def play(self, mocap_filepath):
from mujoco_py import load_model_from_xml, MjSim, MjViewer
curr_path = getcwd()
xmlpath = '/mujoco/humanoid_deepmimic/envs/asset/dp_env_v2.xml'
with open(curr_path + xmlpath) as fin:
MODEL_XML = fin.read()
model = load_model_from_xml(MODEL_XML)
sim = MjSim(model)
viewer = MjViewer(sim)
self.read_raw_data(mocap_filepath)
self.convert_raw_data()
from time import sleep
phase_offset = np.array([0.0, 0.0, 0.0])
while True:
for k in range(len(self.data)):
tmp_val = self.data_config[k]
sim_state = sim.get_state()
sim_state.qpos[:] = tmp_val[:]
sim_state.qpos[:3] += phase_offset[:]
sim.set_state(sim_state)
sim.forward()
viewer.render()
sim_state = sim.get_state()
phase_offset = sim_state.qpos[:3]
phase_offset[2] = 0
class MujocoSimulation(Simulation):
def __init__(self, name, total_time=1000, recording_time=[0, 1000]):
super(MujocoSimulation, self).__init__(name,
total_time=total_time,
recording_time=recording_time)
self.model = load_model_from_path('mujoco_xmls/' + name + '.xml')
self.sim = MjSim(self.model)
self.initial_state = self.sim.get_state()
self.input_size = len(self.sim.data.ctrl)
self.reset()
self.viewer = None
def reset(self):
super(MujocoSimulation, self).reset()
self.sim.set_state(self.initial_state)
def run(self, reset=True):
if reset:
self.reset()
self.sim.set_state(self.initial_state)
for i in range(self.total_time):
self.sim.data.ctrl[:] = self.ctrl_array[i]
self.sim.step()
self.trajectory.append(self.sim.get_state())
self.alreadyRun = True
def get_trajectory(self, all_info=True):
if not self.alreadyRun:
self.run()
if all_info:
return self.trajectory.copy()
else:
return [x.qpos for x in self.trajectory]
def get_recording(self, all_info=True):
traj = self.get_trajectory(all_info=all_info)
return traj[self.recording_time[0]:self.recording_time[1]]
def watch(self, repeat_count=4):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
for _ in range(repeat_count):
self.sim.set_state(self.initial_state)
for i in range(self.total_time):
self.sim.data.ctrl[:] = self.ctrl_array[i]
self.sim.step()
self.viewer.render()
self.run(
reset=False
) # so that the trajectory will be compatible with what user watches
def find_contact_height(sim: mj.MjSim, iterations: int = 10) -> float:
""" Find the height we should put our walker at so we are just barely in contact with the ground.
Runs a binary search on height (assumed to be state[1][2]) such that the body with the minimum z coordinate
on the ground is just barely in contact with the ground.
Args:
sim: the instantiated sim MjSim object you want to find the correct height for
iterations: number of times to run_util the binary search
Returns:
just the height as a float, you'll need to set it yourself
"""
state = sim.get_state()
height_guess = state[1][1]
step = height_guess * 2 # upper range for how much we will search for
for _ in range(iterations):
if sim.data.ncon: # ncon is the number of collisions
height_guess += step
else:
height_guess -= step
state[1][1] = height_guess
sim.set_state(state)
sim.forward()
step /= 2
return height_guess
def _setup_render_rgb(sim: mujoco_py.MjSim) -> mujoco_py.MjSim: # create copy of simulation to customize rendering context # flags defined in mjvisualize.h render_sim = mujoco_py.MjSim(sim.model) render_sim.set_state(sim.get_state()) render_ctx = mujoco_py.MjRenderContextOffscreen(render_sim) render_ctx.scn.stereo = 2 # side-by-side rendering return render_sim
def run_activations_fcn(est_activations,
model_ver=0,
