def _set_xmode(exec_mode=None):
'Save programmer for typing exe= in every call'
global glob_exe
if exec_mode != None:
ivlad.chk_par_in_list(exec_mode, ['x', 'g', 'p', 'l'])
glob_exe = exec_mode
def _set_xmode(exec_mode=None):
'Save programmer for typing exe= in every call'
global glob_exe
if exec_mode != None:
ivlad.chk_par_in_list(exec_mode,['x','g','p','l'])
glob_exe = exec_mode
def main(par):
inp = par.string('inp') # input file
out = par.string('out') # output file
verb = par.bool('verb', False) # if y, print system commands, outputs
ivlad.chk_file_dims(inp, 2)
n1 = ivlad.getout('sfget',['parform=n','n1'], inp, verb)
n2 = ivlad.getout('sfget',['parform=n','n2'], inp, verb)
n1 = int(n1)
n2 = int(n2)
h = par.int('h', 768) # output height
w = par.int('w', 1024) # output width
has_h = par.string('h')
has_w = par.string('w')
if has_h and has_w: # both w and h were read. Check for sanity:
ivlad.chk_param_limit(w, 'w')
ivlad.chk_param_limit(h, 'h')
if (h,w) == (n1,n2):
ivlad.msg('Change h or w if you want out != inp')
sf.cp(inp, out, verb)
return ivlad.unix_success
# Transform h and w to pixels, if they are not
# No default value for par.string -- Quirk of rsf, replicated in rsfbak
unit = par.string('unit', 'px') # unit of h and w. Can be: px, mm, cm, in
ivlad.chk_par_in_list(unit,['mm','cm','in','px'])
if unit != 'px':
ppi = par.int('ppi') # outp. resolution (px/in). Necessary when unit!=px
ivlad.chk_param_limit(ppi, 'ppi')
# Transform w and h to px
if unit == 'in':
scale = 1
elif unit == 'mm':
scale = 254
elif unit == 'cm':
scale = 25.4
w *= ppi / float(scale)
h *= ppi / float(scale)
# Don't worry, we'll convert to int after prar block
del scale
# Now h and w are in pixels
# If prar=y, then h and/or w define a bounding box.
# Find the dimensions of the image inside this box
prar = par.bool('prar', True) # if y, PReserve Aspect Ratio of input
if prar: # preserve aspect ratio
if has_h and not has_w:
w = n2 * float(h) / n1
elif has_w and not has_h:
h = n1 * float(w) / n2
else: # Full bounding box specified
hscale = float(h) / n1
wscale = float(w) / n2
if hscale < wscale:
w = n2 * hscale
else:
h = n1 * wscale
h = int(h)
w = int(w)
assert h > 1
assert w > 1
h = ivlad.valswitch(h, n1, None)
w = ivlad.valswitch(w, n2, None)
tmp = tempfile.mktemp(dir=rsf.path.datapath())
# Interpolation and, if needed, bandpass
if h != None:
d1 = ivlad.getout('sfget', ['parform=n','d1'], inp, verb)
d1 = float(d1) * (n1-1)/float(h-1)
if h < n1:
ready_for_remap_1 = tmp + '1'
sf.bandpass(inp, ready_for_remap_1, fhi=0.5/d1, verb=verb)
rem2del_junk1 = True
else:
ready_for_remap_1 = inp
rem2del_junk1 = False
if w:
out_remap1 = tmp + '2'
rem2del_junk2 = True
else:
out_remap1 = out
rem2del_junk2 = False
sf.remap1(ready_for_remap_1, out_remap1, n1=h, d1=d1, verb=verb)
if rem2del_junk1:
sf.rm(ready_for_remap_1, verb)
else: # no action on axis 1
out_remap1 = inp
rem2del_junk2 = False
if w != None:
d2 = ivlad.getout('sfget', ['parform=n','d2'], inp, verb)
d2 = float(d2) * (n2-1)/float(w-1)
out_transp1 = tmp + '3'
sf.transp(out_remap1, out_transp1, verb=verb)
if rem2del_junk2:
sf.rm(out_remap1, verb)
if w < n2:
ready_for_remap_2 = tmp + '4'
sf.bandpass(out_transp1, ready_for_remap_2, fhi=0.5/d2, verb=verb)
rem2del_junk4 = True
else:
ready_for_remap_2 = out_transp1
rem2del_junk4 = False
ready_for_transp2 = tmp + '5'
sf.remap1(ready_for_remap_2,ready_for_transp2,n1=w,d1=d2,verb=verb)
sf.rm(out_transp1, verb)
if rem2del_junk4:
sf.rm(ready_for_remap_2, verb)
sf.transp(ready_for_transp2, out, verb=verb)
sf.rm(ready_for_transp2, verb)
return ivlad.unix_success
def main(par):
inp = par.string('inp') # input file
out = par.string('out') # output file
verb = par.bool('verb', False) # if y, print system commands, outputs
ivlad.chk_file_dims(inp, 2)
n1 = ivlad.getout('sfget', ['parform=n', 'n1'], inp, verb)
n2 = ivlad.getout('sfget', ['parform=n', 'n2'], inp, verb)
