def find_contact_height(sim: mj.MjSim, iterations: int = 10) -> float:
""" Find the height we should put our walker at so we are just barely in contact with the ground.
Runs a binary search on height (assumed to be state[1][2]) such that the body with the minimum z coordinate
on the ground is just barely in contact with the ground.
Args:
sim: the instantiated sim MjSim object you want to find the correct height for
iterations: number of times to run_util the binary search
Returns:
just the height as a float, you'll need to set it yourself
"""
state = sim.get_state()
height_guess = state[1][1]
step = height_guess * 2 # upper range for how much we will search for
for _ in range(iterations):
if sim.data.ncon: # ncon is the number of collisions
height_guess += step
else:
height_guess -= step
state[1][1] = height_guess
sim.set_state(state)
sim.forward()
step /= 2
return height_guess
def play(self, mocap_filepath):
from mujoco_py import load_model_from_xml, MjSim, MjViewer
curr_path = getcwd()
xmlpath = '/mujoco/humanoid_deepmimic/envs/asset/dp_env_v2.xml'
with open(curr_path + xmlpath) as fin:
MODEL_XML = fin.read()
model = load_model_from_xml(MODEL_XML)
sim = MjSim(model)
viewer = MjViewer(sim)
self.read_raw_data(mocap_filepath)
self.convert_raw_data()
from time import sleep
phase_offset = np.array([0.0, 0.0, 0.0])
while True:
for k in range(len(self.data)):
tmp_val = self.data_config[k]
sim_state = sim.get_state()
sim_state.qpos[:] = tmp_val[:]
sim_state.qpos[:3] += phase_offset[:]
sim.set_state(sim_state)
sim.forward()
viewer.render()
sim_state = sim.get_state()
phase_offset = sim_state.qpos[:3]
phase_offset[2] = 0
def test_tableBoundViolation():
model = load_model_from_path("robot.xml")
sim = MjSim(model)
test1 = np.array([-0.0031, -0.9718, -0.7269, -2.4357, -0.0157, 1.5763, 0.7303]) #False
test2 = np.array([0.0264, -0.0772, 0.1924, -2.8478, -0.0273, 2.8339, 0.7566]) #True
test3 = np.array([-1.4870, -1.7289, 1.6138, -1.9814, -0.9856, 1.9304, 0.9981]) #True
test4 = np.array([-0.5250, -0.6410, 0.1893, -1.3827, -0.2573, 2.1356, 0.7116]) #False
test5 = np.array([-0.0133, 0.9846, 0.0365, -1.5491, 2.8629, 0.7630, 0.6254]) #True
qd = np.zeros(7)
state = MjSimState(time=0,qpos=test1,qvel=qd,act=None,udd_state={})
sim.set_state(state)
sim.step()
print("Test1:", "Passed" if not bounds.tableBoundViolation(sim) else "Failed")
state = MjSimState(time=0,qpos=test2,qvel=qd,act=None,udd_state={})
sim.set_state(state)
sim.step()
print("Test2:", "Passed" if bounds.tableBoundViolation(sim) else "Failed")
state = MjSimState(time=0,qpos=test3,qvel=qd,act=None,udd_state={})
sim.set_state(state)
sim.step()
print("Test3:", "Passed" if bounds.tableBoundViolation(sim) else "Failed")
state = MjSimState(time=0,qpos=test4,qvel=qd,act=None,udd_state={})
sim.set_state(state)
sim.step()
print("Test4:", "Passed" if not bounds.tableBoundViolation(sim) else "Failed")
state = MjSimState(time=0,qpos=test5,qvel=qd,act=None,udd_state={})
sim.set_state(state)
sim.step()
print("Test5:", "Passed" if bounds.tableBoundViolation(sim) else "Failed")
def run_activations_fcn(est_activations,
model_ver=0,
timestep=0.005,
Mj_render=False):
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the q0 is now the chasis pos. needs to be fixed
"""
this function runs the predicted activations generatred from running
the inverse map on the desired task kinematics
"""
#loading data
#print("loading data")
#task_kinematics=np.load("task_kinematics.npy")
#est_task_activations=np.load("est_task_activations.npy")
model = load_model_from_path(
"./models/nmi_leg_w_chassis_v{}.xml".format(model_ver))
sim = MjSim(model)
if Mj_render:
viewer = MjViewer(sim)
# viewer.cam.fixedcamid += 1
# viewer.cam.type = const.CAMERA_FIXED
sim_state = sim.get_state()
control_vector_length = sim.data.ctrl.__len__()
print("control_vector_length: " + str(control_vector_length))
number_of_task_samples = est_activations.shape[0]
real_attempt_positions = np.zeros((number_of_task_samples, 2))
real_attempt_activations = np.zeros((number_of_task_samples, 3))
chassis_pos = np.zeros(number_of_task_samples, )
sim.set_state(sim_state)
for ii in range(number_of_task_samples):
sim.data.ctrl[:] = est_activations[ii, :]
sim.step()
current_positions_array = sim.data.qpos[-2:]
# current_kinematics_array=np.array(
# [sim.data.qpos[0],
# sim.data.qvel[0],
# sim.data.qacc[0],
# sim.data.qpos[1],
# sim.data.qvel[1],
# sim.data.qacc[1]]
# )
chassis_pos[ii] = sim.data.get_geom_xpos("Chassis_frame")[0]
real_attempt_positions[ii, :] = current_positions_array
real_attempt_activations[ii, :] = sim.data.ctrl
if Mj_render:
viewer.render()
real_attempt_kinematics = positions_to_kinematics_fcn(
real_attempt_positions[:, 0],
real_attempt_positions[:, 1],
timestep=0.005)
return real_attempt_kinematics, real_attempt_activations, chassis_pos
def run_activations_fcn(MuJoCo_model_name, est_activations, timestep=0.01, Mj_render=False):
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the q0 is now the chasis pos. needs to be fixed
"""
this function runs the predicted activations generatred from running
the inverse map on the desired task kinematics
"""
#loading data
#print("loading data")
#task_kinematics=np.load("task_kinematics.npy")
#est_task_activations=np.load("est_task_activations.npy")
MuJoCo_model = load_model_from_path("./models/"+MuJoCo_model_name)
sim = MjSim(MuJoCo_model)
if Mj_render:
viewer = MjViewer(sim)
# to move it to the mounted camera
viewer.cam.fixedcamid += 1
viewer.cam.type = const.CAMERA_FIXED
# # to record the video
# viewer._record_video = True
# # recording path
# viewer._video_path = "~/Documents/"+str(time.localtime()[3])+str(time.localtime()[4])+str(time.localtime()[5])
sim_state = sim.get_state()
control_vector_length=sim.data.ctrl.__len__()
#print("control_vector_length: "+str(control_vector_length))
number_of_task_samples=est_activations.shape[0]
real_attempt_positions = np.zeros((number_of_task_samples,2))
real_attempt_activations = np.zeros((number_of_task_samples,3))
chassis_pos=np.zeros(number_of_task_samples,)
sim.set_state(sim_state)
for ii in range(number_of_task_samples):
sim.data.ctrl[:] = est_activations[ii,:]
sim.step()
current_positions_array = sim.data.qpos[-2:]
# current_kinematics_array=np.array(
# [sim.data.qpos[0],
# sim.data.qvel[0],
# sim.data.qacc[0],
# sim.data.qpos[1],
# sim.data.qvel[1],
# sim.data.qacc[1]]
# )
chassis_pos[ii]=sim.data.get_geom_xpos("Chassis_frame")[0]
real_attempt_positions[ii,:] = current_positions_array
real_attempt_activations[ii,:] = sim.data.ctrl
if Mj_render:
viewer.render()
real_attempt_kinematics = positions_to_kinematics_fcn(
real_attempt_positions[:,0], real_attempt_positions[:,1], timestep = 0.01)
return real_attempt_kinematics, real_attempt_activations, chassis_pos
def test_dampingControl():
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
timestep = generatePatternedTrajectories.TIMESTEP
control_freq = 1/timestep
total_time = 2
num_cycles = int(total_time * control_freq)
plt.ion()
LW = 1.0
fig = plt.figure(figsize=(4,15))
axes = []
lines = []
goals = []
for i in range(7):
axes.append(fig.add_subplot(7,1,i+1))
lines.append(axes[i].plot([],[],'b-', lw=LW)[0])
goals.append(axes[i].plot([],[],'r-', lw=LW)[0])
axes[i].set_ylim([-1, 1])
axes[i].set_xlim([0,total_time])
axes[i].set_ylabel("Angle{}(rad)".format(i), fontsize=8)
axes[i].set_xlabel("Time(s)", fontsize=8)
for test in range(5):
q_init = bounds.getRandPosInBounds()
qd_goal = np.zeros(7)
qd_init = np.random.rand(7)
for g in range(7):
goals[g].set_ydata(np.ones(num_cycles) * qd_goal[g])
goals[g].set_xdata(np.linspace(0,3,num_cycles))
sim.set_state(MjSimState(time=0,qpos=q_init,qvel=qd_init,act=None,udd_state={}))
sim.step()
sim_time = 0
for i in range(num_cycles):
state = sim.get_state()
q = state[1]
qd = state[2]
sim.data.ctrl[:] = controllers.dampingControl(qd=qd)
sim.step()
viewer.render()
if i % 35 == 0:
for a in range(7):
lines[a].set_xdata(np.append(lines[a].get_xdata(), sim_time))
lines[a].set_ydata(np.append(lines[a].get_ydata(), qd[a]))
fig.canvas.draw()
fig.canvas.flush_events()
sim_time += timestep
if bounds.outOfBounds(q):
break
for i in range(7):
lines[i].set_xdata([])
lines[i].set_ydata([])
time.sleep(1)
class MyEnv(gym.Env):
metadata = {'render.modes': ['human']}
def __init__(self):
self.model = load_model_from_path("xmls/Tesrt.xml")
self.sim = MjSim(self.model)
self.viewer = None
self.sim_state = self.sim.get_state()
self.bodynames = [
'torso1', 'head', 'uwaist', 'lwaist', 'butt',
'right_thigh1', 'right_shin1', 'right_foot_cap1', 'right_foot_cap2', 'left_thigh1',
'left_shin1', 'left_foot_cap1', 'left_foot_cap2', 'right_uarm1', 'right_larm',
'right_hand', 'left_uarm1', 'left_larm', 'left_hand'
]
ones_act = np.ones(len(self.sim.data.ctrl))
ones_obs = np.ones(self._get_state().shape[0])
self.action_space = spaces.Box(-ones_act, ones_act)
self.observation_space = spaces.Box(-ones_obs, ones_obs)
def _get_state(self):
torso = []
ret = []
for i in range(len(self.bodynames)):
vec = self.sim.data.get_geom_xpos(self.bodynames[i])
if i==0:
ret = vec
torso = vec
if i!=0:
ret = np.append(ret, vec-torso)
return ret
def _get_reward(self):
return self.sim.data.get_geom_xpos('head')[2]
def _step(self, action):
for i in range(len(action)):
self.sim.data.ctrl[i] = action[i] * 0.5
self.sim.step()
self.sim.step()
return self._get_state(),self._get_reward(),False,{}
def _reset(self):
self.sim.set_state(self.sim_state)
return self._get_state()
def _render(self, mode = 'human', close = False):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
self.viewer.render()
def test_cycle_through_orientations():
panda_kinematics = ikpy_panda_kinematics.panda_kinematics()
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
x_target, y_target, z_target = 0.2, 0.0, 0.5
step1 = np.linspace(0,np.pi/2, 100)
step2 = np.linspace(np.pi/2, -np.pi/2, 200)
step3 = np.linspace(-np.pi/2, 0, 100)
sweep = np.concatenate((step1, step2, step3))
roll = 0
pitch = 0
yaw = np.pi
ee_goal = [x_target, y_target, z_target, roll, pitch, yaw]
qinit = panda_kinematics.inverse_kinematics(translation=ee_goal[0:3], rpy=ee_goal[3:6])
sim.set_state(MjSimState(time=0,qpos=qinit,qvel=np.zeros(7),act=None,udd_state={}))
sim.step()
qgoal = qinit
q = qinit
qd = np.zeros(7)
count = -1
num_steps_per_change = 4
for i in range(num_steps_per_change * 400):
if i % num_steps_per_change == 0:
count += 1
ee_goal = [x_target, y_target, z_target, roll, pitch, sweep[count] + yaw]
qgoal = panda_kinematics.inverse_kinematics(translation=ee_goal[0:3], rpy=ee_goal[3:6], init_qpos=q)
R1 = panda_kinematics.euler_angles_to_rpy_rotation_matrix(rpy=[roll, pitch, sweep[count] + yaw])
R2 = panda_kinematics.euler_angles_to_rpy_rotation_matrix(panda_kinematics.forward_kinematics(qgoal)[3:6])
# R3 = sim.data.body_xmat[sim.model.body_name2id("right_hand")].reshape(3, 3)
print("R1:\n", R1)
print("R2:\n", R2)
# print("R3:\n", R3)
print("EE:", np.around(ee_goal, 3))
print("q: ", np.around(qgoal, 3))
state = sim.get_state()
q = state[1]
qd = state[2]
sim.data.ctrl[:] = controllers.PDControl(q=q,qd=qd,qgoal=qgoal)
sim.step()
viewer.render()
time.sleep(1)
def solve_disc_value_iteration(self, model: MjSim, cost_func):
[row, col] = np.shape(states)
for iter in range(6):
print(f"iteration: {iter}")
for s_1 in range(col):
for s_2 in range(col):
for ctrl in range(self._ctrls.shape[0]):
# reinitialise the state
model.set_state(
State(time=0,
qpos=np.array([states[0][s_1]]),
qvel=np.array([states[1][s_2]]),
act=0,
udd_state={}))
model.data.ctrl[0] = self._ctrls[ctrl]
value_curr = cost_func(
np.append(model.data.xipos[1], model.data.qvel[0]),
model.data.ctrl)
model.step()
# solve for the instantaneous cost and interpolate the value at the next state
if (self._states[0][0] < model.data.qpos[0] < self._states[0][-1]) and \
self._states[1][0] < model.data.qvel[0] < self._states[1][-1]:
value_curr += interpolate.griddata(
np.array([self.P.ravel(),
self.V.ravel()]).T,
self._values.ravel(),
np.array(
[model.data.qpos[0],
model.data.qvel[0]]).T)
else:
rbf_net = interpolate.Rbf(self.P.ravel(),
self.V.ravel(),
self._values.ravel(),
function="linear")
value_curr += rbf_net(model.data.qpos[0],
model.data.qvel[0])
# Hacky fix for the first iteration of vi
if ctrl == 0 and iter == 0:
self._values[s_1][s_2] = value_curr
if value_curr < self._values[s_1][s_2]:
# print(f"Difference = {value_curr - self._values[s_1][s_2]} index {s_1}{s_2}")
self._values[s_1][s_2] = value_curr
return self._values
class Mujoco_Renderer():
def __init__(self, mujoco_xml, hp):
from mujoco_py import load_model_from_path, MjSim
mujoco_xml = '/'.join(str.split(gcp.__file__, '/')[:-1]) + '/' + mujoco_xml
self.sim = MjSim(load_model_from_path(mujoco_xml))
self._hp = hp
def render(self, qpos):
sim_state = self.sim.get_state()
sim_state.qpos[:2] = qpos
sim_state.qvel[:] = np.zeros_like(self.sim.data.qvel)
self.sim.set_state(sim_state)
self.sim.forward()
subgoal_image = self.sim.render(self._hp.mpar.img_sz, self._hp.mpar.img_sz, camera_name='maincam')
# plt.imshow(subgoal_image)
# plt.savefig('test.png')
return subgoal_image
def __init__(self, model: MujocoModel, fileName):
self.FileName = fileName
self.Model = model
self.Config = TaskConfig(fileName)
sim = MjSim(self.Model.MujocoModel)
self.StartState = self.MakeState(sim, self.Config.StartConfig)
self.EndState = self.MakeState(sim, self.Config.EndConfig)
self.TargetPos = {}
self.TargetAngle = {}
joints = self.Model.JointList
sim.set_state(self.EndState)
sim.step()
for joint in joints:
self.TargetPos[joint.Site] = np.array(
sim.data.get_site_xpos(joint.Site))
self.TargetAngle[joint.Site] = np.array(
self.MatToAngle(sim.data.get_site_xmat(joint.Site)))
class MujocoSimulation(Simulation):
def __init__(self, name, total_time=1000, recording_time=[0, 1000]):
super(MujocoSimulation, self).__init__(name,
total_time=total_time,
recording_time=recording_time)
self.model = load_model_from_path('mujoco_xmls/' + name + '.xml')
self.sim = MjSim(self.model)
self.initial_state = self.sim.get_state()
self.input_size = len(self.sim.data.ctrl)
self.reset()
self.viewer = None
def reset(self):
super(MujocoSimulation, self).reset()
self.sim.set_state(self.initial_state)
def run(self, reset=True):
if reset:
self.reset()
self.sim.set_state(self.initial_state)
for i in range(self.total_time):
self.sim.data.ctrl[:] = self.ctrl_array[i]
self.sim.step()
self.trajectory.append(self.sim.get_state())
self.alreadyRun = True
def get_trajectory(self, all_info=True):
if not self.alreadyRun:
self.run()
if all_info:
return self.trajectory.copy()
else:
return [x.qpos for x in self.trajectory]
def get_recording(self, all_info=True):
traj = self.get_trajectory(all_info=all_info)
return traj[self.recording_time[0]:self.recording_time[1]]
def watch(self, repeat_count=4):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
for _ in range(repeat_count):
self.sim.set_state(self.initial_state)
for i in range(self.total_time):
self.sim.data.ctrl[:] = self.ctrl_array[i]
self.sim.step()
self.viewer.render()
self.run(
reset=False
) # so that the trajectory will be compatible with what user watches
class BaseMujocoHexRobot(HexRobot):
"""The hexapod robot in mujoco. Child classes need to define the joint names."""