timestep=0.005,
Mj_render=False):
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the q0 is now the chasis pos. needs to be fixed
"""
this function runs the predicted activations generatred from running
the inverse map on the desired task kinematics
"""
#loading data
#print("loading data")
#task_kinematics=np.load("task_kinematics.npy")
#est_task_activations=np.load("est_task_activations.npy")
model = load_model_from_path(
"./models/nmi_leg_w_chassis_v{}.xml".format(model_ver))
sim = MjSim(model)
if Mj_render:
viewer = MjViewer(sim)
# viewer.cam.fixedcamid += 1
# viewer.cam.type = const.CAMERA_FIXED
sim_state = sim.get_state()
control_vector_length = sim.data.ctrl.__len__()
print("control_vector_length: " + str(control_vector_length))
number_of_task_samples = est_activations.shape[0]
real_attempt_positions = np.zeros((number_of_task_samples, 2))
real_attempt_activations = np.zeros((number_of_task_samples, 3))
chassis_pos = np.zeros(number_of_task_samples, )
sim.set_state(sim_state)
for ii in range(number_of_task_samples):
sim.data.ctrl[:] = est_activations[ii, :]
sim.step()
current_positions_array = sim.data.qpos[-2:]
# current_kinematics_array=np.array(
# [sim.data.qpos[0],
# sim.data.qvel[0],
# sim.data.qacc[0],
# sim.data.qpos[1],
# sim.data.qvel[1],
# sim.data.qacc[1]]
# )
chassis_pos[ii] = sim.data.get_geom_xpos("Chassis_frame")[0]
real_attempt_positions[ii, :] = current_positions_array
real_attempt_activations[ii, :] = sim.data.ctrl
if Mj_render:
viewer.render()
real_attempt_kinematics = positions_to_kinematics_fcn(
real_attempt_positions[:, 0],
real_attempt_positions[:, 1],
timestep=0.005)
return real_attempt_kinematics, real_attempt_activations, chassis_pos
def test_dampingControl():
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
timestep = generatePatternedTrajectories.TIMESTEP
control_freq = 1/timestep
total_time = 2
num_cycles = int(total_time * control_freq)
plt.ion()
LW = 1.0
fig = plt.figure(figsize=(4,15))
axes = []
lines = []
goals = []
for i in range(7):
axes.append(fig.add_subplot(7,1,i+1))
lines.append(axes[i].plot([],[],'b-', lw=LW)[0])
goals.append(axes[i].plot([],[],'r-', lw=LW)[0])
axes[i].set_ylim([-1, 1])
axes[i].set_xlim([0,total_time])
axes[i].set_ylabel("Angle{}(rad)".format(i), fontsize=8)
axes[i].set_xlabel("Time(s)", fontsize=8)
for test in range(5):
q_init = bounds.getRandPosInBounds()
qd_goal = np.zeros(7)
qd_init = np.random.rand(7)
for g in range(7):
goals[g].set_ydata(np.ones(num_cycles) * qd_goal[g])
goals[g].set_xdata(np.linspace(0,3,num_cycles))
sim.set_state(MjSimState(time=0,qpos=q_init,qvel=qd_init,act=None,udd_state={}))
sim.step()
sim_time = 0
for i in range(num_cycles):
state = sim.get_state()
q = state[1]
qd = state[2]
sim.data.ctrl[:] = controllers.dampingControl(qd=qd)
sim.step()
viewer.render()
if i % 35 == 0:
for a in range(7):
lines[a].set_xdata(np.append(lines[a].get_xdata(), sim_time))
lines[a].set_ydata(np.append(lines[a].get_ydata(), qd[a]))
fig.canvas.draw()
fig.canvas.flush_events()
sim_time += timestep
if bounds.outOfBounds(q):
break
for i in range(7):
lines[i].set_xdata([])
lines[i].set_ydata([])
time.sleep(1)
def run_activations_fcn(MuJoCo_model_name, est_activations, timestep=0.01, Mj_render=False):
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! the q0 is now the chasis pos. needs to be fixed
"""
this function runs the predicted activations generatred from running
the inverse map on the desired task kinematics
"""
#loading data
#print("loading data")