n1 = int(n1)
n2 = int(n2)
h = par.int('h', 768) # output height
w = par.int('w', 1024) # output width
has_h = par.string('h')
has_w = par.string('w')
if has_h and has_w: # both w and h were read. Check for sanity:
ivlad.chk_param_limit(w, 'w')
ivlad.chk_param_limit(h, 'h')
if (h, w) == (n1, n2):
ivlad.msg('Change h or w if you want out != inp')
sf.cp(inp, out, verb)
return ivlad.unix_success
# Transform h and w to pixels, if they are not
# No default value for par.string -- Quirk of rsf, replicated in rsfbak
unit = par.string('unit', 'px') # unit of h and w. Can be: px, mm, cm, in
ivlad.chk_par_in_list(unit, ['mm', 'cm', 'in', 'px'])
if unit != 'px':
ppi = par.int(
'ppi') # outp. resolution (px/in). Necessary when unit!=px
ivlad.chk_param_limit(ppi, 'ppi')
# Transform w and h to px
if unit == 'in':
scale = 1
elif unit == 'mm':
scale = 254
elif unit == 'cm':
scale = 25.4
w *= ppi / float(scale)
h *= ppi / float(scale)
# Don't worry, we'll convert to int after prar block
del scale
# Now h and w are in pixels
# If prar=y, then h and/or w define a bounding box.
# Find the dimensions of the image inside this box
prar = par.bool('prar', True) # if y, PReserve Aspect Ratio of input
if prar: # preserve aspect ratio
if has_h and not has_w:
w = n2 * float(h) / n1
elif has_w and not has_h:
h = n1 * float(w) / n2
else: # Full bounding box specified
hscale = float(h) / n1
wscale = float(w) / n2
if hscale < wscale:
w = n2 * hscale
else:
h = n1 * wscale
h = int(h)
w = int(w)
assert h > 1
assert w > 1
h = ivlad.valswitch(h, n1, None)
w = ivlad.valswitch(w, n2, None)
tmp = tempfile.mktemp(dir=rsf.path.datapath())
# Interpolation and, if needed, bandpass
if h != None:
d1 = ivlad.getout('sfget', ['parform=n', 'd1'], inp, verb)
d1 = float(d1) * (n1 - 1) / float(h - 1)
if h < n1:
ready_for_remap_1 = tmp + '1'
sf.bandpass(inp, ready_for_remap_1, fhi=0.5 / d1, verb=verb)
rem2del_junk1 = True
else:
ready_for_remap_1 = inp
rem2del_junk1 = False
if w:
out_remap1 = tmp + '2'
rem2del_junk2 = True
else:
out_remap1 = out
rem2del_junk2 = False
sf.remap1(ready_for_remap_1, out_remap1, n1=h, d1=d1, verb=verb)
if rem2del_junk1:
sf.rm(ready_for_remap_1, verb)
else: # no action on axis 1
out_remap1 = inp
rem2del_junk2 = False
if w != None:
d2 = ivlad.getout('sfget', ['parform=n', 'd2'], inp, verb)
d2 = float(d2) * (n2 - 1) / float(w - 1)
out_transp1 = tmp + '3'
sf.transp(out_remap1, out_transp1, verb=verb)
if rem2del_junk2:
sf.rm(out_remap1, verb)
if w < n2:
ready_for_remap_2 = tmp + '4'
sf.bandpass(out_transp1,
ready_for_remap_2,
fhi=0.5 / d2,
verb=verb)
rem2del_junk4 = True
else:
ready_for_remap_2 = out_transp1
rem2del_junk4 = False
ready_for_transp2 = tmp + '5'
sf.remap1(ready_for_remap_2, ready_for_transp2, n1=w, d1=d2, verb=verb)
sf.rm(out_transp1, verb)
if rem2del_junk4:
sf.rm(ready_for_remap_2, verb)
sf.transp(ready_for_transp2, out, verb=verb)
sf.rm(ready_for_transp2, verb)
return ivlad.unix_success
def __x(exe, g_exe):
if exe == None:
return g_exe
else:
ivlad.chk_par_in_list(exe, ['x', 'g', 'p', 'l'])
return exe
def __x(exe, g_exe):
if exe == None:
return g_exe
else:
ivlad.chk_par_in_list(exe, ['x','g','p','l'])
return exe
def main(par):
# Input parameters
delim = par.string('delimiter',',') # Separator between values in input file
numtype = par.string('dtype', 'float') # Input type
ivlad.chk_par_in_list(numtype, ooio.dtype_avl)
# Process parameters
verb = par.bool('verb', False) # Whether to echo n1, n2, infill/truncation
debug = par.bool('debug', False) # Extra verbosity for debugging
truncate = par.bool('trunc', False)
# Truncate or add zeros if nr elems in rows differs
header = par.bool('header',False) # If the first line is a header
# Output parameters
o = [
par.float('o1', 0.), # Origin of axis 1 in output (rows in input)
par.float('o2', 0.)] # Origin of axis 2 in output (columns in input)
d = [
par.float('d1', 1.), # Axis 1 sampling