@classmethod
@abc.abstractproperty
def joint_names(cls) -> Tuple[str, ...]:
"""The names of the joints in the mujoco xml."""
raise NotImplementedError
def __init__(self, load_path: str, viewer: bool = True):
"""Initialize a hex robot in mujoco.
Parameters
---------
load_path : str
Path to the xml file.
viewer : bool
Flag to create a MjViewer for the robot. By default a viewer will be created.
"""
model = load_model_from_path(load_path)
self._sim = MjSim(model)
self.num_joints = len(self.joint_names)
self._joint_qpos_ids = [
self._sim.model.get_joint_qpos_addr(x) for x in self.joint_names
]
self._joint_qvel_ids = [
self._sim.model.get_joint_qvel_addr(x) for x in self.joint_names
]
self._joint_actuator_id_map = dict(
zip(self.joint_names, range(self.num_joints)))
if viewer:
self._viewer = MjViewer(self._sim)
else:
self._viewer = None
def get_state(self) -> HexState:
"""Retrieve the current state of the robot.
Returns
-------
HexState
The current state of the robot.
"""
sim_state = self._sim.get_state()
joint_pos = sim_state.qpos[self._joint_qpos_ids]
joint_vel = sim_state.qvel[self._joint_qvel_ids]
return HexState(
qpos=OrderedDict(zip(self.joint_names, joint_pos)),
qvel=OrderedDict(zip(self.joint_names, joint_vel)),
acceleration=np.zeros(3),
) # TODO get the acceleration.
def set_joint_positions(self, joints: Dict[str, float]) -> None:
"""Sets the joint positions to the specified values
Parameters
----------
joints : Dict[str, float]
A mapping between the joint name and its value to be set.
"""
sim_state = self._sim.get_state()
for name, value in joints.items():
joint_id = self._sim.model.get_joint_qpos_addr(name)
sim_state.qpos[joint_id] = value
self._sim.set_state(sim_state)
self._sim.forward()
def step(self) -> None:
"""Steps the simulation forward by one step.
Updates the visualizer if one is available.
"""
self._sim.step()
if self._viewer is not None:
self._viewer.render()
def set_command(self, command: Dict[str, float]) -> None:
"""Set the command of the robot.
Parameters
----------
command : Dict[str, float]
The commands to the robot.
"""
for name, value in command.items():
self._sim.data.ctrl[self._joint_actuator_id_map[name]] = value
class MujocoEnv(gym.Env):
def __init__(self,
model_path,
frame_skip=1,
action_noise=0.0,
random_init_state=True):
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.viewer = None
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
self.init_qacc = self.data.qacc.ravel().copy()
self.init_ctrl = self.data.ctrl.ravel().copy()
self.qpos_dim = self.init_qpos.size
self.qvel_dim = self.init_qvel.size
self.ctrl_dim = self.init_ctrl.size
self.action_noise = action_noise
self.random_init_state = random_init_state
"""
if "init_qpos" in self.model.numeric_names:
init_qpos_id = self.model.numeric_names.index("init_qpos")
addr = self.model.numeric_adr.flat[init_qpos_id]
size = self.model.numeric_size.flat[init_qpos_id]
init_qpos = self.model.numeric_data.flat[addr:addr + size]
self.init_qpos = init_qpos
"""
self.dcom = None
self.current_com = None
self.reset()
super(MujocoEnv, self).__init__()
@property
def action_space(self):
bounds = self.model.actuator_ctrlrange.copy()
lb = bounds[:, 0]
ub = bounds[:, 1]
return spaces.Box(lb, ub)
@property
def observation_space(self):
shp = self.get_current_obs().shape
ub = BIG * np.ones(shp)
return spaces.Box(ub * -1, ub)
@property
def action_bounds(self):
return self.action_space.low, self.action_space.high
def reset_mujoco(self, init_state=None):
if init_state is None:
if self.random_init_state:
qp = self.init_qpos.copy() + \
np.random.normal(size=self.init_qpos.shape) * 0.01
qv = self.init_qvel.copy() + \
np.random.normal(size=self.init_qvel.shape) * 0.1
else:
qp = self.init_qpos.copy()
qv = self.init_qvel.copy()
qacc = self.init_qacc.copy()
ctrl = self.init_ctrl.copy()
else:
pass
"""
start = 0
for datum_name in ["qpos", "qvel", "qacc", "ctrl"]:
datum = getattr(self.data, datum_name)
datum_dim = datum.shape[0]
datum = init_state[start: start + datum_dim]
setattr(self.model.data, datum_name, datum)
start += datum_dim
"""
self.set_state(qp, qv)
def reset(self, init_state=None):
# self.reset_mujoco(init_state)
self.sim.reset()
self.sim.forward()
self.current_com = self.data.subtree_com[0]
self.dcom = np.zeros_like(self.current_com)
return self.get_current_obs()
def set_state(self, qpos, qvel, qacc):
assert qpos.shape == (self.qpos_dim, ) and qvel.shape == (
self.qvel_dim, ) and qacc.shape == (self.qacc_dim, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
def get_current_obs(self):
return self._get_full_obs()
def _get_full_obs(self):
data = self.data
cdists = np.copy(self.model.geom_margin).flat
for c in self.model.data.contact:
cdists[c.geom2] = min(cdists[c.geom2], c.dist)
obs = np.concatenate([
data.qpos.flat,
data.qvel.flat,
# data.cdof.flat,
data.cinert.flat,
data.cvel.flat,
# data.cacc.flat,
data.qfrc_actuator.flat,
data.cfrc_ext.flat,
data.qfrc_constraint.flat,
cdists,
# data.qfrc_bias.flat,
# data.qfrc_passive.flat,
self.dcom.flat,
])
return obs
@property
def _state(self):
return np.concatenate([self.data.qpos.flat, self.data.qvel.flat])
@property
def _full_state(self):
return np.concatenate([
self.data.qpos,
self.data.qvel,
self.data.qacc,
self.data.ctrl,
]).ravel()
def inject_action_noise(self, action):
# generate action noise
noise = self.action_noise * \
np.random.normal(size=action.shape)
# rescale the noise to make it proportional to the action bounds
lb, ub = self.action_bounds
noise = 0.5 * (ub - lb) * noise
return action + noise
def forward_dynamics(self, action):
ctrl = self.inject_action_noise(action)
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(self.frame_skip):
self.sim.step()
new_com = self.data.subtree_com[0]
self.dcom = new_com - self.current_com
self.current_com = new_com
def get_viewer(self, config=None):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
# self.viewer.start()
# self.viewer.set_model(self.model)
if config is not None:
pass
# self.viewer.set_window_pose(config["xpos"], config["ypos"])
# self.viewer.set_window_size(config["width"], config["height"])
# self.viewer.set_window_title(config["title"])
return self.viewer
def render(self, close=False, mode='human', config=None):
if mode == 'human':
# viewer = self.get_viewer(config=config)
try:
self.viewer.render()
except:
self.get_viewer(config=config)
self.viewer.render()
elif mode == 'rgb_array':
viewer = self.get_viewer(config=config)
viewer.loop_once()
# self.get_viewer(config=config).render()
data, width, height = self.get_viewer(config=config).get_image()
return np.fromstring(data,
dtype='uint8').reshape(height, width,
3)[::-1, :, :]
if close:
self.stop_viewer()
# def start_viewer(self):
# viewer = self.get_viewer()
# if not viewer.running:
# viewer.start()
#
# def stop_viewer(self):
# if self.viewer:
# self.viewer.finish()
# self.viewer = None
# def release(self):
# # temporarily alleviate the issue (but still some leak)
# from learning_to_adapt.mujoco_py.mjlib import mjlib
# mjlib.mj_deleteModel(self.model._wrapped)
# mjlib.mj_deleteData(self.data._wrapped)
def get_body_xmat(self, body_name):
idx = self.model.body_names.index(body_name)
return self.data.ximat[idx].reshape((3, 3))
def get_body_com(self, body_name):
return self.data.get_body_xpos(body_name)
def get_body_comvel(self, body_name):
idx = self.model.body_names.index(body_name)
## _compute_subtree
body_vels = np.zeros((self.model.nbody, 6))
# bodywise quantities
mass = self.model.body_mass.flatten()
for i in range(self.model.nbody):
# body velocity
# Compute object 6D velocity in object-centered frame, world/local orientation.
# mj_objectVelocity(const mjModel* m, const mjData* d, int objtype, int objid, mjtMum* res, int flg_local)
mujoco_py.cymj._mj_objectVelocity(self.model, self.data, 1, i,
body_vels[i], 0)
lin_moms = body_vels[:, 3:] * mass.reshape((-1, 1))
# init subtree mass
body_parentid = self.model.body_parentid
# subtree com and com_vel
for i in range(self.model.nbody - 1, -1, -1):
if i > 0:
parent = body_parentid[i]
# add scaled velocities
lin_moms[parent] += lin_moms[i]
# accumulate mass
mass[parent] += mass[i]
return_ = lin_moms / mass.reshape((-1, 1))
return return_[idx]
# return self.model.body_comvels[idx]
# def get_body_comvel(self, body_name):
# idx = self.model.body_names.index(body_name)
#
# return self.model.body_comvels[idx]
# def print_stats(self):
# super(MujocoEnv, self).print_stats()
# print("qpos dim:\t%d" % len(self.data.qpos))
def action_from_key(self, key):
raise NotImplementedError
# def set_state_tmp(self, state, restore=True):
# if restore:
# prev_pos = self.data.qpos
# prev_qvel = self.data.qvel
# prev_ctrl = self.data.ctrl
# prev_act = self.data.act
# qpos, qvel = self.decode_state(state)
# self.model.data.qpos = qpos
# self.model.data.qvel = qvel
# self.model.forward()
# yield
# if restore:
# self.data.qpos = prev_pos
# self.data.qvel = prev_qvel
# self.data.ctrl = prev_ctrl
# self.data.act = prev_act
# self.model.forward()
def get_param_values(self):
return {}
def set_param_values(self, values):
pass
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self, model_path, frame_skip=1, xml_string=""):
"""
@param model_path path of the default model
@param xml_string if given, the model will be reset using these values
"""
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.model = load_model_from_path(fullpath)
with open(fullpath, 'r') as f:
self.model_xml = f.read()
self.default_xml = self.model_xml
if xml_string != "":
self.model = load_model_from_xml(xml_string)
self.model_xml = xml_string
self.frame_skip = frame_skip
self.sim = MjSim(self.model)
self.data = self.sim.data
self.viewer = None
self._viewers = {}
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self.step(np.zeros(self.model.nu))
assert not done
self.obs_dim = np.sum([
o.size for o in observation
]) if type(observation) is tuple else observation.size
high = np.inf * np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
self.set_param_space()
def get_params(self):
"""
Returns a dict of (param_name, param_value)
"""
return MujocoUpdater(self.model_xml).get_params()
def set_params(self, params):
"""
@param params: dict(param_name, param_value)
param_name should be a string of bodyname__type__paramname
where type is either geom or joint,
e.g. thigh__joint__friction,
and param_value is a numpy array
"""
# invalidate cached properties
self.__dict__.pop('action_space', None)
self.__dict__.pop('observation_space', None)
new_xml = MujocoUpdater.set_params(self.model_xml, params)
self.__init__(xml_string=new_xml)
self.reset()
return self
def set_param_space(self, param_space=None, eps_scale=0.5, replace=True):
"""
Set param_space
@param param_space: dict(string, gym.space.base.Space)
@param eps_scale: scale of variation applied to all params
@param replace: if true, param_space overwrites default param_space.
Default behavior is to merge.
