIXEL FOR INELASTIC TUBES")
det.addCylinderPixel(
"pixel", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
INELASTIC_TUBE_WIDTH * (1.0 - INELASTIC_PIXEL_RADIUS_GAP_RATIO) / 2.0,
INELASTIC_TUBE_LENGTH * (1.0 - INELASTIC_PIXEL_HEIGHT_GAP_RATIO) /
INELASTIC_TUBE_NPIXEL,
is_type="detector",
algebra="cyl-approx")
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.writeGeom(xml_outfile)
# Always clean after yourself
nfile.close()
def main():
from helper import MantidGeom
inst_name = "VISION"
xml_outfile = inst_name+"_Definition.xml"
comment = " Created by Stuart Campbell "
valid_from = "2013-10-21 00:00:01"
det = MantidGeom(inst_name, comment=comment, valid_from=valid_from)
det.addSnsDefaults(indirect=True)
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-16.0)
det.addSamplePosition()
# Backscattering Banks are 21-100
BACKSCATTERING_NTUBES = 80
BACKSCATTERING_SECTORS = 10
TUBES_PER_SECTOR = BACKSCATTERING_NTUBES / BACKSCATTERING_SECTORS
PIXELS_PER_SECTOR = TUBES_PER_SECTOR * 256
det.addComponent("elastic-backscattering", "elastic-backscattering")
handle = det.makeTypeElement("elastic-backscattering")
idlist = []
for k in range(BACKSCATTERING_SECTORS):
bankid = 15 + k
bank_name = "bank%d" % bankid
#doc_handle = det.makeDetectorElement(bank_name, root=handle)
z_coord = -0.998
id_start = 14336 + (PIXELS_PER_SECTOR * k)
id_end = 14336 + (PIXELS_PER_SECTOR * k) + PIXELS_PER_SECTOR - 1
for l in range(TUBES_PER_SECTOR):
tube_index = (k*TUBES_PER_SECTOR) + l
tube_name = bank_name + "-tube" + str(tube_index+1)
#det.addComponent(tube_name, root=doc_handle)
det.addComponent(tube_name, root=handle)
angle = -(2.25 + 4.5*tube_index)
if tube_index%2 == 0:
# Even tube number (long)
centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS + (BS_ELASTIC_LONG_TUBE_LENGTH/2.0)
#centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS
component_name = "tube-long-bs-elastic"
else:
# Odd tube number (short)
centre_offset = BS_ELASTIC_SHORT_TUBE_INNER_RADIUS + (BS_ELASTIC_SHORT_TUBE_LENGTH/2.0)
component_name = "tube-short-bs-elastic"
x_coord = centre_offset * math.cos(math.radians(90-angle))
y_coord = centre_offset * math.sin(math.radians(90-angle))
det.addDetector( x_coord, y_coord, z_coord, 0, 0, -angle, tube_name, component_name)
idlist.append(id_start)
idlist.append(id_end)
idlist.append(None)
det.addDetectorIds("elastic-backscattering", idlist)
# 90 elastic banks
elastic_banklist = [25,26,27,28,29,30]
elastic_bank_start = [34816,36864,38912,40960,43008,45056]
elastic_angle = [157.5,-157.5,-67.5,-112.5,-22.5,22.5]
sample_elastic_distance = 0.635
det.addComponent("elastic", "elastic")
handle = det.makeTypeElement("elastic")
idlist = []
elastic_index = 0
for i in elastic_banklist:
bank_name = "bank%d" % i
det.addComponent(bank_name, root=handle)