#task_kinematics=np.load("task_kinematics.npy")
#est_task_activations=np.load("est_task_activations.npy")
MuJoCo_model = load_model_from_path("./models/"+MuJoCo_model_name)
sim = MjSim(MuJoCo_model)
if Mj_render:
viewer = MjViewer(sim)
# to move it to the mounted camera
viewer.cam.fixedcamid += 1
viewer.cam.type = const.CAMERA_FIXED
# # to record the video
# viewer._record_video = True
# # recording path
# viewer._video_path = "~/Documents/"+str(time.localtime()[3])+str(time.localtime()[4])+str(time.localtime()[5])
sim_state = sim.get_state()
control_vector_length=sim.data.ctrl.__len__()
#print("control_vector_length: "+str(control_vector_length))
number_of_task_samples=est_activations.shape[0]
real_attempt_positions = np.zeros((number_of_task_samples,2))
real_attempt_activations = np.zeros((number_of_task_samples,3))
chassis_pos=np.zeros(number_of_task_samples,)
sim.set_state(sim_state)
for ii in range(number_of_task_samples):
sim.data.ctrl[:] = est_activations[ii,:]
sim.step()
current_positions_array = sim.data.qpos[-2:]
# current_kinematics_array=np.array(
# [sim.data.qpos[0],
# sim.data.qvel[0],
# sim.data.qacc[0],
# sim.data.qpos[1],
# sim.data.qvel[1],
# sim.data.qacc[1]]
# )
chassis_pos[ii]=sim.data.get_geom_xpos("Chassis_frame")[0]
real_attempt_positions[ii,:] = current_positions_array
real_attempt_activations[ii,:] = sim.data.ctrl
if Mj_render:
viewer.render()
real_attempt_kinematics = positions_to_kinematics_fcn(
real_attempt_positions[:,0], real_attempt_positions[:,1], timestep = 0.01)
return real_attempt_kinematics, real_attempt_activations, chassis_pos
def _setup_render_depth(sim: mujoco_py.MjSim) -> mujoco_py.MjSim: # create copy of simulation to customize rendering context # flags defined in mjvisualize.h render_sim = mujoco_py.MjSim(sim.model) render_sim.set_state(sim.get_state()) render_ctx = mujoco_py.MjRenderContextOffscreen(render_sim) render_ctx.vopt.flags[1] = 0 # textures off render_ctx.scn.flags[0] = 0 # shadow off render_ctx.scn.flags[2] = 0 # reflection off render_ctx.scn.flags[4] = 0 # skybox off render_ctx.scn.stereo = 2 # side-by-side rendering return render_sim
class MyEnv(gym.Env):
metadata = {'render.modes': ['human']}
def __init__(self):
self.model = load_model_from_path("xmls/Tesrt.xml")
self.sim = MjSim(self.model)
self.viewer = None
self.sim_state = self.sim.get_state()
self.bodynames = [
'torso1', 'head', 'uwaist', 'lwaist', 'butt',
'right_thigh1', 'right_shin1', 'right_foot_cap1', 'right_foot_cap2', 'left_thigh1',
'left_shin1', 'left_foot_cap1', 'left_foot_cap2', 'right_uarm1', 'right_larm',
'right_hand', 'left_uarm1', 'left_larm', 'left_hand'
]
ones_act = np.ones(len(self.sim.data.ctrl))
ones_obs = np.ones(self._get_state().shape[0])
self.action_space = spaces.Box(-ones_act, ones_act)
self.observation_space = spaces.Box(-ones_obs, ones_obs)
def _get_state(self):
torso = []
ret = []
for i in range(len(self.bodynames)):
vec = self.sim.data.get_geom_xpos(self.bodynames[i])
if i==0:
ret = vec
torso = vec
if i!=0:
ret = np.append(ret, vec-torso)
return ret
def _get_reward(self):
return self.sim.data.get_geom_xpos('head')[2]
def _step(self, action):
for i in range(len(action)):
self.sim.data.ctrl[i] = action[i] * 0.5
self.sim.step()
self.sim.step()
return self._get_state(),self._get_reward(),False,{}
def _reset(self):
self.sim.set_state(self.sim_state)
return self._get_state()
def _render(self, mode = 'human', close = False):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