"""
if param_space is not None:
if replace:
self._param_space = param_space
else:
self._param_space = {**self._param_space, **param_space}
else:
params = MujocoUpdater(self.model_xml).get_params()
self._param_space = dict()
for param, value in params.items():
eps = np.abs(value) * eps_scale
ub = value + eps
lb = value - eps
for name in positive_params:
if name in param:
lb = np.clip(lb, 1e-3, ub)
break
space = spaces.Box(lb, ub)
self._param_space[param] = space
def get_geom_params(self, body_name):
geom = MujocoUpdater(self.model_xml).get_geom(body_name)
return {
k: v
for k, v in geom.attrib.items()
if k not in MujocoUpdater.ignore_params
}
def get_joint_params(self, body_name):
joint = MujocoUpdater(self.model_xml).get_joint(body_name)
return {
k: v
for k, v in joint.attrib.items()
if k not in MujocoUpdater.ignore_params
}
def get_body_names(self):
return MujocoUpdater(self.model_xml).get_body_names()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
def get_current_obs(self):
return self._get_full_obs()
def _get_full_obs(self):
data = self.sim.data
cdists = np.copy(self.model.geom_margin).flat
for c in self.sim.data.contact:
cdists[c.geom2] = min(cdists[c.geom2], c.dist)
obs = np.concatenate([
data.qpos.flat,
data.qvel.flat,
# data.cdof.flat,
data.cinert.flat,
data.cvel.flat,
# data.cacc.flat,
data.qfrc_actuator.flat,
data.cfrc_ext.flat,
data.qfrc_constraint.flat,
cdists,
# data.qfrc_bias.flat,
# data.qfrc_passive.flat,
self.dcom.flat,
])
return obs
@property
def _state(self):
return np.concatenate(
[self.sim.data.qpos.flat, self.sim.data.qvel.flat])
@property
def _full_state(self):
return np.concatenate([
self.sim.data.qpos,
self.sim.data.qvel,
self.sim.data.qacc,
self.sim.data.ctrl,
]).ravel()
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def viewer_setup(self):
"""
Does not work. Use mj_viewer_setup() instead
"""
pass
# -----------------------------
def reset(self, randomize=True):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob
# Added for bayesian_rl
def get_sim_state(self):
return self.sim.get_state()
# Added for bayesian_rl
def set_sim_state(self, state):
self.sim.set_state(state)
# Added for bayesian_rl
def set_state_vector(self, state_vector):
qpos = state_vector[:self.model.nq]
qvel = state_vector[self.model.nq:]
self.set_state(qpos, qvel)
# Added for bayesian_rl
def get_state_vector(self):
return self.state_vector()
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq, ) and qvel.shape == (
self.model.nv, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 1.0
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self, mode):
self.viewer = self._viewers.get(mode)
if self.viewer is None:
if mode == 'human':
self.viewer = mujoco_py.MjViewer(self.sim)
elif mode == 'rgb_array' or mode == 'depth_array':
self.viewer = mujoco_py.MjRenderContextOffscreen(self.sim, -1)
self.viewer_setup()
self._viewers[mode] = self.viewer
return self.viewer
def close(self):
if self.viewer is not None:
# self.viewer.finish()
self.viewer = None
self._viewers = {}
# def step(self, a):
# return self._step(a)
# Added for bayesian_rl
def take_action(self, a):
self.step(a)
return self.get_sim_state()
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t + 1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration',
save_loc='/tmp/',
filename='newvid',
camera_name=None):
import skvideo.io
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['mean']
o, r, d, _ = self.step(a)
t = t + 1
curr_frame = self.sim.render(width=640,
height=480,
mode='offscreen',
camera_name=camera_name,
device_id=0)
arrs.append(curr_frame[::-1, :, :])
print(t, end=', ', flush=True)
file_name = save_loc + filename + '_' + str(ep) + ".mp4"
skvideo.io.vwrite(file_name, np.asarray(arrs))
print("saved", file_name)
t1 = timer.time()
print("time taken = %f" % (t1 - t0))
def render(self, mode='human', width=DEFAULT_SIZE, height=DEFAULT_SIZE):
if mode == 'rgb_array':
self._get_viewer(mode).render(width, height)
# window size used for old mujoco-py:
data = self._get_viewer(mode).read_pixels(width,
height,
depth=False)
# original image is upside-down, so flip it
return data[::-1, :, :]
elif mode == 'depth_array':
self._get_viewer(mode).render(width, height)
# window size used for old mujoco-py:
# Extract depth part of the read_pixels() tuple
data = self._get_viewer(mode).read_pixels(width,
height,
depth=True)[1]
# original image is upside-down, so flip it
return data[::-1, :]
elif mode == 'human':
self._get_viewer(mode).render()
class DeterministicGraspPolicy(Policy):
def __init__(self, agentparams, policyparams):
Policy.__init__(self)
self.agentparams = agentparams
self.min_lift = agentparams.get('min_z_lift', 0.05)
self.policyparams = policyparams
self.adim = agentparams['adim']
self.n_actions = policyparams['nactions']
if 'num_samples' in self.policyparams:
self.M = self.policyparams['num_samples']
else:
self.M = 20 # number of CEM Samples
if 'best_to_take' in self.policyparams:
self.K = self.policyparams['best_to_take']
else:
self.K = 5 # best samples to average for next sampling
assert self.adim >= 4, 'must have at least x, y, z + gripper actions'
self.moveto = True
self.drop = False
self.grasp = False
self.lift = False
if 'iterations' in self.policyparams:
self.niter = self.policyparams['iterations']
else:
self.niter = 10 # number of iterations
self.imgs = []
self.iter = 0
def setup_CEM_model(self, t, init_model):
if t == 0:
if 'gen_xml' in self.agentparams:
self.CEM_model = MjSim(
load_model_from_path(self.agentparams['gen_xml_fname']))
else:
self.CEM_model = MjSim(
load_model_from_path(self.agentparams['filename']))
self.initial_qpos = init_model.data.qpos.copy()
self.initial_qvel = init_model.data.qvel.copy()
self.reset_CEM_model()
def reset_CEM_model(self):
if len(self.imgs) > 0:
print('saving iter', self.iter, 'with frames:', len(self.imgs))
npy_to_gif(
self.imgs,
os.path.join(self.agentparams['record'],
'iter_{}'.format(self.iter)))
self.iter += 1
sim_state = self.CEM_model.get_state()
sim_state.qpos[:] = self.initial_qpos.copy()
sim_state.qvel[:] = self.initial_qvel.copy()
self.CEM_model.set_state(sim_state)
self.prev_target = self.CEM_model.data.qpos[:self.adim].squeeze().copy(
)
self.target = self.CEM_model.data.qpos[:self.adim].squeeze().copy()
for _ in range(5):
self.step_model(self.target)
self.imgs = []
def viewer_refresh(self):
if 'debug_viewer' in self.policyparams and self.policyparams[
'debug_viewer']:
large_img = self.CEM_model.render(
640, 480, camera_name="maincam")[::-1, :, :]
self.imgs.append(large_img)
def perform_CEM(self, targetxy):
self.reset_CEM_model()
if 'object_meshes' in self.agentparams:
targetxy = self.CEM_model.data.sensordata[:2].squeeze().copy()
print('Beginning CEM')
ang_dis_mean = self.policyparams['init_mean'].copy()
ang_dis_cov = self.policyparams['init_cov'].copy()
scores = np.zeros(self.M)
best_score, best_ang, best_xy = -1, None, None
for n in range(self.niter):
ang_disp_samps = np.random.multivariate_normal(ang_dis_mean,
ang_dis_cov,
size=self.M)
for s in range(self.M):
#print('On iter', n, 'sample', s)
self.reset_CEM_model()
move = True
drop = False
grasp = False
g_start = 0
lift = False
angle_delta = ang_disp_samps[s, 0]
targetxy_delta = targetxy + ang_disp_samps[s, 1:]
print('init iter')
print(targetxy)
print(angle_delta, targetxy_delta)
for t in range(self.n_actions):
angle_action = np.zeros(self.adim)
cur_xy = self.CEM_model.data.qpos[:2].squeeze()
if move and np.linalg.norm(
targetxy_delta - cur_xy,
2) <= self.policyparams['drop_thresh']:
move = False
drop = True
if drop and self.CEM_model.data.qpos[2] <= -0.079:
drop = False
grasp = True
g_start = t
if grasp and t - g_start > 2:
grasp = False
lift = True
if move:
angle_action[:2] = targetxy_delta
angle_action[2] = self.agentparams['ztarget']
angle_action[3] = angle_delta
angle_action[4] = -100
elif drop:
angle_action[:2] = targetxy_delta
angle_action[2] = -0.08
angle_action[3] = angle_delta
angle_action[4] = -100
elif grasp:
angle_action[:2] = targetxy_delta
angle_action[2] = -0.08
angle_action[3] = angle_delta
angle_action[4] = 21
elif lift:
angle_action[:2] = targetxy_delta
angle_action[2] = self.agentparams['ztarget']
angle_action[3] = angle_delta
angle_action[4] = 21
self.step_model(angle_action)
# print 'final z', self.CEM_model.data.qpos[8].squeeze(), 'with angle', angle_samps[s]
if 'object_meshes' in self.agentparams:
obj_z = self.CEM_model.data.sensordata[2].squeeze()
else:
obj_z = self.CEM_model.data.qpos[8].squeeze()
print('obj_z at iter', n * self.M + s, 'is', obj_z)
scores[s] = obj_z
if 'stop_iter_thresh' in self.policyparams and scores[
s] > self.policyparams['stop_iter_thresh']:
return ang_disp_samps[s, 0], ang_disp_samps[s, 1:]
# print 'score',scores[s]
best_scores = np.argsort(-scores)[:self.K]
if scores[best_scores[0]] > best_score or best_ang is None:
#print('best', scores[best_scores[0]])
best_score = scores[best_scores[0]]
best_ang = ang_disp_samps[best_scores[0], 0]
best_xy = ang_disp_samps[best_scores[0], 1:]
ang_dis_mean = np.mean(ang_disp_samps[best_scores, :], axis=0)
ang_dis_cov = np.cov(ang_disp_samps[best_scores, :].T)
return best_ang, best_xy
def step_model(self, input_actions):
pos_clip = self.agentparams['targetpos_clip']
self.prev_target = self.target.copy()
self.target = input_actions.copy()
self.target = np.clip(self.target, pos_clip[0], pos_clip[1])
for s in range(self.agentparams['substeps']):
step_action = s / float(self.agentparams['substeps']) * (
self.target - self.prev_target) + self.prev_target
self.CEM_model.data.ctrl[:] = step_action
self.CEM_model.step()
self.viewer_refresh()
#print "end", self.CEM_model.data.qpos[:4].squeeze()
def act(self,
traj,
t,
init_model=None,
goal_object_pose=None,
hyperparams=None,
goal_image=None):
"""
Scripted pick->place->wiggle trajectory. There's probably a better way to script this
but booleans will suffice for now.
"""
self.setup_CEM_model(t, init_model)
if t == 0:
self.moveto = True
self.drop = False
self.lift = False
self.grasp = False
self.second_moveto = False
self.final_drop = False
self.wiggle = False
self.switchTime = 0
print('start pose', traj.Object_pose[t, 0, :3])
self.targetxy = traj.Object_pose[t, 0, :2]
self.angle, self.disp = self.perform_CEM(self.targetxy)
print('best angle', self.angle, 'best target', self.targetxy)
self.targetxy += self.disp
traj.desig_pos = np.zeros((2, 2))
traj.desig_pos[0] = self.targetxy.copy()
if self.lift and traj.X_full[t, 2] >= self.min_lift:
self.lift = False
if traj.Object_full_pose[t, 0, 2] > -0.01: #lift occursed
self.second_moveto = True
self.targetxy = np.random.uniform(-0.2, 0.2, size=2)
print("LIFTED OBJECT!")
print('dropping at', self.targetxy)
traj.desig_pos[1] = self.targetxy.copy()
else:
self.wiggle = True
if self.grasp and self.switchTime > 0:
print('lifting at time', t, '!', 'have z', traj.X_full[t, 2])
self.grasp = False
self.lift = True
if self.drop and (traj.X_full[t, 2] <= -0.079 or self.switchTime >= 2):
print('grasping at time', t, '!', 'have z', traj.X_full[t, 2])
self.drop = False
self.grasp = True
self.switchTime = 0
if self.moveto and (np.linalg.norm(traj.X_full[t, :2] - self.targetxy,
2) <=
self.policyparams['drop_thresh']):
if self.switchTime > 0:
print('stopping moveto at time', t, '!')
print(traj.X_full[t, :2], self.targetxy)
self.moveto = False
self.drop = True
self.switchTime = 0
else:
self.switchTime += 1
if self.second_moveto and np.linalg.norm(
traj.X_full[t, :2] - self.targetxy,
2) <= self.policyparams['drop_thresh']:
self.second_moveto = False
self.final_drop = True
self.switchTime = 0
actions = np.zeros(self.adim)
if self.moveto or self.second_moveto:
delta = np.zeros(3)
delta[:2] = self.targetxy - traj.target_qpos[t, :2]
if 'xyz_std' in self.policyparams:
delta += self.policyparams['xyz_std'] * np.random.normal(
size=3)
norm = np.sqrt(np.sum(np.square(delta)))
if norm > self.policyparams['max_norm']:
delta *= self.policyparams['max_norm'] / norm
actions[:3] = traj.target_qpos[t, :3] + delta
actions[2] = self.agentparams['ztarget']
actions[3] = self.angle
if self.moveto:
actions[-1] = -1
else:
actions[-1] = 1
self.switchTime += 1
elif self.drop:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
elif self.lift:
actions[:2] = self.targetxy
actions[2] = self.agentparams['ztarget']
actions[3] = self.angle
actions[-1] = 1
elif self.grasp:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = 1
self.switchTime += 1
elif self.final_drop:
if self.switchTime > 0:
print('opening')
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
if self.switchTime > 1:
print('up')
actions[:2] = self.targetxy
actions[2] = self.agentparams['ztarget'] + np.random.uniform(
-0.03, 0.05)
actions[3] = self.angle + np.random.uniform(
-np.pi / 4., np.pi / 4.)
actions[-1] = -1
self.final_drop = False
self.wiggle = True
self.switchTime = 0
else:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
elif self.wiggle:
delta_vec = np.random.normal(size=2)
norm = np.sqrt(np.sum(np.square(delta_vec)))
if norm > self.policyparams['max_norm']:
delta_vec *= self.policyparams['max_norm'] / norm
actions[:2] = np.clip(traj.target_qpos[t, :2] + delta_vec, -0.15,
0.15)
delta_z = np.random.uniform(-0.08 - traj.target_qpos[t, 2],
0.3 - traj.target_qpos[t, 2])
actions[2] = traj.target_qpos[t, 2] + delta_z
actions[3] = traj.target_qpos[t, 3] + np.random.uniform(-0.1, 0.1)
if np.random.uniform() > 0.5:
actions[4] = -1
else:
actions[4] = 1
if 'angle_std' in self.policyparams:
actions[3] += self.policyparams['angle_std'] * np.random.normal()
return actions - traj.target_qpos[t, :] * traj.mask_rel
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': 30
}
def __init__(self, model_path, frame_skip):
print(model_path)
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets", model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = mujoco_py.load_model_from_path(fullpath)
self.timestep = self.model.opt.timestep * self.frame_skip
self.sim = MjSim(self.model)
self.data = self.sim.data
self.viewer = None
# changed a place of setting action space
# sometimes use self.action_space at first call self._step()
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
assert not done
self.obs_dim = observation.size
high = np.inf * np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def viewer_setup(self):
"""
This method is called when the viewer is initialized and after every reset
Optionally implement this method, if you need to tinker with camera position
and so forth.
"""
pass
# -----------------------------
def _reset(self):
self.sim.reset()
ob = self.reset_model()
if self.viewer is not None:
# TODO:
# self.viewer.autoscale()
self.viewer_setup()
return ob
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq,) and qvel.shape == (self.model.nv,)
sim_state = self.sim.get_state()
sim_state.qpos[:] = qpos[:]
sim_state.qvel[:] = qvel[:]
self.sim.set_state(sim_state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
assert len(ctrl) is len(self.sim.data.ctrl)
self.data.ctrl[:] = ctrl[:]
for _ in range(n_frames):
self.sim.step()
def _render(self, mode='human', close=False):
if close:
if self.viewer is not None:
self.viewer = None
return
if mode == 'rgb_array':
data = self._get_viewer()._read_pixels_as_in_window()
return data
elif mode == 'human':
self._get_viewer().render()
return
def _get_viewer(self):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
self.viewer_setup()
return self.viewer
def get_body_com(self, body_name):
return self.sim.data.get_body_xipos(body_name)
def get_body_comvel(self, body_name):
return self.sim.data.get_body_cvel(self.model.body_name2id(body_name))
def get_body_xmat(self, body_name):
return self.sim.data.get_body_xmat(body_name).reshape((3, 3))
def state_vector(self):
return np.concatenate([
self.data.qpos.flat,
self.data.qvel.flat
])
model = load_model_from_xml(MODEL_XML)
sim = MjSim(model)
viewer = MjViewer(sim)
states = [{'box:x': +0.8, 'box:y': +0.8},
{'box:x': -0.8, 'box:y': +0.8},
{'box:x': -0.8, 'box:y': -0.8},
{'box:x': +0.8, 'box:y': -0.8},
{'box:x': +0.0, 'box:y': +0.0}]
# MjModel.joint_name2id returns the index of a joint in
# MjData.qpos.
x_joint_i = sim.model.get_joint_qpos_addr("box:x")
y_joint_i = sim.model.get_joint_qpos_addr("box:y")
print_box_xpos(sim)
while True:
for state in states:
sim_state = sim.get_state()
sim_state.qpos[x_joint_i] = state["box:x"]
sim_state.qpos[y_joint_i] = state["box:y"]
sim.set_state(sim_state)
sim.forward()
print("updated state to", state)
print_box_xpos(sim)
viewer.render()
if os.getenv('TESTING') is not None:
break
class RobotSimulatorMuJoCo:
def __init__(self, config_file_name, config_folder_path=''):
# reading config file and mujoco general info
config_data = util.read_config_file(config_file_name,config_folder_path)
model_xml = config_data['MuJoCo']['model_xml']
model_xml_path = os.path.join(os.environ[util.SIM_ENV_VAR],'xml/',model_xml)
model = load_model_from_path(model_xml_path)
self.sim = MjSim(model)
self.render = config_data['MuJoCo']['render']
# create robot and environment
self.robot = Robot(config_data,self.sim.model)
self.environment = Environment(config_data,self.sim.model)
# simulator parameters
self.param = {
"mj_xml": model_xml_path,
"total_time_limit": float('Inf')
}
# initialize and update from the configuration file
self.initialize_from_config(config_data)
# initialize render
self.init_render()
def initialize_from_config(self, config_data):
# extract the init states from the configuration file and assign them to init_state
init_state = self.sim.get_state()
if not config_data.has_option('Robot','ignore_init'):
init_state = self.robot.read_init_state_from_config(init_state)
if not config_data.has_option('Environment','ignore_init'):
init_state = self.environment.read_init_state_from_config(init_state)
# set the init_state to the simulator
self.sim.set_state(init_state)
self.sim.forward()
print("Simulator init states are set.")