z_coord = 0.0
x_coord = sample_elastic_distance * math.cos(math.radians(elastic_angle[elastic_index]))
y_coord = sample_elastic_distance * math.sin(math.radians(elastic_angle[elastic_index]))
det.addDetector(x_coord, y_coord, z_coord, -90.0, 180, 0., bank_name, "eightpack-elastic", facingSample=True)
idlist.append(elastic_bank_start[elastic_index])
idlist.append(elastic_bank_start[elastic_index]+2047)
idlist.append(None)
elastic_index += 1
det.addDetectorIds("elastic", idlist)
# Inelastic
inelastic_banklist = [1,2,3,4,5,6,7,8,9,10,11,12,13,14]
inelastic_bank_start=[0,1024,2048,3072,4096,5120,6144,7168,8192,9216,10240,11264,12288,13312]
inelastic_angle = [45.0,0.0,-45.0,-90.0,-135.0,-180.0,135.0,45.0,0.0,-45.0,-90.0,-135.0,-180.0,135.0]
inelastic_angle_for_rotation = [-45.0,180.0,-135.0,-90.0,-225.0,0.0,45.0,-45.0,180.0,-135.0,-90.0,-225.0,0.0,45.0]
sample_inelastic_distance = 0.5174
det.addComponent("inelastic", "inelastic")
handle = det.makeTypeElement("inelastic")
idlist = []
inelastic_index = 0
for i in inelastic_banklist:
bank_name = "bank%d" % i
bank_comp = det.addComponent(bank_name, root=handle, blank_location=True)
# location_element = le.SubElement(bank_comp, "location")
# le.SubElement(location_element, "rot", **{"val":"90", "axis-x":"0",
# "axis-y":"0", "axis-z":"1"})
# Neutronic Positions
z_coord_neutronic = sample_inelastic_distance * math.tan(math.radians(45.0))
if inelastic_index+1 > 7:
# Facing Downstream
z_coord = -0.01
else:
# Facing to Moderator
z_coord = 0.01
z_coord_neutronic = -z_coord_neutronic
# Physical Positions
x_coord = sample_inelastic_distance * math.cos(math.radians(inelastic_angle[inelastic_index]))
y_coord = sample_inelastic_distance * math.sin(math.radians(inelastic_angle[inelastic_index]))
det.addDetector(-x_coord, y_coord, z_coord, 0, 0, inelastic_angle_for_rotation[inelastic_index]-90.0, bank_name,
"eightpack-inelastic", neutronic=True, nx=-x_coord, ny=y_coord, nz=z_coord_neutronic)
efixed = ("Efixed", "3.64", "meV")
det.addDetectorParameters(bank_name, efixed )
idlist.append(inelastic_bank_start[inelastic_index])
idlist.append(inelastic_bank_start[inelastic_index]+1023)
idlist.append(None)
inelastic_index += 1
det.addDetectorIds("inelastic", idlist)
# 8 packs
det.addComment("INELASTIC 8-PACK")
det.addNPack("eightpack-inelastic", INELASTIC_TUBES_PER_BANK, INELASTIC_TUBE_WIDTH,
INELASTIC_AIR_GAP, "tube-inelastic", neutronic=True)
det.addComment("ELASTIC 8-PACK")
det.addNPack("eightpack-elastic", ELASTIC_TUBES_PER_BANK, ELASTIC_TUBE_WIDTH,
ELASTIC_AIR_GAP, "tube-elastic", neutronic=True, neutronicIsPhysical=True)
# TUBES
det.addComment("INELASTIC TUBE")
det.addPixelatedTube("tube-inelastic", INELASTIC_TUBE_NPIXELS,
INELASTIC_TUBE_LENGTH, "pixel-inelastic-tube", neutronic=True)