par.float('d2', 1.)] # Axis 2 sampling
unit = [
par.string('unit1', 'unknown'),
par.string('unit2', 'unknown')]
lbl = [
par.string('label1', 'unknown'),
par.string('label2', 'unknown')]
##### End reading parameters #####
stdin = csv.reader(sys.stdin, delimiter=delim)
# Copy stdin so we can go back through it
lines = []
i = 0
nr_cols_cst = True # Whether the nr of values in rows is constant
if header: # the first line contains header keys
line = stdin.next()
k = 0
for name in line:
k += 1
print('key%d=%s' % (k,name))
# Find max nr of elements in a row
for line in stdin:
if line == []: # throw away blank lines
continue
curline = [float(x) for x in [x or '0' for x in line]]
if numtype == 'int':
curline = [int(x) for x in curline]
lines.append(curline)
llen = len(curline)
i+=1 # We have successfully read line i
if i==1:
n2 = llen
elif llen != n2:
nr_cols_cst = False
if (llen < n2 and truncate) or (llen > n2 and not truncate):
n2 = llen
n1 = len(lines)
if not nr_cols_cst: # Truncate or append as necessary
for i in range(n1):
line = lines[i]
lines[i] = ivlad.trunc_or_append(n2, line, 0, verb)
# Avoiding to add a second dimension of length 1
if n1 == 1:
ndim_out = 1
n = [n2]
o = [o[0]]
d = [d[0]]
unit = [unit[0]]
lbl = [lbl[0]]
else:
ndim_out = 2
n = [n2, n1]
out = ooio.RSFfile(ooio.stdout,par,ndim=ndim_out,intent='out',dtype=numtype)
out.set_hdr_info(n, o, d, unit, lbl)
if debug:
out.print_self('out')
out.hdr.print_self('out.hdr')
out.dat.print_self('out.dat')
ivlad.msg(ivlad.hr)
for line in lines:
for val in line:
out.write(val)
return ivlad.unix_success
def main(par):
# Input parameters
delim = par.string('delimiter',',') # Separator between values in input file
numtype = par.string('dtype', 'float') # Input type
ivlad.chk_par_in_list(numtype, ooio.dtype_avl)
# Process parameters
verb = par.bool('verb', False) # Whether to echo n1, n2, infill/truncation
debug = par.bool('debug', False) # Extra verbosity for debugging
truncate = par.bool('trunc', False)
# Truncate or add zeros if nr elems in rows differs
header = par.bool('header',False) # If the first line is a header
# Output parameters
o = [
par.float('o1', 0.), # Origin of axis 1 in output (rows in input)
par.float('o2', 0.)] # Origin of axis 2 in output (columns in input)
d = [
par.float('d1', 1.), # Axis 1 sampling
par.float('d2', 1.)] # Axis 2 sampling
unit = [
par.string('unit1', 'unknown'),
par.string('unit2', 'unknown')]
lbl = [
par.string('label1', 'unknown'),
par.string('label2', 'unknown')]
##### End reading parameters #####
stdin = csv.reader(sys.stdin, delimiter=delim)
# Copy stdin so we can go back through it
lines = []
i = 0
nr_cols_cst = True # Whether the nr of values in rows is constant
if header: # the first line contains header keys
line = stdin.next()
k = 0
for name in line:
k += 1
print 'key%d=%s' % (k,name)
# Find max nr of elements in a row
for line in stdin:
if line == []: # throw away blank lines
continue
curline = [float(x) for x in map(lambda x: x or '0', line)]
if numtype == 'int':
curline = [int(x) for x in curline]
lines.append(curline)
llen = len(curline)
i+=1 # We have successfully read line i
if i==1:
n2 = llen
elif llen != n2:
nr_cols_cst = False
if (llen < n2 and truncate) or (llen > n2 and not truncate):
n2 = llen
n1 = len(lines)
if not nr_cols_cst: # Truncate or append as necessary
for i in range(n1):
line = lines[i]
lines[i] = ivlad.trunc_or_append(n2, line, 0, verb)
# Avoiding to add a second dimension of length 1
if n1 == 1:
ndim_out = 1
n = [n2]
o = [o[0]]
d = [d[0]]
unit = [unit[0]]
lbl = [lbl[0]]
else:
ndim_out = 2
n = [n2, n1]
out = ooio.RSFfile(ooio.stdout,par,ndim=ndim_out,intent='out',dtype=numtype)
out.set_hdr_info(n, o, d, unit, lbl)
if debug:
out.print_self('out')
out.hdr.print_self('out.hdr')
out.dat.print_self('out.dat')
ivlad.msg(ivlad.hr)
for line in lines:
for val in line:
out.write(val)
return ivlad.unix_success