self.viewer.render()
def test_cycle_through_orientations():
panda_kinematics = ikpy_panda_kinematics.panda_kinematics()
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
x_target, y_target, z_target = 0.2, 0.0, 0.5
step1 = np.linspace(0,np.pi/2, 100)
step2 = np.linspace(np.pi/2, -np.pi/2, 200)
step3 = np.linspace(-np.pi/2, 0, 100)
sweep = np.concatenate((step1, step2, step3))
roll = 0
pitch = 0
yaw = np.pi
ee_goal = [x_target, y_target, z_target, roll, pitch, yaw]
qinit = panda_kinematics.inverse_kinematics(translation=ee_goal[0:3], rpy=ee_goal[3:6])
sim.set_state(MjSimState(time=0,qpos=qinit,qvel=np.zeros(7),act=None,udd_state={}))
sim.step()
qgoal = qinit
q = qinit
qd = np.zeros(7)
count = -1
num_steps_per_change = 4
for i in range(num_steps_per_change * 400):
if i % num_steps_per_change == 0:
count += 1
ee_goal = [x_target, y_target, z_target, roll, pitch, sweep[count] + yaw]
qgoal = panda_kinematics.inverse_kinematics(translation=ee_goal[0:3], rpy=ee_goal[3:6], init_qpos=q)
R1 = panda_kinematics.euler_angles_to_rpy_rotation_matrix(rpy=[roll, pitch, sweep[count] + yaw])
R2 = panda_kinematics.euler_angles_to_rpy_rotation_matrix(panda_kinematics.forward_kinematics(qgoal)[3:6])
# R3 = sim.data.body_xmat[sim.model.body_name2id("right_hand")].reshape(3, 3)
print("R1:\n", R1)
print("R2:\n", R2)
# print("R3:\n", R3)
print("EE:", np.around(ee_goal, 3))
print("q: ", np.around(qgoal, 3))
state = sim.get_state()
q = state[1]
qd = state[2]
sim.data.ctrl[:] = controllers.PDControl(q=q,qd=qd,qgoal=qgoal)
sim.step()
viewer.render()
time.sleep(1)
class Mujoco_Renderer():
def __init__(self, mujoco_xml, hp):
from mujoco_py import load_model_from_path, MjSim
mujoco_xml = '/'.join(str.split(gcp.__file__, '/')[:-1]) + '/' + mujoco_xml
self.sim = MjSim(load_model_from_path(mujoco_xml))
self._hp = hp
def render(self, qpos):
sim_state = self.sim.get_state()
sim_state.qpos[:2] = qpos
sim_state.qvel[:] = np.zeros_like(self.sim.data.qvel)
self.sim.set_state(sim_state)
self.sim.forward()
subgoal_image = self.sim.render(self._hp.mpar.img_sz, self._hp.mpar.img_sz, camera_name='maincam')
# plt.imshow(subgoal_image)
# plt.savefig('test.png')
return subgoal_image
class ArmTaskEnv:
"""
States:
sensors
Actions:
actuators
"""
def __init__(self, model_file):
# Load model to MuJoCo
self.model_file = model_file
self.mj_model = load_model_from_path(model_file)
self.sim = MjSim(self.mj_model)
#self.sim = mujoco.Physics.from_xml_path(model_file)
# Parse state and action spaces
self.state_dim = len(self.sim.data.sensordata)
self.action_dim = len(self.sim.data.ctrl)
# Rendering
self.viewer = None
def reset(self):
self.sim.reset()
def step(self, action):
# Assign action to actuators
self.sim.data.ctrl[:] = action.copy()
# Simulate step
self.sim.step()
# Get next state
next_state = self.sim.data.sensordata.copy()
return next_state
def render(self):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
self.viewer.render()
@property
def time(self):
return self.sim.get_state().time
def __init__(self, sparse_reward=True, horizon=250):
#print(horizon)
self.sparse_reward = sparse_reward
model = load_model_from_path("difficult-point.xml")
sim = MjSim(model)
self.sim = sim
viewer = MjViewer(sim)
self.init_state = sim.get_state()
self.model = model
self.viewer = viewer
self.action_dim = len(self.sim.data.ctrl)
self.obs_dim = len(self.get_obs())
high = np.array([np.inf] * self.obs_dim)
# self.action_space = spaces.Box(np.array([-1, -1, -1, -1]), np.array([1, 1, 1, 1]), dtype=np.float32)
self.observation_space = spaces.Box(-high, high, dtype=np.float32)