det.addComment("BACKSCATTERING LONG TUBE")
det.addPixelatedTube("tube-long-bs-elastic", BS_ELASTIC_LONG_TUBE_NPIXELS,
BS_ELASTIC_LONG_TUBE_LENGTH, "pixel-bs-elastic-long-tube",
neutronic=True, neutronicIsPhysical=True)
det.addComment("BACKSCATTERING SHORT TUBE")
det.addPixelatedTube("tube-short-bs-elastic", BS_ELASTIC_SHORT_TUBE_NPIXELS,
BS_ELASTIC_SHORT_TUBE_LENGTH, "pixel-bs-elastic-short-tube",
neutronic=True, neutronicIsPhysical=True)
det.addComment("ELASTIC TUBE (90 degrees)")
det.addPixelatedTube("tube-elastic", ELASTIC_TUBE_NPIXELS,
ELASTIC_TUBE_LENGTH, "pixel-elastic-tube", neutronic=True, neutronicIsPhysical=True)
# PIXELS
det.addComment("PIXEL FOR INELASTIC TUBES")
det.addCylinderPixel("pixel-inelastic-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(INELASTIC_TUBE_WIDTH/2.0),
(INELASTIC_TUBE_LENGTH/INELASTIC_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (LONG)")
det.addCylinderPixel("pixel-bs-elastic-long-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_LONG_TUBE_WIDTH/2.0),
(BS_ELASTIC_LONG_TUBE_LENGTH/BS_ELASTIC_LONG_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (SHORT)")
det.addCylinderPixel("pixel-bs-elastic-short-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_SHORT_TUBE_WIDTH/2.0),
(BS_ELASTIC_SHORT_TUBE_LENGTH/BS_ELASTIC_SHORT_TUBE_NPIXELS))
det.addComment("PIXEL FOR ELASTIC TUBES (90 degrees)")
det.addCylinderPixel("pixel-elastic-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(ELASTIC_TUBE_WIDTH/2.0),
(ELASTIC_TUBE_LENGTH/ELASTIC_TUBE_NPIXELS))
det.addComment(" ##### MONITORS ##### ")
det.addMonitors(names=["monitor1","monitor4"], distance=["-6.71625","0.287"], neutronic=True)
# MONITORS
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: All monitors share the dimensions of monitor4.")
det.addCuboidMonitor(0.051,0.054,0.013)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1","-4"])
#det.showGeom()
det.writeGeom(xml_outfile)
def mirror(x, y, z, analyser, project=False):
r, t, p = topolar(x, y, z)
if project:
p = pi
t = pi - atan2(x, z)
r += 2 * analyser - psd
else:
p += pi
t = pi - t
r += 2 * analyser
return tocartesian(r, t, p)
geometry = MantidGeom(instrument_name, comment=comment, valid_from=valid_from)
geometry.addSnsDefaults(indirect=args.geometrytype != 'N')
geometry.addSamplePosition()
geometry.addModerator(distance=ch12, name="chopper")
geometry.addMonitors(names=["monitor"],
distance=[mon],
neutronic=args.geometrytype != 'N')
geometry.addDummyMonitor(0.001, 0.001)
geometry.addMonitorIds([0])
geometry.addComponent("single_detectors",
"single_detectors",
blank_location=False)
sds = geometry.makeTypeElement("single_detectors")
sdc = geometry.addComponent("single_pixel", root=sds)
for i in range(len(SD_azimuths)):
t = SD_azimuths[i] * pi / 180.
x = sd * sin(t)
y = 0.