self.update_state()
self.robot.enable_actuator()
# update total time to stop the simulation if specified
total_time_limit = config_data.getfloat('MuJoCo', 'total_time_limit')
if (total_time_limit>0):
self.param.update({'total_time_limit': total_time_limit})
# update the experiment name and the sample ID if defined
self.param.update(record_sampling_decimation=1)
self.param.update(record_sampling_idx=1)
if (config_data.has_section('Uncertainty')):
current_sample_id = config_data['Uncertainty']['current_sample_id']
if (int(current_sample_id)>0):
self.param.update({
'experiment_name' : config_data['Uncertainty']['experiment_name'],
'current_sample_id': current_sample_id
})
if ('record_sampling_decimation' in config_data['Uncertainty']):
self.param.update(
record_sampling_decimation=int(config_data['Uncertainty']['record_sampling_decimation']))
def init_render(self):
# [optional] init render
if (self.render=="yes"):
self.viewer = MjViewer(self.sim)
print("viewer initialized")
def step(self):
self.sim.step()
if (self.render=="yes"):
self.viewer.render()
def update_state(self):
current_state = self.sim.get_state()
self.robot.get_joint(current_state)
self.environment.get_joint(current_state)
def update_robot_control(self):
ctrl_pos = self.robot.compute_control()
for i, joint_name in enumerate(ctrl_pos):
self.sim.data.ctrl[i]=ctrl_pos[i]
def record_state(self):
if (self.param['record_sampling_idx']==self.param['record_sampling_decimation']):
self.robot.record_joint()
self.environment.record_joint()
self.param.update(record_sampling_idx=1)
else:
self.param.update(record_sampling_idx=self.param['record_sampling_idx']+1)
def check_time_limit(self):
if (self.sim.data.time<self.param['total_time_limit']):
return False
else:
return True
def dump_data(self):
# this func dumps data only, because the model can be loaded using the xml of the simulation.
if ('experiment_name' in self.param.keys()):
# prepare save path
export_folder_path = os.path.join(os.environ[util.SIM_DATA_ENV_VAR],
self.param['experiment_name'],'data')
if (not os.path.isdir(export_folder_path)):
os.makedirs(export_folder_path)
# save the simulator object without the MuJoCo model
self.sim=[]
file_name = os.path.join(export_folder_path,self.param['current_sample_id']+'.joblib')
joblib.dump(self, file_name)
print(f'Simulation result saved at [{file_name}]')
class World:
# Default configuration (this should not be nested since it gets copied)
# *NOTE:* Changes to this configuration should also be reflected in `Engine` configuration
DEFAULT = {
'robot_base': 'xmls/car.xml', # Which robot XML to use as the base
'robot_xy': np.zeros(2), # Robot XY location
'robot_rot': 0, # Robot rotation about Z axis
'floor_size': [3.5, 3.5, .1], # Used for displaying the floor
# Objects -- this is processed and added by the Engine class
'objects': {}, # map from name -> object dict
# Geoms -- similar to objects, but they are immovable and fixed in the scene.
'geoms': {}, # map from name -> geom dict
# Mocaps -- mocap objects which are used to control other objects
'mocaps': {},
# Determine whether we create render contexts
'observe_vision': False,
}
def __init__(self, config={}, render_context=None, render_device_id=-1):
''' config - JSON string or dict of configuration. See self.parse() '''
self.parse(config) # Parse configuration
self.first_reset = True
self.viewer = None
self.render_context = render_context
self.render_device_id = render_device_id
self.update_viewer_sim = False
self.robot = Robot(self.robot_base)
def parse(self, config):
''' Parse a config dict - see self.DEFAULT for description '''
self.config = deepcopy(self.DEFAULT)
self.config.update(deepcopy(config))
for key, value in self.config.items():
assert key in self.DEFAULT, f'Bad key {key}'
setattr(self, key, value)
@property
def data(self):
''' Helper to get the simulation data instance '''
return self.sim.data
# TODO: remove this when mujoco-py fix is merged and a new version is pushed
# https://github.com/openai/mujoco-py/pull/354
# Then all uses of `self.world.get_sensor()` should change to `self.data.get_sensor`.
def get_sensor(self, name):
id = self.model.sensor_name2id(name)
adr = self.model.sensor_adr[id]
dim = self.model.sensor_dim[id]
return self.data.sensordata[adr:adr + dim].copy()
def build(self):
''' Build a world, including generating XML and moving objects '''
# Read in the base XML (contains robot, camera, floor, etc)
self.robot_base_path = os.path.join(BASE_DIR, self.robot_base)
with open(self.robot_base_path) as f:
self.robot_base_xml = f.read()
self.xml = xmltodict.parse(
self.robot_base_xml) # Nested OrderedDict objects
# Convenience accessor for xml dictionary
worldbody = self.xml['mujoco']['worldbody']
# Move robot position to starting position
worldbody['body']['@pos'] = convert(np.r_[self.robot_xy,
self.robot.z_height])
worldbody['body']['@quat'] = convert(rot2quat(self.robot_rot))
# We need this because xmltodict skips over single-item lists in the tree
worldbody['body'] = [worldbody['body']]
if 'geom' in worldbody:
worldbody['geom'] = [worldbody['geom']]
else:
worldbody['geom'] = []
# Add equality section if missing
if 'equality' not in self.xml['mujoco']:
self.xml['mujoco']['equality'] = OrderedDict()
equality = self.xml['mujoco']['equality']
if 'weld' not in equality:
equality['weld'] = []
# Add asset section if missing
if 'asset' not in self.xml['mujoco']:
# old default rgb1: ".4 .5 .6"
# old default rgb2: "0 0 0"
# light pink: "1 0.44 .81"
# light blue: "0.004 0.804 .996"
# light purple: ".676 .547 .996"
# med blue: "0.527 0.582 0.906"
# indigo: "0.293 0 0.508"
asset = xmltodict.parse('''
<asset>
<texture type="skybox" builtin="gradient" rgb1="0.527 0.582 0.906" rgb2="0.1 0.1 0.35"
width="800" height="800" markrgb="1 1 1" mark="random" random="0.001"/>
<texture name="texplane" builtin="checker" height="100" width="100"
rgb1="0.7 0.7 0.7" rgb2="0.8 0.8 0.8" type="2d"/>
<material name="MatPlane" reflectance="0.1" shininess="0.1" specular="0.1"
texrepeat="10 10" texture="texplane"/>
</asset>
''')
self.xml['mujoco']['asset'] = asset['asset']
# Add light to the XML dictionary
light = xmltodict.parse('''<b>
<light cutoff="100" diffuse="1 1 1" dir="0 0 -1" directional="true"
exponent="1" pos="0 0 0.5" specular="0 0 0" castshadow="false"/>
</b>''')
worldbody['light'] = light['b']['light']
# Add floor to the XML dictionary if missing
if not any(g.get('@name') == 'floor' for g in worldbody['geom']):
floor = xmltodict.parse('''
<geom name="floor" type="plane" condim="6"/>
''')
worldbody['geom'].append(floor['geom'])
# Make sure floor renders the same for every world
for g in worldbody['geom']:
if g['@name'] == 'floor':
g.update({
'@size': convert(self.floor_size),
'@rgba': '1 1 1 1',
'@material': 'MatPlane'
})
# Add cameras to the XML dictionary
cameras = xmltodict.parse('''<b>
<camera name="fixednear" pos="0 -2 2" zaxis="0 -1 1"/>
<camera name="fixedfar" pos="0 -5 5" zaxis="0 -1 1"/>
<camera name="fixedtop" pos="0 0 5" zaxis="0 0 1"/>
</b>''')
worldbody['camera'] = cameras['b']['camera']
# Build and add a tracking camera (logic needed to ensure orientation correct)
theta = self.robot_rot
xyaxes = dict(x1=np.cos(theta),
x2=-np.sin(theta),
x3=0,
y1=np.sin(theta),
y2=np.cos(theta),
y3=1)
pos = dict(xp=0 * np.cos(theta) + (-2) * np.sin(theta),
yp=0 * (-np.sin(theta)) + (-2) * np.cos(theta),
zp=2)
track_camera = xmltodict.parse('''<b>
<camera name="track" mode="track" pos="{xp} {yp} {zp}" xyaxes="{x1} {x2} {x3} {y1} {y2} {y3}"/>
</b>'''.format(**pos, **xyaxes))
# support multiple cameras on 'body'
if not isinstance(worldbody['body'][0]['camera'], list):
worldbody['body'][0]['camera'] = [worldbody['body'][0]['camera']]
worldbody['body'][0]['camera'].append(track_camera['b']['camera'])
# Add objects to the XML dictionary
for name, object in self.objects.items():
assert object['name'] == name, f'Inconsistent {name} {object}'
object = object.copy() # don't modify original object
object['quat'] = rot2quat(object['rot'])
if name == 'box':
dim = object['size'][0]
object['height'] = object['size'][-1]
object['width'] = dim / 2
object['x'] = dim
object['y'] = dim
body = xmltodict.parse(
'''
<body name="{name}" pos="{pos}" quat="{quat}">
<freejoint name="{name}"/>
<geom name="{name}" type="{type}" size="{size}" density="{density}"
rgba="{rgba}" group="{group}"/>
<geom name="col1" type="{type}" size="{width} {width} {height}" density="{density}"
rgba="{rgba}" group="{group}" pos="{x} {y} 0"/>
<geom name="col2" type="{type}" size="{width} {width} {height}" density="{density}"
rgba="{rgba}" group="{group}" pos="-{x} {y} 0"/>
<geom name="col3" type="{type}" size="{width} {width} {height}" density="{density}"
rgba="{rgba}" group="{group}" pos="{x} -{y} 0"/>
<geom name="col4" type="{type}" size="{width} {width} {height}" density="{density}"
rgba="{rgba}" group="{group}" pos="-{x} -{y} 0"/>
</body>
'''.format(**{k: convert(v)
for k, v in object.items()}))
else:
body = xmltodict.parse(
'''
<body name="{name}" pos="{pos}" quat="{quat}">
<freejoint name="{name}"/>
<geom name="{name}" type="{type}" size="{size}" density="{density}"
rgba="{rgba}" group="{group}"/>
</body>
'''.format(**{k: convert(v)
for k, v in object.items()}))
# Append new body to world, making it a list optionally
# Add the object to the world
worldbody['body'].append(body['body'])
# Add mocaps to the XML dictionary
for name, mocap in self.mocaps.items():
# Mocap names are suffixed with 'mocap'
assert mocap['name'] == name, f'Inconsistent {name} {object}'
assert name.replace(
'mocap', 'obj') in self.objects, f'missing object for {name}'
# Add the object to the world
mocap = mocap.copy() # don't modify original object
mocap['quat'] = rot2quat(mocap['rot'])
body = xmltodict.parse('''
<body name="{name}" mocap="true">
<geom name="{name}" type="{type}" size="{size}" rgba="{rgba}"
pos="{pos}" quat="{quat}" contype="0" conaffinity="0" group="{group}"/>
</body>
'''.format(**{k: convert(v)
for k, v in mocap.items()}))
worldbody['body'].append(body['body'])
# Add weld to equality list
mocap['body1'] = name
mocap['body2'] = name.replace('mocap', 'obj')
weld = xmltodict.parse('''
<weld name="{name}" body1="{body1}" body2="{body2}" solref=".02 1.5"/>
'''.format(**{k: convert(v)
for k, v in mocap.items()}))
equality['weld'].append(weld['weld'])
# Add geoms to XML dictionary
for name, geom in self.geoms.items():
assert geom['name'] == name, f'Inconsistent {name} {geom}'
geom = geom.copy() # don't modify original object
geom['quat'] = rot2quat(geom['rot'])
geom['contype'] = geom.get('contype', 1)
geom['conaffinity'] = geom.get('conaffinity', 1)
body = xmltodict.parse('''
<body name="{name}" pos="{pos}" quat="{quat}">
<geom name="{name}" type="{type}" size="{size}" rgba="{rgba}" group="{group}"
contype="{contype}" conaffinity="{conaffinity}"/>
</body>
'''.format(**{k: convert(v)
for k, v in geom.items()}))
# Append new body to world, making it a list optionally
# Add the object to the world
worldbody['body'].append(body['body'])
# Instantiate simulator
# print(xmltodict.unparse(self.xml, pretty=True))
self.xml_string = xmltodict.unparse(self.xml)
self.model = load_model_from_xml(self.xml_string)
self.sim = MjSim(self.model)
# Add render contexts to newly created sim
if self.render_context is None and self.observe_vision:
render_context = MjRenderContextOffscreen(
self.sim, device_id=self.render_device_id, quiet=True)
render_context.vopt.geomgroup[:] = 1
self.render_context = render_context
if self.render_context is not None:
self.render_context.update_sim(self.sim)
# Recompute simulation intrinsics from new position
self.sim.forward()
def rebuild(self, config={}, state=True):
''' Build a new sim from a model if the model changed '''
if state:
old_state = self.sim.get_state()
#self.config.update(deepcopy(config))
#self.parse(self.config)
self.parse(config)
self.build()
if state:
self.sim.set_state(old_state)
self.sim.forward()
def reset(self, build=True):
''' Reset the world (sim is accessed through self.sim) '''
if build:
self.build()
# set flag so that renderer knows to update sim
self.update_viewer_sim = True
def render(self, mode='human'):
''' Render the environment to the screen '''
if self.viewer is None:
self.viewer = MjViewer(self.sim)
# Turn all the geom groups on
self.viewer.vopt.geomgroup[:] = 1
# Set camera if specified
if mode == 'human':
self.viewer.cam.fixedcamid = -1
self.viewer.cam.type = const.CAMERA_FREE
else:
self.viewer.cam.fixedcamid = self.model.camera_name2id(mode)
self.viewer.cam.type = const.CAMERA_FIXED
if self.update_viewer_sim:
self.viewer.update_sim(self.sim)
self.update_viewer_sim = False
self.viewer.render()
def robot_com(self):
''' Get the position of the robot center of mass in the simulator world reference frame '''
return self.body_com('robot')
def robot_pos(self):
''' Get the position of the robot in the simulator world reference frame '''
return self.body_pos('robot')
def robot_mat(self):
''' Get the rotation matrix of the robot in the simulator world reference frame '''
return self.body_mat('robot')
def robot_vel(self):
''' Get the velocity of the robot in the simulator world reference frame '''
return self.body_vel('robot')
def body_com(self, name):
''' Get the center of mass of a named body in the simulator world reference frame '''
return self.data.subtree_com[self.model.body_name2id(name)].copy()
def body_pos(self, name):
''' Get the position of a named body in the simulator world reference frame '''
return self.data.get_body_xpos(name).copy()
def body_mat(self, name):
''' Get the rotation matrix of a named body in the simulator world reference frame '''
return self.data.get_body_xmat(name).copy()
def body_vel(self, name):
''' Get the velocity of a named body in the simulator world reference frame '''
return self.data.get_body_xvelp(name).copy()
model = load_model_from_xml(MODEL_LEG_XML)
sim = MjSim(model)
viewer = MjViewer(sim)
qpos = np.zeros(2)
qvel = np.zeros(2)
old_state = sim.get_state()
angHip = 120.0 / 180 * np.pi
angKne = (180.0 - 40.0) / 180 * np.pi
qpos[0] = angHip # hip joint initial angle
qpos[1] = np.pi - angKne # knee joint initial angle
qvel[0] = 0.0 # hip joint initial velocity
qvel[1] = 0.0 # knee joint initial velocity
new_state = mujoco_py.MjSimState(old_state.time, qpos, qvel,
old_state.act, old_state.udd_state)
sim.set_state(new_state)
sim.forward()
# viewer.render()
# create muscle
timestep = 5e-4
# Series elastic element (SE) force-length relationship
eref = 0.04 # [lslack] tendon reference strain
# excitation-contraction coupling
preAct = 0.01 # [] preactivation
tau = 0.01 # [s] delay time constant
# contractile element (CE) force-length relationship
w = 0.56 # [lopt] width
c = 0.05 # []; remaining force at +/- width
# CE force-velocity relationship
class Environment():
def __init__(self,
model_name,
goal_space_train,
goal_space_test,
project_state_to_end_goal,
end_goal_thresholds,
initial_state_space,
subgoal_bounds,
project_state_to_subgoal,
subgoal_thresholds,
max_actions=1200,
num_frames_skip=10,
show=False):
self.name = model_name
# Create Mujoco Simulation
self.model = load_model_from_path("./mujoco_files/" + model_name)
self.sim = MjSim(self.model)
# Set dimensions and ranges of states, actions, and goals in order to configure actor/critic networks
if model_name == "pendulum.xml":
self.state_dim = 2 * len(self.sim.data.qpos) + len(
self.sim.data.qvel)
else:
self.state_dim = len(self.sim.data.qpos) + len(
self.sim.data.qvel
) # State will include (i) joint angles and (ii) joint velocities
self.action_dim = len(
self.sim.model.actuator_ctrlrange) # low-level action dim
self.action_bounds = self.sim.model.actuator_ctrlrange[:,
1] # low-level action bounds
self.action_offset = np.zeros((len(
self.action_bounds))) # Assumes symmetric low-level action ranges
self.end_goal_dim = len(goal_space_test)
self.subgoal_dim = len(subgoal_bounds)
self.subgoal_bounds = subgoal_bounds
# Projection functions
self.project_state_to_end_goal = project_state_to_end_goal
self.project_state_to_subgoal = project_state_to_subgoal
# Convert subgoal bounds to symmetric bounds and offset. Need these to properly configure subgoal actor networks
self.subgoal_bounds_symmetric = np.zeros((len(self.subgoal_bounds)))
self.subgoal_bounds_offset = np.zeros((len(self.subgoal_bounds)))
for i in range(len(self.subgoal_bounds)):
self.subgoal_bounds_symmetric[i] = (self.subgoal_bounds[i][1] -
self.subgoal_bounds[i][0]) / 2
self.subgoal_bounds_offset[i] = self.subgoal_bounds[i][
1] - self.subgoal_bounds_symmetric[i]
# End goal/subgoal thresholds
self.end_goal_thresholds = end_goal_thresholds
self.subgoal_thresholds = subgoal_thresholds
# Set inital state and goal state spaces
self.initial_state_space = initial_state_space
self.goal_space_train = goal_space_train
self.goal_space_test = goal_space_test
self.subgoal_colors = [
"Magenta", "Green", "Red", "Blue", "Cyan", "Orange", "Maroon",
"Gray", "White", "Black"
]
self.max_actions = max_actions
# Implement visualization if necessary
self.visualize = show # Visualization boolean
if self.visualize:
self.viewer = MjViewer(self.sim)
self.num_frames_skip = num_frames_skip
# The following variables are hardcoded for the tower building env:
self.n_objects = 1 # try out 2-3 later
self.min_tower_height = 1 # try out 2 later
self.max_tower_height = 4 # try out 2-3 later
self.initial_state = copy.deepcopy(self.sim.get_state())
self.block_gripper = False
self.n_substeps = 20
self.gripper_extra_height = 0.0
self.target_in_the_air = True # maybe make dynamic?