high = np.array([2.0] * self.action_dim)
self.action_space = spaces.Box(-high, high, dtype=np.float32)
self.metadata = None
self.horizon = horizon
self.cur_step = 0
def mp_test_states():
sim = MjSim(load_model_from_xml(BASIC_MODEL_XML))
states = []
for val in range(3):
sim.data.qpos[:3] = val * 0.1
states.append(sim.get_state())
pool = MjRenderPool(sim.model, n_workers=3)
images = pool.render(100, 100, states=states[:2])
assert images.shape == (2, 100, 100, 3)
compare_imgs(images[0], 'test_render_pool.mp_test_states.1.png')
compare_imgs(images[1], 'test_render_pool.mp_test_states.2.png')
states = list(reversed(states))
images = pool.render(100, 100, states=states)
assert images.shape == (3, 100, 100, 3)
compare_imgs(images[0], 'test_render_pool.mp_test_states.3.png')
compare_imgs(images[1], 'test_render_pool.mp_test_states.4.png')
compare_imgs(images[2], 'test_render_pool.mp_test_states.5.png')
class FastResetMujocoEnv(MujocoEnv):
"""Only loads the mujoco XML file once to allow for quicker resets."""
def _reset_internal(self):
"""Resets simulation internal configurations."""
# instantiate simulation from MJCF model
self._load_model()
if not hasattr(self, "mjpy_model"):
self.mjpy_model = self.model.get_model(mode="mujoco_py")
self.sim = MjSim(self.mjpy_model)
self.initialize_time(self.control_freq)
# create visualization screen or renderer
if self.has_renderer and self.viewer is None:
self.viewer = MujocoPyRenderer(self.sim)
self.viewer.viewer.vopt.geomgroup[0] = (
1 if self.render_collision_mesh else 0
)
self.viewer.viewer.vopt.geomgroup[1] = 1 if self.render_visual_mesh else 0
# hiding the overlay speeds up rendering significantly
self.viewer.viewer._hide_overlay = True
elif self.has_offscreen_renderer:
if self.sim._render_context_offscreen is None:
render_context = MjRenderContextOffscreen(self.sim)
self.sim.add_render_context(render_context)
self.sim._render_context_offscreen.vopt.geomgroup[0] = (
1 if self.render_collision_mesh else 0
)
self.sim._render_context_offscreen.vopt.geomgroup[1] = (
1 if self.render_visual_mesh else 0
)
# additional housekeeping
self.sim_state_initial = self.sim.get_state()
self._get_reference()
self.cur_time = 0
self.timestep = 0
self.done = False
class Actor(Environment):
def __init__(self, model_path, epsilon, epsilon_min, epsilon_decay,
max_steps):
self.epsilon = epsilon
self.epsilon_min = epsilon_min
self.epsilon_decay = epsilon_decay
self.model3D = load_model_from_path(model_path)
self.sim = MjSim(self.model3D)
self.q_network = None
self.max_steps = max_steps
Environment.__init__(self, self.sim)
def load_model(self, path):
self.q_network = load_model(path)
def get_possible_actions(self):
return np.array([[-1], [1]])
def do_action(self, a):
self.sim.data.ctrl[0:] = a
def act(self, state):
q_values = self.q_network.predict(state)
if random.random() < self.epsilon:
action = random.randint(0, len(q_values[0]) - 1)
else:
action = np.argmax(q_values)
return action
def observe(self, state):
action = self.act(state)
self.do_action(self.get_possible_actions()[action])
self.sim.step()
s = np.array([
self.sim.get_state().qpos.tolist() +
self.sim.get_state().qvel.tolist()
])
r = self.get_reward()
return s, action, r, self.is_done()
def __init__(self, sparse_reward=False, horizon=700, fixed_reset=True):
self.sparse_reward = sparse_reward
model = load_model_from_path("envs/reacher.xml")
sim = MjSim(model)
self.sim = sim