def main():
from helper import MantidGeom
inst_name = "VISION"
xml_outfile = inst_name+"_Definition.xml"
det = MantidGeom(inst_name, comment=" Created by Stuart Campbell ")
det.addSnsDefaults(indirect=True)
det.addComment("SOURCE AND SAMPLE POSITION")
det.addModerator(-16.0)
det.addSamplePosition()
# Backscattering Banks are 21-100
BACKSCATTERING_NTUBES = 80
det.addComponent("elastic-backscattering", "elastic-backscattering")
handle = det.makeTypeElement("elastic-backscattering")
idlist = []
for k in range(BACKSCATTERING_NTUBES):
id_start = 26624+(256*k)
id_end = 26624 + (256*k) + 255
angle = -(2.25 + 4.5*k)
bankid = 21 + k
bank_name = "bank%d" % bankid
det.addComponent(bank_name, root=handle)
z_coord = -0.998
if k%2 == 0:
# Even tube number (long)
centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS + (BS_ELASTIC_LONG_TUBE_LENGTH/2.0)
#centre_offset = BS_ELASTIC_LONG_TUBE_INNER_RADIUS
component_name = "tube-long-bs-elastic"
else:
# Odd tube number (short)
centre_offset = BS_ELASTIC_SHORT_TUBE_INNER_RADIUS + (BS_ELASTIC_SHORT_TUBE_LENGTH/2.0)
component_name = "tube-short-bs-elastic"
x_coord = centre_offset * math.cos(math.radians(90-angle))
y_coord = centre_offset * math.sin(math.radians(90-angle))
det.addDetector(x_coord, y_coord, z_coord, 0, 0, -angle, bank_name, component_name)
idlist.append(id_start)
idlist.append(id_end)
idlist.append(None)
det.addDetectorIds("elastic-backscattering", idlist)
# 90 elastic banks
elastic_banklist = [3,6,9,12,15,18]
elastic_bank_start = [2048,6144,10240,14336,18432,22528]
elastic_angle = [22.5,-22.5,-67.5,-112.5,-157.5,157.5]
sample_elastic_distance = 0.635
det.addComponent("elastic", "elastic")
handle = det.makeTypeElement("elastic")
idlist = []
elastic_index = 0
for i in elastic_banklist:
bank_name = "bank%d" % i
det.addComponent(bank_name, root=handle)
z_coord = 0.0
x_coord = sample_elastic_distance * math.cos(math.radians(elastic_angle[elastic_index]))
y_coord = sample_elastic_distance * math.sin(math.radians(elastic_angle[elastic_index]))
det.addDetector(x_coord, y_coord, z_coord, -90.0, 0, 0., bank_name, "eightpack-elastic", facingSample=True)
idlist.append(elastic_bank_start[elastic_index])
idlist.append(elastic_bank_start[elastic_index]+2047)
idlist.append(None)
elastic_index += 1
det.addDetectorIds("elastic", idlist)
# Inelastic
inelastic_banklist = [1,2,4,5,7,8,10,11,13,14,16,17,19,20]
inelastic_bank_start=[0,1024,4096,5120,8192,9216,12288,13312,16384,17408,20480,21504,24576,25600]
inelastic_angle = [45.0,45.0,0.0,0.0,-45.0,-45.0,-90.0,-90.0,-135.0,-135.0,180.0,180.0,135.0,135.0]
inelastic_angle_for_rotation = [-45.0,-45.0,180.0,180.0,-135.0,-135.0,-90.0,-90.0,-225.0,-225.0,0.0,0.0,45.0,45.0]
sample_inelastic_distance = 0.5174
det.addComponent("inelastic", "inelastic")
handle = det.makeTypeElement("inelastic")
idlist = []
inelastic_index = 0
for i in inelastic_banklist:
bank_name = "bank%d" % i
bank_comp = det.addComponent(bank_name, root=handle, blank_location=True)
# location_element = le.SubElement(bank_comp, "location")
# le.SubElement(location_element, "rot", **{"val":"90", "axis-x":"0",
# "axis-y":"0", "axis-z":"1"})
# Neutronic Positions
z_coord_neutronic = sample_inelastic_distance * math.tan(math.radians(45.0))