self.target_offset = 0.0
self.obj_range = 0.15
self.target_range = 0.15
self.distance_threshold = 0.05
self.initial_qpos = {
'robot0:slide0': 0.0,
'robot0:slide1': 0.0,
'robot0:slide2': 0.0,
'object0:joint': [0.1, 0.0, 0.05, 1., 0., 0., 0.],
'object1:joint': [0.2, 0.0, 0.05, 1., 0., 0., 0.],
'object2:joint': [0.3, 0.0, 0.05, 1., 0., 0., 0.],
'object3:joint': [0.4, 0.0, 0.05, 1., 0., 0., 0.],
'object4:joint': [0.5, 0.0, 0.05, 1., 0., 0., 0.],
}
self.reward_type = 'sparse'
self.gripper_goal = 'gripper_none' # can be 'gripper_none', 'gripper_random' and 'gripper_above'
self.goal_size = (self.n_objects * 3)
if self.gripper_goal != 'gripper_none':
self.goal_size += 3
gripperSkipIdx = 0 if self.gripper_goal == "gripper_none" else 3
objectIdx = gripperSkipIdx + self.n_objects * 3
self.table_height = 0.5
self.obj_height = 0.05
if self.name == "assets/fetch/build_tower.xml":
self._env_setup(self.initial_qpos)
self.state_dim = self._get_obs_len()
self.action_dim = 4
#self.action_bounds = np.array([[-1, 1], [-1, 1], [-1, 1], [-1, 1]])#self.sim.model.actuator_ctrlrange[:, 1]
self.action_bounds = np.ones((self.action_dim))
self.action_offset = np.zeros(
(self.action_dim)) # Assumes symmetric low-level action ranges
self.end_goal_dim = self.goal_size
self.project_state_to_end_goal = self._obs2goal_tower
self.end_goal_thresholds = [0.05 for i in range(self.goal_size)]
self.use_full_state_space_as_subgoal_space = True
if not self.use_full_state_space_as_subgoal_space:
self.subgoal_dim = self.goal_size
self.project_state_to_subgoal = self._obs2goal_tower
self.subgoal_bounds_offset = np.concatenate(
[[1, 0.25, 0.55] for i in range(self.subgoal_dim // 3)])
self.subgoal_bounds_symmetric = np.ones((self.subgoal_dim))
self.subgoal_bounds = [([self.table_height, 1.5] if
(i + 1) % 3 == 0 else [0, 1.5])
for i in range(self.subgoal_dim)]
else:
#self.subgoal_dim = self.state_dim
self.subgoal_dim = 3 + self.n_objects * 3
self.project_state_to_subgoal = self._obs2goal_subgoal
self.subgoal_bounds = [[0, 1.5]
for _ in range(self.subgoal_dim)]
#self.subgoal_bounds_offset = np.zeros((self.subgoal_dim))
#objects_offset = np.concatenate([[1, 0.25, 0.55] for i in range(self.n_objects)])
#self.subgoal_bounds_offset = np.zeros(self.subgoal_dim)
#self.subgoal_bounds_offset[3:3+3*self.n_objects] = objects_offset
#self.subgoal_bounds_offset = np.concatenate([[1, 0.25, 0.55] if gripperSkipIdx <= i <= objectIdx
# else [0, 0, 0] for i in range(0, self.subgoal_dim, 3)])
#self.subgoal_bounds_symmetric = np.ones((self.subgoal_dim)) * 2
#self.subgoal_bounds = [([self.table_height, 1.5] if (i+1) % 3 == 0 else [0, 1.5]) if
# 3 <= i < 3+3*self.n_objects else [-7, 7] for i in range(self.subgoal_dim)]
# in ur5 subgoal bound: np.array([[-2 * np.pi, 2 * np.pi], [-2 * np.pi, 2 * np.pi], [-2 * np.pi, 2 * np.pi], [-4, 4], [-4, 4], [-4, 4]])
# Try the following, borrowed from original code
self.subgoal_bounds_symmetric = np.zeros(
(len(self.subgoal_bounds)))
self.subgoal_bounds_offset = np.zeros((len(self.subgoal_bounds)))
for i in range(len(self.subgoal_bounds)):
self.subgoal_bounds_symmetric[i] = (
self.subgoal_bounds[i][1] - self.subgoal_bounds[i][0]) / 2
self.subgoal_bounds_offset[i] = self.subgoal_bounds[i][
1] - self.subgoal_bounds_symmetric[i]
print("Subgoal offset:", self.subgoal_bounds_offset)
print("Subgoal bounds:", self.subgoal_bounds)
#pos_threshold = 0.05
#angle_threshold = np.deg2rad(10)
#velo_threshold = 2
#objects_threshold = np.concatenate([[pos_threshold for _ in range(3)] for _ in range(self.n_objects * 2)])
#objects_rotation = np.concatenate([[angle_threshold for _ in range(3)] for _ in range(self.n_objects)])
#objects_velo_pos = np.concatenate([[velo_threshold for _ in range(3)] for _ in range(self.n_objects)])
#self.subgoal_thresholds = np.concatenate((np.array([pos_threshold for i in range(3)]), objects_threshold,
# np.array([pos_threshold for i in range(2)]), objects_rotation,
# objects_velo_pos, objects_rotation * 4,
# np.array([velo_threshold for i in range(3)]),
# np.array([velo_threshold for i in range(2)])))
self.subgoal_thresholds = [0.05 for i in range(self.subgoal_dim)]
print("Subgoal thresholds: ", self.subgoal_thresholds)
print("Shape thresholds:", np.shape(self.subgoal_thresholds))
if __debug__:
print("Action bounds: ", self.action_bounds)
def _is_success(self, achieved_goal, desired_goal):
d = goal_distance(achieved_goal, desired_goal)
return (d < self.distance_threshold).astype(np.float32)
def get_agent_params(self, agent_params):
agent_params["subgoal_noise"] = [0.03 for i in range(self.subgoal_dim)]
return agent_params
def _obs2goal_tower(self, sim, obs):
if self.gripper_goal != 'gripper_none':
goal = obs[:self.goal_size]
else:
goal = obs[3:self.goal_size + 3]
return goal
def _obs2goal_subgoal(self, sim, obs):
#return np.concatenate((np.array([bound_angle(sim.data.qpos[i]) for i in range(len(sim.data.qpos))]),
# np.array([4 if sim.data.qvel[i] > 4 else -4 if sim.data.qvel[i] < -4 else sim.data.qvel[i] for i in
# range(len(sim.data.qvel))])))
#return obs
return obs[:3 + self.n_objects * 3]
# Get state for tower building env:
def _get_obs(self):
dt = self.sim.nsubsteps * self.sim.model.opt.timestep
# positions
grip_pos = self.sim.data.get_site_xpos('robot0:grip')
grip_velp = self.sim.data.get_site_xvelp('robot0:grip') * dt
robot_qpos, robot_qvel = self.sim.data.qpos, self.sim.data.qvel
object_pos, object_rot, object_velp, object_velr = ([]
for _ in range(4))
object_rel_pos = []
if self.n_objects > 0:
for n_o in range(self.n_objects):
oname = 'object{}'.format(n_o)
this_object_pos = self.sim.data.get_site_xpos(oname)
# rotations
this_object_rot = rotations.mat2euler(
self.sim.data.get_site_xmat(oname))
# velocities
this_object_velp = self.sim.data.get_site_xvelp(oname) * dt
this_object_velr = self.sim.data.get_site_xvelr(oname) * dt
# gripper state
this_object_rel_pos = this_object_pos - grip_pos
this_object_velp -= grip_velp
object_pos = np.concatenate([object_pos, this_object_pos])
object_rot = np.concatenate([object_rot, this_object_rot])
object_velp = np.concatenate([object_velp, this_object_velp])
object_velr = np.concatenate([object_velr, this_object_velr])
object_rel_pos = np.concatenate(
[object_rel_pos, this_object_rel_pos])
else:
object_pos = object_rot = object_velp = object_velr = object_rel_pos = np.array(
np.zeros(3))
gripper_state = robot_qpos[-2:]
gripper_vel = robot_qvel[
-2:] * dt # change to a scalar if the gripper is made symmetric
obs = np.concatenate([
grip_pos,
object_pos.ravel(),
object_rel_pos.ravel(),
gripper_state,
object_rot.ravel(),
object_velp.ravel(),
object_velr.ravel(),
grip_velp,
gripper_vel,
])
return obs
# Get state len:
def _get_obs_len(self):
dt = self.sim.nsubsteps * self.sim.model.opt.timestep
# positions
grip_pos = self.sim.data.get_site_xpos('robot0:grip')
grip_velp = self.sim.data.get_site_xvelp('robot0:grip') * dt
robot_qpos, robot_qvel = self.sim.data.qpos, self.sim.data.qvel
object_pos, object_rot, object_velp, object_velr = ([]
for _ in range(4))
object_rel_pos = []
if self.n_objects > 0:
for n_o in range(self.n_objects):
oname = 'object{}'.format(n_o)
this_object_pos = self.sim.data.get_site_xpos(oname)
# rotations
this_object_rot = rotations.mat2euler(
self.sim.data.get_site_xmat(oname))
# velocities
this_object_velp = self.sim.data.get_site_xvelp(oname) * dt
this_object_velr = self.sim.data.get_site_xvelr(oname) * dt
# gripper state
this_object_rel_pos = this_object_pos - grip_pos
this_object_velp -= grip_velp
object_pos = np.concatenate([object_pos, this_object_pos])
object_rot = np.concatenate([object_rot, this_object_rot])
object_velp = np.concatenate([object_velp, this_object_velp])
object_velr = np.concatenate([object_velr, this_object_velr])
object_rel_pos = np.concatenate(
[object_rel_pos, this_object_rel_pos])
else:
object_pos = object_rot = object_velp = object_velr = object_rel_pos = np.array(
np.zeros(3))
gripper_state = robot_qpos[-2:]
gripper_vel = robot_qvel[
-2:] * dt # change to a scalar if the gripper is made symmetric
obs = np.concatenate([
grip_pos,
object_pos.ravel(),
object_rel_pos.ravel(),
gripper_state,
object_rot.ravel(),
object_velp.ravel(),
object_velr.ravel(),
grip_velp,
gripper_vel,
])
print("obs len: ", len(obs))
return len(obs)
# Get state, which concatenates joint positions and velocities
def get_state(self):
if self.name == "pendulum.xml":
return np.concatenate([
np.cos(self.sim.data.qpos),
np.sin(self.sim.data.qpos), self.sim.data.qvel
])
elif self.name == "assets/fetch/build_tower.xml":
return self._get_obs()
else:
return np.concatenate((self.sim.data.qpos, self.sim.data.qvel))
def _env_setup(self, initial_qpos):
for name, value in initial_qpos.items():
self.sim.data.set_joint_qpos(name, value)
utils.reset_mocap_welds(self.sim)
self.sim.forward()
# Move end effector into position.
gripper_target = np.array([
-0.498, 0.005, -0.431 + self.gripper_extra_height
]) + self.sim.data.get_site_xpos('robot0:grip')
gripper_rotation = np.array([1., 0., 1., 0.])
self.sim.data.set_mocap_pos('robot0:mocap', gripper_target)
self.sim.data.set_mocap_quat('robot0:mocap', gripper_rotation)
for _ in range(10):
self.sim.step()
# Extract information for sampling goals.
self.initial_gripper_xpos = self.sim.data.get_site_xpos(
'robot0:grip').copy()
print("inital gripper xpos", self.initial_gripper_xpos)
if self.n_objects > 0:
self.height_offset = self.sim.data.get_site_xpos('object0')[2]
def _reset_sim_tower(self):
self.step_ctr = 0
self.sim.set_state(self.initial_state)
# Randomize start position of objects.
for o in range(self.n_objects):
oname = 'object{}'.format(o)
object_xpos = self.initial_gripper_xpos[:2]
close = True
while close:
# self.initial_gripper_xpos[:2]
object_xpos = [1, 0.25] + np.random.uniform(
-self.obj_range, self.obj_range, size=2)
close = False
dist_to_nearest = np.linalg.norm(object_xpos -
self.initial_gripper_xpos[:2])
# Iterate through all previously placed boxes and select closest:
for o_other in range(o):
other_xpos = self.sim.data.get_joint_qpos(
'object{}:joint'.format(o_other))[:2]
dist = np.linalg.norm(object_xpos - other_xpos)
dist_to_nearest = min(dist, dist_to_nearest)
if dist_to_nearest < 0.1:
close = True
object_qpos = self.sim.data.get_joint_qpos(
'{}:joint'.format(oname))
assert object_qpos.shape == (7, )
object_qpos[:2] = object_xpos
object_qpos[2] = self.table_height + (self.obj_height /
2) * self.obj_height * 1.05
self.sim.data.set_joint_qpos('{}:joint'.format(oname), object_qpos)
self.sim.forward()
return True
# Reset simulation to state within initial state specified by user
def reset_sim(self):
if self.name == "assets/fetch/build_tower.xml":
self._reset_sim_tower()
else:
# Reset joint positions and velocities
for i in range(len(self.sim.data.qpos)):
self.sim.data.qpos[i] = np.random.uniform(
self.initial_state_space[i][0],
self.initial_state_space[i][1])
for i in range(len(self.sim.data.qvel)):
self.sim.data.qvel[i] = np.random.uniform(
self.initial_state_space[len(self.sim.data.qpos) + i][0],
self.initial_state_space[len(self.sim.data.qpos) + i][1])
self.sim.step()
# Return state
return self.get_state()
# Set action for tower building env:
def _set_action(self, action):
assert action.shape == (4, )
action = action.copy(
) # ensure that we don't change the action outside of this scope
pos_ctrl, gripper_ctrl = action[:3], action[3]
pos_ctrl *= 0.05 # limit maximum change in position
rot_ctrl = [
1., 0., 1., 0.