viewer = MjViewer(sim)
self.init_state = sim.get_state()
self.model = model
self.viewer = viewer
self.action_dim = len(self.sim.data.ctrl)
#print(self.action_dim)
self.obs_dim = len(self.get_obs())
self.fixed_reset = fixed_reset
high = np.array([np.inf] * self.obs_dim)
# self.action_space = spaces.Box(np.array([-1, -1, -1, -1]), np.array([1, 1, 1, 1]), dtype=np.float32)
self.observation_space = spaces.Box(-high, high, dtype=np.float32)
high = np.array([2.0] * self.action_dim)
self.action_space = spaces.Box(-high, high, dtype=np.float32)
self.metadata = None
self.horizon = horizon
self.cur_step = 0
def __init__(self, sparse_reward=False, horizon=200):
self.goal_idx = 0 #np.random.randint(0, 4)
self.goal_one_hot = np.array([0, 0, 0, 0])
self.goal_one_hot[self.goal_idx] = 1
self.sparse_reward = sparse_reward
model = load_model_from_path("envs/ReacherDistractor.xml")
sim = MjSim(model)
self.sim = sim
viewer = MjViewer(sim)
self.init_state = sim.get_state()
self.model = model
self.viewer = viewer
self.action_dim = len(self.sim.data.ctrl)
self.obs_dim = len(self.get_obs())
high = np.array([np.inf] * self.obs_dim)
# self.action_space = spaces.Box(np.array([-1, -1, -1, -1]), np.array([1, 1, 1, 1]), dtype=np.float32)
self.observation_space = spaces.Box(-high, high, dtype=np.float32)
high = np.array([2.0] * self.action_dim)
self.action_space = spaces.Box(-high, high, dtype=np.float32)
self.metadata = None
self.horizon = horizon
self.cur_step = 0
class MujocoEnv(metaclass=EnvMeta):
"""
Initializes a Mujoco Environment.
Args:
has_renderer (bool): If true, render the simulation state in
a viewer instead of headless mode.
has_offscreen_renderer (bool): True if using off-screen rendering.
render_camera (str): Name of camera to render if `has_renderer` is True. Setting this value to 'None'
will result in the default angle being applied, which is useful as it can be dragged / panned by
the user using the mouse
render_collision_mesh (bool): True if rendering collision meshes
in camera. False otherwise.
render_visual_mesh (bool): True if rendering visual meshes
in camera. False otherwise.
render_gpu_device_id (int): corresponds to the GPU device id to use for offscreen rendering.
Defaults to -1, in which case the device will be inferred from environment variables
(GPUS or CUDA_VISIBLE_DEVICES).
control_freq (float): how many control signals to receive
in every simulated second. This sets the amount of simulation time
that passes between every action input.
horizon (int): Every episode lasts for exactly @horizon timesteps.
ignore_done (bool): True if never terminating the environment (ignore @horizon).
hard_reset (bool): If True, re-loads model, sim, and render object upon a reset call, else,
only calls sim.reset and resets all robosuite-internal variables
renderer (str): string for the renderer to use
renderer_config (dict): dictionary for the renderer configurations
Raises:
ValueError: [Invalid renderer selection]
"""
def __init__(
self,
has_renderer=False,
has_offscreen_renderer=True,
render_camera="frontview",
render_collision_mesh=False,
render_visual_mesh=True,
render_gpu_device_id=-1,
control_freq=20,
horizon=1000,
ignore_done=False,
hard_reset=True,
renderer="mujoco",
renderer_config=None,
):
# First, verify that both the on- and off-screen renderers are not being used simultaneously
if has_renderer is True and has_offscreen_renderer is True:
raise ValueError("the onscreen and offscreen renderers cannot be used simultaneously.")