if inelastic_index % 2 == 0:
# Facing Downstream
z_coord = 0.01
else:
# Facing to Moderator
z_coord = -0.01
z_coord_neutronic = -z_coord_neutronic
# Physical Positions
x_coord = sample_inelastic_distance * math.cos(math.radians(inelastic_angle[inelastic_index]))
y_coord = sample_inelastic_distance * math.sin(math.radians(inelastic_angle[inelastic_index]))
det.addDetector(-x_coord, y_coord, z_coord, 0, 0, inelastic_angle_for_rotation[inelastic_index]-90.0, bank_name,
"eightpack-inelastic", neutronic=True, nx=-x_coord, ny=y_coord, nz=z_coord_neutronic)
efixed = ("Efixed", "3.64", "meV")
det.addDetectorParameters(bank_name, efixed )
idlist.append(inelastic_bank_start[inelastic_index])
idlist.append(inelastic_bank_start[inelastic_index]+1023)
idlist.append(None)
inelastic_index += 1
det.addDetectorIds("inelastic", idlist)
# 8 packs
det.addComment("INELASTIC 8-PACK")
det.addNPack("eightpack-inelastic", INELASTIC_TUBES_PER_BANK, INELASTIC_TUBE_WIDTH,
INELASTIC_AIR_GAP, "tube-inelastic", neutronic=True)
det.addComment("ELASTIC 8-PACK")
det.addNPack("eightpack-elastic", ELASTIC_TUBES_PER_BANK, ELASTIC_TUBE_WIDTH,
ELASTIC_AIR_GAP, "tube-elastic", neutronic=True, neutronicIsPhysical=True)
# TUBES
det.addComment("INELASTIC TUBE")
det.addPixelatedTube("tube-inelastic", INELASTIC_TUBE_NPIXELS,
INELASTIC_TUBE_LENGTH, "pixel-inelastic-tube", neutronic=True)
det.addComment("BACKSCATTERING LONG TUBE")
det.addPixelatedTube("tube-long-bs-elastic", BS_ELASTIC_LONG_TUBE_NPIXELS,
BS_ELASTIC_LONG_TUBE_LENGTH, "pixel-bs-elastic-long-tube",
neutronic=True, neutronicIsPhysical=True)
det.addComment("BACKSCATTERING SHORT TUBE")
det.addPixelatedTube("tube-short-bs-elastic", BS_ELASTIC_SHORT_TUBE_NPIXELS,
BS_ELASTIC_SHORT_TUBE_LENGTH, "pixel-bs-elastic-short-tube",
neutronic=True, neutronicIsPhysical=True)
det.addComment("ELASTIC TUBE (90 degrees)")
det.addPixelatedTube("tube-elastic", ELASTIC_TUBE_NPIXELS,
ELASTIC_TUBE_LENGTH, "pixel-elastic-tube", neutronic=True, neutronicIsPhysical=True)
# PIXELS
det.addComment("PIXEL FOR INELASTIC TUBES")
det.addCylinderPixel("pixel-inelastic-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(INELASTIC_TUBE_WIDTH/2.0),
(INELASTIC_TUBE_LENGTH/INELASTIC_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (LONG)")
det.addCylinderPixel("pixel-bs-elastic-long-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_LONG_TUBE_WIDTH/2.0),
(BS_ELASTIC_LONG_TUBE_LENGTH/BS_ELASTIC_LONG_TUBE_NPIXELS))
det.addComment("PIXEL FOR BACKSCATTERING ELASTIC TUBES (SHORT)")
det.addCylinderPixel("pixel-bs-elastic-short-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(BS_ELASTIC_SHORT_TUBE_WIDTH/2.0),
(BS_ELASTIC_SHORT_TUBE_LENGTH/BS_ELASTIC_SHORT_TUBE_NPIXELS))
det.addComment("PIXEL FOR ELASTIC TUBES (90 degrees)")
det.addCylinderPixel("pixel-elastic-tube", (0.0, 0.0, 0.0), (0.0, 1.0, 0.0),
(ELASTIC_TUBE_WIDTH/2.0),
(ELASTIC_TUBE_LENGTH/ELASTIC_TUBE_NPIXELS))
det.addComment(" ##### MONITORS ##### ")
det.addMonitors(names=["monitor1"], distance=["-6.71625"], neutronic=True)
# MONITORS
det.addComment("MONITOR SHAPE")
det.addComment("FIXME: Do something real here.")
det.addDummyMonitor(0.01, 0.03)
det.addComment("MONITOR IDs")
det.addMonitorIds(["-1"])
det.showGeom()
det.writeGeom(xml_outfile)