] # fixed rotation of the end effector, expressed as a quaternion
gripper_ctrl = np.array([gripper_ctrl, gripper_ctrl])
assert gripper_ctrl.shape == (2, )
if self.block_gripper:
gripper_ctrl = np.zeros_like(gripper_ctrl)
action = np.concatenate([pos_ctrl, rot_ctrl, gripper_ctrl])
# Apply action to simulation.
utils.ctrl_set_action(self.sim, action)
utils.mocap_set_action(self.sim, action)
self.step_ctr += 1
# Execute low-level action for number of frames specified by num_frames_skip
def execute_action(self, action):
if __debug__:
print("action: ", action)
if self.name == "assets/fetch/build_tower.xml":
self._set_action(action)
#self.sim.data.ctrl[:] = action
else:
self.sim.data.ctrl[:] = action
for _ in range(self.num_frames_skip):
self.sim.step()
if self.visualize:
self.viewer.render()
return self.get_state()
# Visualize end goal. This function may need to be adjusted for new environments.
def display_end_goal(self, end_goal):
# Goal can be visualized by changing the location of the relevant site object.
if self.name == "pendulum.xml":
self.sim.data.mocap_pos[0] = np.array([
0.5 * np.sin(end_goal[0]), 0, 0.5 * np.cos(end_goal[0]) + 0.6
])
elif self.name == "assets/fetch/build_tower.xml":
for i in range(self.n_objects):
self.model.body_pos[-13 + i] = end_goal[i * 3:(i * 3) + 3]
elif self.name == "ur5.xml":
theta_1 = end_goal[0]
theta_2 = end_goal[1]
theta_3 = end_goal[2]
# shoulder_pos_1 = np.array([0,0,0,1])
upper_arm_pos_2 = np.array([0, 0.13585, 0, 1])
forearm_pos_3 = np.array([0.425, 0, 0, 1])
wrist_1_pos_4 = np.array([0.39225, -0.1197, 0, 1])
# Transformation matrix from shoulder to base reference frame
T_1_0 = np.array([[1, 0, 0, 0], [0, 1, 0, 0], [0, 0, 1, 0.089159],
[0, 0, 0, 1]])
# Transformation matrix from upper arm to shoulder reference frame
T_2_1 = np.array([[np.cos(theta_1), -np.sin(theta_1), 0, 0],
[np.sin(theta_1),
np.cos(theta_1), 0, 0], [0, 0, 1, 0],
[0, 0, 0, 1]])
# Transformation matrix from forearm to upper arm reference frame
T_3_2 = np.array([[np.cos(theta_2), 0,
np.sin(theta_2), 0], [0, 1, 0, 0.13585],
[-np.sin(theta_2), 0,
np.cos(theta_2), 0], [0, 0, 0, 1]])
# Transformation matrix from wrist 1 to forearm reference frame
T_4_3 = np.array([[np.cos(theta_3), 0,
np.sin(theta_3), 0.425], [0, 1, 0, 0],
[-np.sin(theta_3), 0,
np.cos(theta_3), 0], [0, 0, 0, 1]])
# Determine joint position relative to original reference frame
# shoulder_pos = T_1_0.dot(shoulder_pos_1)
upper_arm_pos = T_1_0.dot(T_2_1).dot(upper_arm_pos_2)[:3]
forearm_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(forearm_pos_3)[:3]
wrist_1_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(T_4_3).dot(
wrist_1_pos_4)[:3]
joint_pos = [upper_arm_pos, forearm_pos, wrist_1_pos]
"""
print("\nEnd Goal Joint Pos: ")
print("Upper Arm Pos: ", joint_pos[0])
print("Forearm Pos: ", joint_pos[1])
print("Wrist Pos: ", joint_pos[2])
"""
for i in range(3):
self.sim.data.mocap_pos[i] = joint_pos[i]
else:
assert False, "Provide display end goal function in environment.py file"
def _sample_goal_tower(self):
obs = self._get_obs()
target_goal = None
if obs is not None:
# I changed obs['observation'] into obs because it is just a numpy array
if self.gripper_goal != 'gripper_none':
goal = obs.copy()[:self.goal_size]
else:
goal = obs.copy()[3:(self.goal_size + 3)]
if self.gripper_goal != 'gripper_none' and self.n_objects > 0:
target_goal_start_idx = 3
else:
target_goal_start_idx = 0
stack_tower = (self.max_tower_height - self.min_tower_height +
1) == self.n_objects
if not stack_tower:
if self.n_objects > 0:
target_range = self.n_objects
else:
target_range = 1
for n_o in range(target_range):
# too_close = True
while True:
# self.initial_gripper_xpos[:3]
target_goal = [
1, 0.25, self.table_height + 0.05
] + np.random.uniform(
-self.target_range, self.target_range, size=3)
target_goal += self.target_offset
rnd_height = random.randint(self.min_tower_height,
self.max_tower_height)
self.goal_tower_height = rnd_height
target_goal[2] = self.table_height + (
rnd_height * self.obj_height) - (self.obj_height /
2)
too_close = False
for i in range(0, target_goal_start_idx, 3):
other_loc = goal[i:i + 3]
dist = np.linalg.norm(other_loc[:2] -
target_goal[:2],
axis=-1)
if dist < 0.1:
too_close = True
if too_close is False:
break
goal[target_goal_start_idx:target_goal_start_idx +
3] = target_goal.copy()
target_goal_start_idx += 3
else:
target_goal_xy = [1, 0.25] + np.random.uniform(
-self.target_range, self.target_range, size=2)
self.goal_tower_height = self.n_objects
for n_o in range(self.n_objects):
height = n_o + 1
target_z = self.table_height + (
height * self.obj_height) - (self.obj_height / 2)
target_goal = np.concatenate((target_goal_xy, [target_z]))
goal[target_goal_start_idx:target_goal_start_idx +
3] = target_goal.copy()
target_goal_start_idx += 3
# Final gripper position
if self.gripper_goal != 'gripper_none':
gripper_goal_pos = goal.copy()[-3:]
if self.gripper_goal == 'gripper_above':
gripper_goal_pos[2] += (3 * self.obj_height)
elif self.gripper_goal == 'gripper_random':
too_close = True
while too_close:
gripper_goal_pos = [1, 0.25, self.table_height + 0.05] + \
np.random.uniform(-self.target_range,
self.target_range, size=3)
# gripper_goal_pos[0] += 0.25
gripper_goal_pos[2] += 0.14
if np.linalg.norm(gripper_goal_pos - target_goal,
axis=-1) >= 0.1:
too_close = False
goal[:3] = gripper_goal_pos
return goal.copy()
else:
return []
# Function returns an end goal
def get_next_goal(self, test):
end_goal = np.zeros((len(self.goal_space_test)))
if self.name == "ur5.xml":
goal_possible = False
while not goal_possible:
end_goal = np.zeros(shape=(self.end_goal_dim, ))
end_goal[0] = np.random.uniform(self.goal_space_test[0][0],
self.goal_space_test[0][1])
end_goal[1] = np.random.uniform(self.goal_space_test[1][0],
self.goal_space_test[1][1])
end_goal[2] = np.random.uniform(self.goal_space_test[2][0],
self.goal_space_test[2][1])
# Next need to ensure chosen joint angles result in achievable task (i.e., desired end effector position is above ground)
theta_1 = end_goal[0]
theta_2 = end_goal[1]
theta_3 = end_goal[2]
# shoulder_pos_1 = np.array([0,0,0,1])
upper_arm_pos_2 = np.array([0, 0.13585, 0, 1])
forearm_pos_3 = np.array([0.425, 0, 0, 1])
wrist_1_pos_4 = np.array([0.39225, -0.1197, 0, 1])
# Transformation matrix from shoulder to base reference frame
T_1_0 = np.array([[1, 0, 0, 0], [0, 1, 0, 0],
[0, 0, 1, 0.089159], [0, 0, 0, 1]])
# Transformation matrix from upper arm to shoulder reference frame
T_2_1 = np.array([[np.cos(theta_1), -np.sin(theta_1), 0, 0],
[np.sin(theta_1),
np.cos(theta_1), 0, 0], [0, 0, 1, 0],
[0, 0, 0, 1]])
# Transformation matrix from forearm to upper arm reference frame
T_3_2 = np.array([[np.cos(theta_2), 0,
np.sin(theta_2), 0], [0, 1, 0, 0.13585],
[-np.sin(theta_2), 0,
np.cos(theta_2), 0], [0, 0, 0, 1]])
# Transformation matrix from wrist 1 to forearm reference frame
T_4_3 = np.array([[np.cos(theta_3), 0,
np.sin(theta_3), 0.425], [0, 1, 0, 0],
[-np.sin(theta_3), 0,
np.cos(theta_3), 0], [0, 0, 0, 1]])
forearm_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(
forearm_pos_3)[:3]
wrist_1_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(T_4_3).dot(
wrist_1_pos_4)[:3]
# Make sure wrist 1 pos is above ground so can actually be reached
if np.absolute(end_goal[0]) > np.pi / 4 and forearm_pos[
2] > 0.05 and wrist_1_pos[2] > 0.15:
goal_possible = True
elif self.name == "assets/fetch/build_tower.xml":
end_goal = self._sample_goal_tower()
elif not test and self.goal_space_train is not None:
for i in range(len(self.goal_space_train)):
end_goal[i] = np.random.uniform(self.goal_space_train[i][0],
self.goal_space_train[i][1])
else:
assert self.goal_space_test is not None, "Need goal space for testing. Set goal_space_test variable in \"design_env.py\" file"
for i in range(len(self.goal_space_test)):
end_goal[i] = np.random.uniform(self.goal_space_test[i][0],
self.goal_space_test[i][1])
# Visualize End Goal
self.display_end_goal(end_goal)
return end_goal
# Visualize all subgoals
def display_subgoals(self, subgoals):
# Display up to 10 subgoals and end goal
if len(subgoals) <= 11:
subgoal_ind = 0
else:
subgoal_ind = len(subgoals) - 11
for i in range(1, min(len(subgoals), 11)):
if self.name == "pendulum.xml":
self.sim.data.mocap_pos[i] = np.array([
0.5 * np.sin(subgoals[subgoal_ind][0]), 0,
0.5 * np.cos(subgoals[subgoal_ind][0]) + 0.6
])
# Visualize subgoal
self.sim.model.site_rgba[i][3] = 1
subgoal_ind += 1
elif self.name == "assets/fetch/build_tower.xml":
# display only the goal positions of the blocks
if self.use_full_state_space_as_subgoal_space:
#for n in range(self.n_objects):
# self.model.body_pos[-9 + (3 * (i-1)) + n] = self._obs2goal_tower(self.sim, subgoals[i-1])[n*3:(n*3)+3]
# Gripper pos:
self.model.body_pos[-1] = subgoals[i - 1][0:3]
# Objects pos:
for n in range(self.n_objects):
self.model.body_pos[-10 + (3 * (i - 1)) +
n] = subgoals[i -
1][3 +
n * 3:(n * 3) + 6]
else:
for n in range(self.n_objects):
self.model.body_pos[-9 + (3 * (i - 1)) +
n] = subgoals[i - 1][n *
3:(n * 3) + 3]
subgoal_ind += 1
elif self.name == "ur5.xml":
theta_1 = subgoals[subgoal_ind][0]
theta_2 = subgoals[subgoal_ind][1]
theta_3 = subgoals[subgoal_ind][2]
# shoulder_pos_1 = np.array([0,0,0,1])
upper_arm_pos_2 = np.array([0, 0.13585, 0, 1])
forearm_pos_3 = np.array([0.425, 0, 0, 1])
wrist_1_pos_4 = np.array([0.39225, -0.1197, 0, 1])
# Transformation matrix from shoulder to base reference frame
T_1_0 = np.array([[1, 0, 0, 0], [0, 1, 0, 0],
[0, 0, 1, 0.089159], [0, 0, 0, 1]])
# Transformation matrix from upper arm to shoulder reference frame
T_2_1 = np.array([[np.cos(theta_1), -np.sin(theta_1), 0, 0],
[np.sin(theta_1),
np.cos(theta_1), 0, 0], [0, 0, 1, 0],
[0, 0, 0, 1]])
# Transformation matrix from forearm to upper arm reference frame
T_3_2 = np.array([[np.cos(theta_2), 0,
np.sin(theta_2), 0], [0, 1, 0, 0.13585],
[-np.sin(theta_2), 0,
np.cos(theta_2), 0], [0, 0, 0, 1]])
# Transformation matrix from wrist 1 to forearm reference frame
T_4_3 = np.array([[np.cos(theta_3), 0,
np.sin(theta_3), 0.425], [0, 1, 0, 0],
[-np.sin(theta_3), 0,
np.cos(theta_3), 0], [0, 0, 0, 1]])
# Determine joint position relative to original reference frame
# shoulder_pos = T_1_0.dot(shoulder_pos_1)
upper_arm_pos = T_1_0.dot(T_2_1).dot(upper_arm_pos_2)[:3]
forearm_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(
forearm_pos_3)[:3]
wrist_1_pos = T_1_0.dot(T_2_1).dot(T_3_2).dot(T_4_3).dot(
wrist_1_pos_4)[:3]
joint_pos = [upper_arm_pos, forearm_pos, wrist_1_pos]
"""
print("\nSubgoal %d Joint Pos: " % i)
print("Upper Arm Pos: ", joint_pos[0])
print("Forearm Pos: ", joint_pos[1])
print("Wrist Pos: ", joint_pos[2])
"""
# Designate site position for upper arm, forearm and wrist
for j in range(3):
self.sim.data.mocap_pos[3 + 3 * (i - 1) + j] = np.copy(
joint_pos[j])
self.sim.model.site_rgba[3 + 3 * (i - 1) + j][3] = 1
# print("\nLayer %d Predicted Pos: " % i, wrist_1_pos[:3])
subgoal_ind += 1
else:
# Visualize desired gripper position, which is elements 18-21 in subgoal vector
self.sim.data.mocap_pos[i] = subgoals[subgoal_ind]
# Visualize subgoal
self.sim.model.site_rgba[i][3] = 1
subgoal_ind += 1
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self, model_path, frame_skip):
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets", model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
assert not done
self.obs_dim = np.sum([o.size for o in observation]) if type(observation) is tuple else observation.size
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
high = np.inf*np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def viewer_setup(self):
"""
Does not work. Use mj_viewer_setup() instead
"""
pass
# -----------------------------
def _reset(self):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq,) and qvel.shape == (self.model.nv,)
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 1.0
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self):
return None
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([
state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self, policy, horizon=1000, num_episodes=1, mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self, policy, horizon=1000,
num_episodes=1,
mode='exploration',
save_loc='/tmp/',
filename='newvid',
camera_name=None):
import skvideo.io
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
curr_frame = self.sim.render(width=640, height=480, mode='offscreen',
camera_name=camera_name, device_id=0)
arrs.append(curr_frame[::-1,:,:])
print(t, end=', ', flush=True)
file_name = save_loc + filename + str(ep) + ".mp4"
skvideo.io.vwrite( file_name, np.asarray(arrs))
print("saved", file_name)
t1 = timer.time()
print("time taken = %f"% (t1-t0))
def main(data_dir):
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
initial_state = MjSimState(time=0,
qpos=np.array([
0, -np.pi / 4, 0, -3 * np.pi / 4 + 1, 0,
np.pi / 2, np.pi / 4
]),
qvel=np.zeros(7),
act=None,
udd_state={})
sim.set_state(initial_state)
sim.step()
traj_count = 0
control_state = None
while (traj_count < NUM_TRAJECTORIES and control_state != FINISHED):
control_state = ACCELERATING
outputFile = None
initial_q = sim.get_state()[q_INDEX]
velGen = randVelGen.RandVelGenerator()
qd_des = velGen.generatePatternVel()
coming_back_time = 0.0
time = 0
while control_state != FINISHED:
state = sim.get_state()
q = state[q_INDEX]
qd = state[qd_INDEX]
boundViolations = bounds.getBoundViolations(q)
# RD =
TB = bounds.tableBoundViolation(sim)
OB = bounds.outOfBounds(q)
DA = helperFun.moving(qd)
DC = helperFun.stopped(qd)
DD = DC
DB = coming_back_time > RETURN_TIME
FN = traj_count >= NUM_TRAJECTORIES
prev_state = control_state
# transition block
if control_state == ACCELERATING:
if not TB and not OB and not DA:
control_state = ACCELERATING
elif TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0.0
elif not TB and OB:
control_state = DAMPING
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif not TB and not OB and DA:
control_state = COASTING
traj_count += 1
outputFile = open(data_dir +
helperFun.getUniqueFileName("traj"),
mode='x')
outputWriter = csv.writer(outputFile, delimiter=',')
print_count(traj_count)
else:
control_state = FINISHED
print("Unknown transistion! ACCELERATING")
elif control_state == COASTING:
if not FN and not TB and not OB and DC:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
outputFile.close()
elif not FN and TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0
outputFile.close()
elif not FN and not TB and OB:
control_state = DAMPING
outputFile.close()
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif FN:
control_state = FINISHED
outputFile.close()
elif not FN and not TB and not OB and not DC:
control_state = COASTING
else:
control_state = FINISHED
print("Unknown transition! COASTING")
outputFile.close()
elif control_state == DAMPING:
if not TB and not DD:
control_state = DAMPING
elif TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0.0
elif not TB and DD:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
else:
control_state = FINISHED
print("Unknow transition! DAMPING")
elif control_state == COMING_BACK_IN_BOUNDS:
if not DB:
control_state = COMING_BACK_IN_BOUNDS
elif DB and OB:
control_state = DAMPING
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif DB and not OB:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
else:
control_state = FINISHED
print("Unknown transition! COMING_BACK_IN_BOUNDS")
elif control_state == FINISHED:
control_state = FINISHED
else:
control_state = FINISHED
print("Got to an invalid state!")