# Rendering-specific attributes
self.has_renderer = has_renderer
self.has_offscreen_renderer = has_offscreen_renderer
self.render_camera = render_camera
self.render_collision_mesh = render_collision_mesh
self.render_visual_mesh = render_visual_mesh
self.render_gpu_device_id = render_gpu_device_id
self.viewer = None
# Simulation-specific attributes
self._observables = {} # Maps observable names to observable objects
self._obs_cache = {} # Maps observable names to pre-/partially-computed observable values
self.control_freq = control_freq
self.horizon = horizon
self.ignore_done = ignore_done
self.hard_reset = hard_reset
self._model_postprocessor = None # Function to post-process model after load_model() call
self.model = None
self.cur_time = None
self.model_timestep = None
self.control_timestep = None
self.deterministic_reset = False # Whether to add randomized resetting of objects / robot joints
self.renderer = renderer
self.renderer_config = renderer_config
# Load the model
self._load_model()
# Post-process model
self._postprocess_model()
# Initialize the simulation
self._initialize_sim()
#initializes the rendering
self.initialize_renderer()
# Run all further internal (re-)initialization required
self._reset_internal()
# Load observables
if hasattr(self.viewer, '_setup_observables'):
self._observables = self.viewer._setup_observables()
else:
self._observables = self._setup_observables()
# check if viewer has get observations method and set a flag for future use.
self.viewer_get_obs = hasattr(self.viewer, '_get_observations')
def initialize_renderer(self):
self.renderer = self.renderer.lower()
if self.renderer_config is None and self.renderer != 'mujoco':
self.renderer_config = load_renderer_config(self.renderer)
if self.renderer == 'mujoco' or self.renderer == 'default':
pass
elif self.renderer == 'nvisii':
from robosuite.renderers.nvisii.nvisii_renderer import NVISIIRenderer
self.viewer = NVISIIRenderer(env=self,
**self.renderer_config)
elif self.renderer == 'igibson':
from robosuite.renderers.igibson.igibson_renderer import iGibsonRenderer
self.viewer = iGibsonRenderer(env=self,
**self.renderer_config
)
else:
raise ValueError(f'{self.renderer} is not a valid renderer name. Valid options include default (native mujoco renderer), nvisii, and igibson')
def initialize_time(self, control_freq):
"""
Initializes the time constants used for simulation.
Args:
control_freq (float): Hz rate to run control loop at within the simulation
"""
self.cur_time = 0
self.model_timestep = macros.SIMULATION_TIMESTEP
if self.model_timestep <= 0:
raise ValueError("Invalid simulation timestep defined!")
self.control_freq = control_freq
if control_freq <= 0:
raise SimulationError("Control frequency {} is invalid".format(control_freq))
self.control_timestep = 1. / control_freq
def set_model_postprocessor(self, postprocessor):
"""
Sets the post-processor function that self.model will be passed to after load_model() is called during resets.
Args:
postprocessor (None or function): If set, postprocessing method should take in a Task-based instance and
return no arguments.
"""
self._model_postprocessor = postprocessor
def _load_model(self):
"""Loads an xml model, puts it in self.model"""
pass
def _postprocess_model(self):
"""
Post-processes model after load_model() call. Useful for external objects (e.g.: wrappers) to
be able to modify the sim model before it is actually loaded into the simulation
"""
if self._model_postprocessor is not None:
self._model_postprocessor(self.model)
def _setup_references(self):
"""
Sets up references to important components. A reference is typically an
index or a list of indices that point to the corresponding elements
in a flatten array, which is how MuJoCo stores physical simulation data.
"""
# Setup mappings from model to IDs
self.model.generate_id_mappings(sim=self.sim)
def _setup_observables(self):
"""
Sets up observables to be used for this environment.
Returns:
OrderedDict: Dictionary mapping observable names to its corresponding Observable object
"""
return OrderedDict()
def _initialize_sim(self, xml_string=None):
"""
Creates a MjSim object and stores it in self.sim. If @xml_string is specified, the MjSim object will be created
from the specified xml_string. Else, it will pull from self.model to instantiate the simulation
Args:
xml_string (str): If specified, creates MjSim object from this filepath
"""
# if we have an xml string, use that to create the sim. Otherwise, use the local model
self.mjpy_model = load_model_from_xml(xml_string) if xml_string else self.model.get_model(mode="mujoco_py")
# Create the simulation instance and run a single step to make sure changes have propagated through sim state
self.sim = MjSim(self.mjpy_model)
self.sim.forward()
# Setup sim time based on control frequency
self.initialize_time(self.control_freq)
def reset(self):
"""
Resets simulation.