# debug states
if prev_state != control_state:
if control_state == ACCELERATING:
print("ACCELERATING")
elif control_state == COASTING:
print("COASTING")
elif control_state == DAMPING:
print("DAMPING")
elif control_state == COMING_BACK_IN_BOUNDS:
print("COMING_BACK_IN_BOUNDS")
elif control_state == "FINISHED":
print("FINISHED")
else:
print("In a bad state!")
torques = np.zeros(7)
if control_state == ACCELERATING:
torques = controllers.basicVelControl(qd_des=qd_des, qd_cur=qd)
elif control_state == COASTING:
data = np.concatenate(
(q, qd, data_calc.get_3D_data(sim), [time]))
outputWriter.writerow(data)
torques = controllers.basicVelControl(qd_des=qd_des, qd_cur=qd)
elif control_state == DAMPING:
torques = controllers.dampingControl(qd)
elif control_state == COMING_BACK_IN_BOUNDS:
coming_back_time += TIMESTEP
torques = controllers.moveAwayFromTable(q=q, qd=qd)
elif control_state == FINISHED:
outputFile.close()
break
else:
print("Got to an invalid state!")
control_state = FINISHED
break
sim.data.ctrl[:] = torques
sim.step()
viewer.render()
time += TIMESTEP
def test_sim_state():
model = load_model_from_xml(BASIC_MODEL_XML)
foo = 10
d = {"foo": foo,
"foo_array": np.array([foo, foo, foo]),
"foo_2darray": np.reshape(np.array([foo, foo, foo, foo]), (2, 2)),
}
def udd_callback(sim):
return d
sim = MjSim(model, nsubsteps=2, udd_callback=udd_callback)
state = sim.get_state()
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state.udd_state.keys():
if (isinstance(state.udd_state[k], Number)):
assert state.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state.udd_state[k], sim.udd_state[k])
# test flatten, unflatten
a = state.flatten()
assert len(a) == (1 + sim.model.nq + sim.model.nv + sim.model.na + 8)
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state2.udd_state.keys():
if (isinstance(state2.udd_state[k], Number)):
assert state2.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state2.udd_state[k], sim.udd_state[k])
assert state2 == state
assert not state2 != state
# test equality with deleting keys
state2 = state2._replace(udd_state={"foo": foo})
assert state2 != state
assert not (state2 == state)
# test equality with changing contents of array
state2 = state2._replace(
udd_state={"foo": foo, "foo_array": np.array([foo, foo + 1])})
assert state2 != state
assert not (state2 == state)
# test equality with adding keys
d2 = dict(d)
d2.update({"not_foo": foo})
state2 = state2._replace(udd_state=d2)
assert state2 != state
assert not (state2 == state)
# test defensive copy
sim.set_state(state)
state.qpos[0] = -1
assert not np.array_equal(state.qpos, sim.data.qpos)
state3 = sim.get_state()
state3.qpos[0] = -1
assert not np.array_equal(state3.qpos, sim.data.qpos)
state3.udd_state["foo_array"][0] = -1
assert not np.array_equal(
state3.udd_state["foo_array"], sim.udd_state["foo_array"])
# test no callback
sim = MjSim(model, nsubsteps=2)
state = sim.get_state()
print("state.udd_state = %s" % state.udd_state)
assert state.udd_state == {}
# test flatten, unflatten
a = state.flatten()
assert len(a) == 1 + sim.model.nq + sim.model.nv + sim.model.na
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
assert state.udd_state == sim.udd_state
def test_sim_state():
model = load_model_from_xml(BASIC_MODEL_XML)
foo = 10
d = {"foo": foo,
"foo_array": np.array([foo, foo, foo]),
"foo_2darray": np.reshape(np.array([foo, foo, foo, foo]), (2, 2)),
}
def udd_callback(sim):
return d
sim = MjSim(model, nsubsteps=2, udd_callback=udd_callback)
state = sim.get_state()
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state.udd_state.keys():
if (isinstance(state.udd_state[k], Number)):
assert state.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state.udd_state[k], sim.udd_state[k])
# test flatten, unflatten
a = state.flatten()
assert len(a) == (1 + sim.model.nq + sim.model.nv + sim.model.na + 8)
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state2.udd_state.keys():
if (isinstance(state2.udd_state[k], Number)):
assert state2.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state2.udd_state[k], sim.udd_state[k])
assert state2 == state
assert not state2 != state
# test equality with deleting keys
state2 = state2._replace(udd_state={"foo": foo})
assert state2 != state
assert not (state2 == state)
# test equality with changing contents of array
state2 = state2._replace(
udd_state={"foo": foo, "foo_array": np.array([foo, foo + 1])})
assert state2 != state
assert not (state2 == state)
# test equality with adding keys
d2 = dict(d)
d2.update({"not_foo": foo})
state2 = state2._replace(udd_state=d2)
assert state2 != state
assert not (state2 == state)
# test defensive copy
sim.set_state(state)
state.qpos[0] = -1
assert not np.array_equal(state.qpos, sim.data.qpos)
state3 = sim.get_state()
state3.qpos[0] = -1
assert not np.array_equal(state3.qpos, sim.data.qpos)
state3.udd_state["foo_array"][0] = -1
assert not np.array_equal(
state3.udd_state["foo_array"], sim.udd_state["foo_array"])
# test no callback
sim = MjSim(model, nsubsteps=2)
state = sim.get_state()
print("state.udd_state = %s" % state.udd_state)
assert state.udd_state == {}
# test flatten, unflatten
a = state.flatten()
assert len(a) == 1 + sim.model.nq + sim.model.nv + sim.model.na
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
assert state.udd_state == sim.udd_state
def closeloop_run_fcn(model,
desired_kinematics,
P,
I,
delay_timesteps=0,
model_ver=0,
plot_outputs=True,
Mj_render=False,
timestep=.005):
est_activations = estimate_activations_fcn(model, desired_kinematics)
number_of_task_samples = desired_kinematics.shape[0]
chassis_pos = np.zeros(number_of_task_samples, )
input_kinematics = np.zeros(desired_kinematics.shape)
real_attempt_positions = np.zeros([number_of_task_samples, 2])
real_attempt_activations = np.zeros([number_of_task_samples, 3])
q_error_cum = np.zeros([number_of_task_samples, 2]) # sample error history
Mj_model = load_model_from_path(
"./models/nmi_leg_w_chassis_v{}.xml".format(model_ver))
sim = MjSim(Mj_model)
if Mj_render:
viewer = MjViewer(sim)
viewer.cam.fixedcamid += 1
viewer.cam.type = const.CAMERA_FIXED
sim_state = sim.get_state()
control_vector_length = sim.data.ctrl.__len__()
print("control_vector_length: " + str(control_vector_length))
sim.set_state(sim_state)
gradient_edge_order = 1
for ii in range(number_of_task_samples):
if ii < max(gradient_edge_order, delay_timesteps + 1):
#print(ii)
input_kinematics[ii, :] = desired_kinematics[ii, :]
else:
[input_kinematics[ii, :],
q_error_cum] = calculate_closeloop_inputkinematics(
step_number=ii,
real_attempt_positions=real_attempt_positions,
desired_kinematics=desired_kinematics,
q_error_cum=q_error_cum,
P=P,
I=I,
delay_timesteps=delay_timesteps,
gradient_edge_order=gradient_edge_order,
timestep=timestep)
est_activations[ii, :] = model.predict([input_kinematics[ii, :]])[0, :]
sim.data.ctrl[:] = est_activations[ii, :]
sim.step()
chassis_pos[ii] = sim.data.get_geom_xpos("Chassis_frame")[0]
current_positions_array = sim.data.qpos[-2:]
real_attempt_positions[ii, :] = current_positions_array
real_attempt_activations[ii, :] = sim.data.ctrl
if Mj_render:
viewer.render()
real_attempt_kinematics = positions_to_kinematics_fcn(
real_attempt_positions[:, 0],
real_attempt_positions[:, 1],
timestep=timestep)
error0 = error_cal_fcn(desired_kinematics[:, 0],
real_attempt_kinematics[:, 0])
error1 = error_cal_fcn(desired_kinematics[:, 3],
real_attempt_kinematics[:, 3])
average_error = 0.5 * (error0 + error1)
if plot_outputs:
#plt.figure()
alpha = .8
plot_t = np.linspace(timestep, desired_kinematics.shape[0] * timestep,
desired_kinematics.shape[0])
plt.subplot(2, 1, 1)
plt.plot(plot_t,
desired_kinematics[:, 0],
'k',
plot_t,
real_attempt_kinematics[:, 0],
'C1',
alpha=.9)
plt.ylabel("$q_1$ (rads)")
plt.subplot(2, 1, 2)
plt.plot(plot_t,
desired_kinematics[:, 3],
'k',
plot_t,
real_attempt_kinematics[:, 3],
'C1',
alpha=.9)
plt.ylabel("$q_2$ (rads)")
plt.xlabel("time (s)")
plt.show(block=True)
return average_error, real_attempt_kinematics, real_attempt_activations
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self,
env_name,
rand_seed,
maximum_length,
model_path,
frame_skip,
misc_info={}):
self._env_name = env_name
self._rand_seed = rand_seed
self._maximum_length = maximum_length
self._misc_info = misc_info
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
# Why is this here? Causes errors
#observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
#assert not done
#self.obs_dim = np.sum([o.size for o in observation]) if type(observation) is tuple else observation.size
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
# annoying should replace
high = np.inf * np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed(self._rand_seed)
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(self._rand_seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def get_env_state(self):
"""
Get full state of the environment beyond qpos and qvel
For example, if targets are defined using sites, this function should also
contain location of the sites (which are not included in qpos).
Must return a dictionary that can be used in the set_env_state function
"""
raise NotImplementedError
def set_env_state(self, state):
"""
Uses the state dictionary to set the state of the world
"""
raise NotImplementedError
# -----------------------------
def reset(self):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob, 0, False, {}
def reset_soft(self, seed=None):
return self._old_obs, 0, False, {}
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq, ) and qvel.shape == (
self.model.nv, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 0.5
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self):
return None
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t + 1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self,
policy,
horizon=1000,
num_episodes=1,
frame_size=(640, 480),
mode='exploration',
save_loc='./tmp/',
filename='newvid',
it=0,
camera_name=None):
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o, *_ = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy(o)
o, r, d, _ = self.step(a)
t = t + 1
curr_frame = self.sim.render(width=frame_size[0],
height=frame_size[1],
mode='offscreen',
camera_name=camera_name,
device_id=0)
arrs.append(curr_frame[::-1, :, :])
print(t, end=', ', flush=True)
file_name = save_loc + filename + str(ep) + str(it) + ".mp4"
if not os.path.exists(save_loc):
os.makedirs(save_loc)
imageio.mimwrite(file_name, np.asarray(arrs), fps=10.0)
print("saved", file_name)
t1 = timer.time()
print("time taken = %f" % (t1 - t0))
def initial_config_from_mjcf(file, ee_list, verbose=False):
"""
Parameters
----------
file (str):
mjcf file
ee_list (list of str):
End-effector body names
Returns
-------
ret (dict):
nq (tf.Tensor)
Number of joint
nu (tf.Tensor)
Number of input
S (tf.Tensor):
Selection Matrix. This includes actuator gear.
(1,nu, nq)
dt (tf.Tensor):
Timestep
joint_armature (tf.Tensor):
(nq,)
g (tf.Tensor): Gravity
Mlist (tf.Tensor):
Link frame i relative to p(i) at the home position
(nbody,6,6)
Slist (tf.Tensor):
Screw axes Si of the joints in a space frame.
(nq,6)
init_ee_SE3 (dict of tf.Tensor):
Initial end-effector SE3
Blist (dict of tf.Tensor):
Joint screw axes in the end-effector frame when the
manipulator is at the home position
(nq_branch,6)
Bidlist (dict of tf.Tensor):
List of the jonit index related to the end-effector branch
(nq_branch,)
init_ee_SE3 (dict of tf.Tensor):
(4,4)
Glist (tf.Tensor):
Spatial inertia matrices Gi of the links.
(nbody,6,6)
pidlist (tf.Tensor):
Parent body index.
(nbody,)
"""
ret = dict()
model = load_model_from_path(file)
sim = MjSim(model)
sim_state = sim.get_state()
for i in range(sim.model.nq):
sim_state.qpos[i] = 0.
sim_state.qvel[i] = 0.
sim.set_state(sim_state)
sim.forward()
nq, nv, nu = sim.model.nq, sim.model.nv, sim.model.nu
n_ee = len(ee_list)
njoint, nbody = sim.model.njnt, sim.model.nbody-n_ee-1
assert sim.model.nq + 1 + n_ee == sim.model.nbody
assert nq == nv
assert nq == njoint
assert nq == nbody
S = None
if nu is not 0:
S = np.zeros((1,nu,nq))
S[0,0:nu, nq-nu:nq] = np.diag(sim.model.actuator_gear[:,0])
muj_world_id = 0
muj_ee_id, muj_body_id, muj_body_name = [], [], []
muj_global_body_pos, muj_global_body_SO3 = np.zeros((sim.model.nbody, 3)), np.zeros((sim.model.nbody, 3, 3))
muj_global_joint_pos, muj_global_joint_SO3 = np.zeros((sim.model.nq, 3)), np.zeros((sim.model.nq, 3, 3))
muj_global_body_SO3[0] = np.eye(3)
muj_global_inertial_pos, muj_global_inertial_SO3 = np.zeros((sim.model.nbody, 3)), np.zeros((sim.model.nbody, 3, 3))
for i in range(sim.model.nbody):
if sim.model.body_names[i] == "world":
muj_world_id = i
elif sim.model.body_names[i] in ee_list:
muj_ee_id.append(sim.model.body_name2id(sim.model.body_names[i]))
else:
muj_body_id.append(i)
muj_body_name.append(sim.model.body_names[i])
muj_global_body_SO3[i] = sim.data.get_body_xmat(sim.model.body_names[i])
muj_global_body_pos[i] = sim.data.get_body_xpos(sim.model.body_names[i])
muj_global_inertial_pos[i] = muj_global_body_pos[i] + sim.model.body_ipos[i]
muj_global_inertial_SO3[i] = np.dot(muj_global_body_SO3[i], quat_to_SO3(sim.model.body_iquat[i]))
for i in range(sim.model.nq):
body_id = sim.model.jnt_bodyid[i]
muj_global_joint_SO3[i] = muj_global_body_SO3[body_id]
muj_global_joint_pos[i] = muj_global_body_pos[body_id] + np.dot(muj_global_body_SO3[body_id], sim.model.jnt_pos[i])
Bidlist = dict()
for ee in ee_list:
idlist_reverse = []
ee_parent = sim.model.body_parentid[sim.model.body_name2id(ee)]
while True:
j_st_id = sim.model.body_jntadr[ee_parent]
nj = sim.model.body_jntnum[ee_parent]
idlist_reverse.extend([*range(j_st_id, j_st_id+nj)][::-1])
ee_parent = sim.model.body_parentid[ee_parent]
if (sim.model.body_names[ee_parent]=='world'):
break
Bidlist[ee] = idlist_reverse[::-1]
if verbose:
print("="*80)
print("Infos aboue Mujoco Model")
print("-"*80)
print("Global Body Pos")
print(muj_global_body_pos)
print("-"*80)
print("Global Body Ori")
print(muj_global_body_SO3)
print("-"*80)
print("Global Inertia Pos")
print(muj_global_inertial_pos)
print("-"*80)
print("Global Inertia Ori")
print(muj_global_inertial_SO3)
print("-"*80)
print("Global Joint Pos")
print(muj_global_joint_pos)
print("-"*80)
print("Global Joint Ori")
print(muj_global_joint_SO3)
for ee in ee_list:
print("-"*80)
print("{} Related Joint Id".format(ee))
print(Bidlist[ee])
print("="*80)
ret['nq'] = tf.convert_to_tensor(nq, tf.int32)
ret['nu'] = tf.convert_to_tensor(nu, tf.int32)
if S is None:
ret['S'] = None
else:
ret['S'] = tf.convert_to_tensor(S, tf.float32)
ret['dt'] = tf.convert_to_tensor(sim.model.opt.timestep, tf.float32)
ret['joint_armature'] = tf.convert_to_tensor(sim.model.dof_armature, tf.float32)
ret['g'] = tf.convert_to_tensor(sim.model.opt.gravity, tf.float32)
pidlist = []
for i in range(nbody):
pname = sim.model.body_names[sim.model.body_parentid[sim.model.body_name2id(muj_body_name[i])]]
if pname == "world":
pidlist.append(-1)
else:
pidlist.append(muj_body_name.index(pname))
ret['pidlist'] = tf.convert_to_tensor(np.array(pidlist), tf.int32)
ret['Mlist'] = [None]*nbody
ret['Glist'] = [None]*nbody
for i in range(nbody):
muj_id = muj_body_id[i]
muj_pid = sim.model.body_parentid[muj_id]
rel_pos = np.dot(muj_global_inertial_SO3[muj_pid].T, muj_global_inertial_pos[muj_id] - muj_global_inertial_pos[muj_pid])
rel_SO3 = np.dot(muj_global_inertial_SO3[muj_pid].T, muj_global_inertial_SO3[muj_id])
rel_SE3 = tf.squeeze(Rp_to_SE3(tf.expand_dims(tf.convert_to_tensor(rel_SO3,tf.float32),0), tf.expand_dims(tf.convert_to_tensor(rel_pos,tf.float32),0)), 0)
ret['Mlist'][i] = rel_SE3
G = np.diag(sim.model.body_inertia[muj_id])
mI = sim.model.body_mass[muj_id] * np.eye(3)
Gi = np.zeros((6,6))
Gi[0:3,0:3] = G
Gi[3:6,3:6] = mI
ret['Glist'][i] = tf.convert_to_tensor(Gi, tf.float32)
ret['Mlist'] = tf.stack(ret['Mlist'],0)
ret['Glist'] = tf.stack(ret['Glist'],0)
ret['Slist'] = [None]*nq
for i in range(nq):
R = muj_global_joint_SO3[i]
p = muj_global_joint_pos[i]
Tsj = Rp_to_SE3(tf.expand_dims(tf.convert_to_tensor(R,tf.float32),0), tf.expand_dims(tf.convert_to_tensor(p,tf.float32),0))
adTsj = tf.squeeze(adjoint(Tsj),0)
if sim.model.jnt_type[i] == 2:
screw_axis = np.concatenate([np.zeros(3), sim.model.jnt_axis[i]], axis=0)
elif sim.model.jnt_type[i] == 3:
screw_axis = np.concatenate([sim.model.jnt_axis[i], np.zeros(3)], axis=0)
else:
raise ValueError("Wrong Joint Type")
screw_axis = tf.expand_dims(tf.convert_to_tensor(screw_axis, tf.float32),axis=1)
S = tf.squeeze(tf.matmul(adTsj, screw_axis),1)
ret['Slist'][i] = S
ret['Slist'] = tf.stack(ret['Slist'],0)
ret['init_ee_SE3'] = dict()
ret['Bidlist'] = dict()
ret['Blist'] = dict()
for ee in ee_list:
p = tf.expand_dims(tf.convert_to_tensor(muj_global_body_pos[sim.model.body_name2id(ee)], tf.float32),0)
R = tf.expand_dims(tf.convert_to_tensor(muj_global_body_SO3[sim.model.body_name2id(ee)], tf.float32),0)
ret['init_ee_SE3'][ee] = tf.squeeze(Rp_to_SE3(R,p),0)
ret['Bidlist'][ee] = [None]*len(Bidlist[ee])
ret['Blist'][ee] = [None]*len(Bidlist[ee])
for i, id in enumerate(Bidlist[ee]):
ret['Bidlist'][ee][i] = id
R = muj_global_joint_SO3[id]
p = muj_global_joint_pos[id]
Tsj = tf.squeeze(Rp_to_SE3(tf.expand_dims(tf.convert_to_tensor(R,tf.float32),0), tf.expand_dims(tf.convert_to_tensor(p,tf.float32),0)),0)
Tsb = ret['init_ee_SE3'][ee]
Tbs = tf.squeeze(SE3_inv(tf.expand_dims(Tsb,0)))
Tbj = tf.matmul(Tbs,Tsj)
adTbj = tf.squeeze(adjoint(tf.expand_dims(Tbj,0)),0)
if sim.model.jnt_type[id] == 2:
screw_axis = np.concatenate([np.zeros(3), sim.model.jnt_axis[id]], axis=0)
elif sim.model.jnt_type[id] == 3:
screw_axis = np.concatenate([sim.model.jnt_axis[id], np.zeros(3)], axis=0)
else:
raise ValueError("Wrong Joint Type")
screw_axis = tf.expand_dims(tf.convert_to_tensor(screw_axis, tf.float32),axis=1)
B = tf.squeeze(tf.matmul(adTbj, screw_axis),1)
ret['Blist'][ee][i] = B
ret['Bidlist'][ee] = tf.stack(ret['Bidlist'][ee],0)
ret['Blist'][ee] = tf.stack(ret['Blist'][ee],0)
if verbose:
print("="*80)
print("Infos about Return Value")
pretty_print_dictionary(ret)
print("="*80)
return ret
class GripperTester:
"""
A class that is used to test gripper
Args:
gripper (GripperModel): A gripper instance to be tested
pos (str): (x y z) position to place the gripper in string form, e.g. '0 0 0.3'
quat (str): rotation to apply to gripper in string form, e.g. '0 0 1 0' to flip z axis
gripper_low_pos (float): controls the gipper y position, larger -> higher
gripper_high_pos (float): controls the gipper y high position larger -> higher,
must be larger than gripper_low_pos
box_size (None or 3-tuple of int): the size of the box to grasp, None defaults to [0.02, 0.02, 0.02]
box_density (int): the density of the box to grasp
step_time (int): the interval between two gripper actions
render (bool): if True, show rendering
"""
def __init__(
self,
gripper,
pos,
quat,
gripper_low_pos,
gripper_high_pos,
box_size=None,
box_density=10000,
step_time=400,
render=True,
):
# define viewer
self.viewer = None
world = MujocoWorldBase()
# Add a table
arena = TableArena(table_full_size=(0.4, 0.4, 0.1), table_offset=(0, 0, 0.1), has_legs=False)
world.merge(arena)
# Add a gripper
self.gripper = gripper
# Create another body with a slider joint to which we'll add this gripper
gripper_body = ET.Element("body")
gripper_body.set("pos", pos)
gripper_body.set("quat", quat) # flip z
gripper_body.append(new_joint(name="gripper_z_joint", type="slide", axis="0 0 -1", damping="50"))
# Add all gripper bodies to this higher level body
for body in gripper.worldbody:
gripper_body.append(body)
# Merge the all of the gripper tags except its bodies
world.merge(gripper, merge_body=None)
# Manually add the higher level body we created
world.worldbody.append(gripper_body)
# Create a new actuator to control our slider joint
world.actuator.append(new_actuator(joint="gripper_z_joint", act_type="position", name="gripper_z", kp="500"))
# Add an object for grasping
# density is in units kg / m3
TABLE_TOP = [0, 0, 0.09]
if box_size is None:
box_size = [0.02, 0.02, 0.02]
box_size = np.array(box_size)
self.cube = BoxObject(
name="object", size=box_size, rgba=[1, 0, 0, 1], friction=[1, 0.005, 0.0001], density=box_density
)
object_pos = np.array(TABLE_TOP + box_size * [0, 0, 1])
mujoco_object = self.cube.get_obj()
# Set the position of this object
mujoco_object.set("pos", array_to_string(object_pos))
# Add our object to the world body
world.worldbody.append(mujoco_object)
# add reference objects for x and y axes
x_ref = BoxObject(
name="x_ref", size=[0.01, 0.01, 0.01], rgba=[0, 1, 0, 1], obj_type="visual", joints=None
).get_obj()
x_ref.set("pos", "0.2 0 0.105")
world.worldbody.append(x_ref)
y_ref = BoxObject(
name="y_ref", size=[0.01, 0.01, 0.01], rgba=[0, 0, 1, 1], obj_type="visual", joints=None
).get_obj()
y_ref.set("pos", "0 0.2 0.105")
world.worldbody.append(y_ref)
self.world = world
self.render = render
self.simulation_ready = False
self.step_time = step_time
self.cur_step = 0
if gripper_low_pos > gripper_high_pos:
raise ValueError(
"gripper_low_pos {} is larger " "than gripper_high_pos {}".format(gripper_low_pos, gripper_high_pos)
)
self.gripper_low_pos = gripper_low_pos
self.gripper_high_pos = gripper_high_pos
def start_simulation(self):
"""
Starts simulation of the test world
"""
model = self.world.get_model(mode="mujoco_py")
self.sim = MjSim(model)
if self.render:
self.viewer = MjViewer(self.sim)
self.sim_state = self.sim.get_state()
# For gravity correction
gravity_corrected = ["gripper_z_joint"]
self._gravity_corrected_qvels = [self.sim.model.get_joint_qvel_addr(x) for x in gravity_corrected]
self.gripper_z_id = self.sim.model.actuator_name2id("gripper_z")
self.gripper_z_is_low = False
self.gripper_actuator_ids = [self.sim.model.actuator_name2id(x) for x in self.gripper.actuators]
self.gripper_is_closed = True
self.object_id = self.sim.model.body_name2id(self.cube.root_body)
object_default_pos = self.sim.data.body_xpos[self.object_id]
self.object_default_pos = np.array(object_default_pos, copy=True)
self.reset()
self.simulation_ready = True
def reset(self):
"""
Resets the simulation to the initial state
"""
self.sim.set_state(self.sim_state)
self.cur_step = 0
def close(self):
"""
Close the viewer if it exists
"""
if self.viewer is not None:
self.viewer.close()
def step(self):
"""
Forward the simulation by one timestep
Raises:
RuntimeError: if start_simulation is not yet called.
"""
if not self.simulation_ready:
raise RuntimeError("Call start_simulation before calling step")
if self.gripper_z_is_low:
self.sim.data.ctrl[self.gripper_z_id] = self.gripper_low_pos
else:
self.sim.data.ctrl[self.gripper_z_id] = self.gripper_high_pos
if self.gripper_is_closed:
self._apply_gripper_action(1)
else:
self._apply_gripper_action(-1)
self._apply_gravity_compensation()
self.sim.step()
if self.render:
self.viewer.render()
self.cur_step += 1
def _apply_gripper_action(self, action):
"""
Applies binary gripper action
Args:
action (int): Action to apply. Should be -1 (open) or 1 (closed)
"""
gripper_action_actual = self.gripper.format_action(np.array([action]))
# rescale normalized gripper action to control ranges
ctrl_range = self.sim.model.actuator_ctrlrange[self.gripper_actuator_ids]
bias = 0.5 * (ctrl_range[:, 1] + ctrl_range[:, 0])
weight = 0.5 * (ctrl_range[:, 1] - ctrl_range[:, 0])
applied_gripper_action = bias + weight * gripper_action_actual
self.sim.data.ctrl[self.gripper_actuator_ids] = applied_gripper_action
def _apply_gravity_compensation(self):
"""
Applies gravity compensation to the simulation
"""
self.sim.data.qfrc_applied[self._gravity_corrected_qvels] = self.sim.data.qfrc_bias[
self._gravity_corrected_qvels
]
def loop(self, total_iters=1, test_y=False, y_baseline=0.01):
"""
Performs lower, grip, raise and release actions of a gripper,
each separated with T timesteps
Args:
total_iters (int): Iterations to perform before exiting
test_y (bool): test if object is lifted
y_baseline (float): threshold for determining that object is lifted
"""
seq = [(False, False), (True, False), (True, True), (False, True)]
for cur_iter in range(total_iters):
for cur_plan in seq:
self.gripper_z_is_low, self.gripper_is_closed = cur_plan
for step in range(self.step_time):
self.step()
if test_y:
if not self.object_height > y_baseline:
raise ValueError(
"object is lifed by {}, ".format(self.object_height)
+ "not reaching the requirement {}".format(y_baseline)
)
@property
def object_height(self):
"""
Queries the height (z) of the object compared to on the ground
Returns:
float: Object height relative to default (ground) object position
"""
return self.sim.data.body_xpos[self.object_id][2] - self.object_default_pos[2]
class PushPuckBase(ABC):
def __init__(self,
n_substeps: int = 1,
render: bool = False):
self.render = render
set_puck(raw_xml_path=self.raw_xml_path, xml_path=self.xml_path, puck_size=None, puck_pos=None)
model = load_model_from_path(self.xml_path)
self.sim = MjSim(model=model, nsubsteps=n_substeps)
self.viewer = MjViewer(self.sim) if render else None
self.reset()
def __call__(self, weights, extra_timesteps=1000):
self.reset()
return self.rollout(weights, extra_timesteps)
def reset(self) -> None:
"""Resets the environment (including the agent) to the initial conditions.
"""
self.sim.reset()
# Set initial position and velocity
self.qpos = self.sim.data.qpos.copy()
self.qpos[:self.robot_init_qpos.shape[0]] = self.robot_init_qpos
qvel = np.zeros(self.sim.data.qvel.shape)
mjSimState = MjSimState(time=0.0, qpos=self.qpos, qvel=qvel, act=None, udd_state={})
self.sim.set_state(mjSimState)
self.sim.forward()
@property
def xml_path(self) -> str:
return str(Path(__file__).resolve().parents[0]) + '/' + 'assets/xml_model/env_model.xml'
def set_target(self, target_pos) -> None:
"""
Sets the postion of the target.
:param target_pos: Desired target position
"""
if target_pos is None:
target_pos = [0.7, 0, 0.02]
body_id = self.sim.model.body_name2id('target')
self.sim.model.body_pos[body_id] = target_pos
self.sim.forward()
@property
def target_pos(self):
"""
Helper for getting the current target position.
:return: Current target position
"""
return self.sim.data.get_site_xpos('target:site1').copy()
@property
def puck_pos(self):
"""
Helper for getting the current puck position.
:return: Current puck position
"""
return self.sim.data.get_body_xpos('puck').copy()
@property
def tcp_pos(self):
"""
Helper for getting the current end effector position.
:return: Current end effector position
"""
return self.sim.data.get_body_xpos('tcp').copy()
@property
@abstractmethod
def raw_xml_path(self):
raise NotImplementedError
@property
@abstractmethod
def robot_init_qpos(self):
raise NotImplementedError
@property
@abstractmethod
def robot_final_qpos(self):
raise NotImplementedError
@abstractmethod
def rollout(self, weights, goal_pos, extra_timesteps=200):
raise NotImplementedError
print("t: %5.3f" % time)
print("qpos: ", qpos)
print("qvel: ", qvel)
print("tosser (slide,hinge): ", qpos[:2])
print("object (z,y,pitch): ", qpos[-3:])
model = load_model_from_path("../../xmls/tosser.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
sim_state = sim.get_state()
while True:
sim.set_state(sim_state)
for i in range(1000):
state = sim.get_state()
# time, qpos, qvel, act, udd_state = state.time, state.qpos, state.qvel, state.act, state.udd_state
# print(time, qpos, qvel)
print_state(state)
if i < 150:
sim.data.ctrl[0] = -0.0
sim.data.ctrl[1] = -0.0
else:
sim.data.ctrl[0] = -1.0
sim.data.ctrl[1] = -1.0
sim.step()
viewer.render()
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self, model_path, frame_skip):
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets", model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
assert not done
self.obs_dim = np.sum([o.size for o in observation]) if type(observation) is tuple else observation.size
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
high = np.inf*np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def viewer_setup(self):
"""
Does not work. Use mj_viewer_setup() instead
"""
pass
def evaluate_success(self, paths, logger=None):
"""
Log various success metrics calculated based on input paths into the logger
"""
pass
# -----------------------------
def _reset(self):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq,) and qvel.shape == (self.model.nv,)
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 0.5
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self):
return None
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([
state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self, policy, horizon=1000, num_episodes=1, mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self, policy, horizon=1000,
num_episodes=1,
frame_size=(640,480),
mode='exploration',
save_loc='/tmp/',
filename='newvid',
camera_name=None):
import skvideo.io
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
curr_frame = self.sim.render(width=frame_size[0], height=frame_size[1],
mode='offscreen', camera_name=camera_name, device_id=0)
arrs.append(curr_frame[::-1,:,:])
print(t, end=', ', flush=True)
file_name = save_loc + filename + str(ep) + ".mp4"
skvideo.io.vwrite( file_name, np.asarray(arrs))
print("saved", file_name)
t1 = timer.time()
print("time taken = %f"% (t1-t0))