Returns:
OrderedDict: Environment observation space after reset occurs
"""
# TODO(yukez): investigate black screen of death
# Use hard reset if requested
if self.hard_reset and not self.deterministic_reset:
if self.renderer == 'mujoco' or self.renderer == 'default':
self._destroy_viewer()
self._load_model()
self._postprocess_model()
self._initialize_sim()
# Else, we only reset the sim internally
else:
self.sim.reset()
# Reset necessary robosuite-centric variables
self._reset_internal()
self.sim.forward()
# Setup observables, reloading if
self._obs_cache = {}
if self.hard_reset:
# If we're using hard reset, must re-update sensor object references
_observables = self._setup_observables()
for obs_name, obs in _observables.items():
self.modify_observable(observable_name=obs_name, attribute="sensor", modifier=obs._sensor)
# Make sure that all sites are toggled OFF by default
self.visualize(vis_settings={vis: False for vis in self._visualizations})
if self.viewer is not None and self.renderer != 'mujoco':
self.viewer.reset()
observations = self.viewer._get_observations(force_update=True) if self.viewer_get_obs else self._get_observations(force_update=True)
# Return new observations
return observations
def _reset_internal(self):
"""Resets simulation internal configurations."""
# create visualization screen or renderer
if self.has_renderer and self.viewer is None:
self.viewer = MujocoPyRenderer(self.sim)
self.viewer.viewer.vopt.geomgroup[0] = (1 if self.render_collision_mesh else 0)
self.viewer.viewer.vopt.geomgroup[1] = (1 if self.render_visual_mesh else 0)
# hiding the overlay speeds up rendering significantly
self.viewer.viewer._hide_overlay = True
# make sure mujoco-py doesn't block rendering frames
# (see https://github.com/StanfordVL/robosuite/issues/39)
self.viewer.viewer._render_every_frame = True
# Set the camera angle for viewing
if self.render_camera is not None:
self.viewer.set_camera(camera_id=self.sim.model.camera_name2id(self.render_camera))
elif self.has_offscreen_renderer:
if self.sim._render_context_offscreen is None:
render_context = MjRenderContextOffscreen(self.sim, device_id=self.render_gpu_device_id)
self.sim.add_render_context(render_context)
self.sim._render_context_offscreen.vopt.geomgroup[0] = (1 if self.render_collision_mesh else 0)
self.sim._render_context_offscreen.vopt.geomgroup[1] = (1 if self.render_visual_mesh else 0)
# additional housekeeping
self.sim_state_initial = self.sim.get_state()
self._setup_references()
self.cur_time = 0
self.timestep = 0
self.done = False
# Empty observation cache and reset all observables
self._obs_cache = {}
for observable in self._observables.values():
observable.reset()
def _update_observables(self, force=False):
"""
Updates all observables in this environment
Args:
force (bool): If True, will force all the observables to update their internal values to the newest
value. This is useful if, e.g., you want to grab observations when directly setting simulation states
without actually stepping the simulation.
"""
for observable in self._observables.values():
observable.update(timestep=self.model_timestep, obs_cache=self._obs_cache, force=force)
def _get_observations(self, force_update=False):
"""
Grabs observations from the environment.
Args:
force_update (bool): If True, will force all the observables to update their internal values to the newest
value. This is useful if, e.g., you want to grab observations when directly setting simulation states
without actually stepping the simulation.
Returns:
OrderedDict: OrderedDict containing observations [(name_string, np.array), ...]
"""
observations = OrderedDict()
obs_by_modality = OrderedDict()
# Force an update if requested
if force_update:
self._update_observables(force=True)
# Loop through all observables and grab their current observation
for obs_name, observable in self._observables.items():
if observable.is_enabled() and observable.is_active():
obs = observable.obs
observations[obs_name] = obs
modality = observable.modality + "-state"
if modality not in obs_by_modality:
obs_by_modality[modality] = []
# Make sure all observations are numpy arrays so we can concatenate them
array_obs = [obs] if type(obs) in {int, float} or not obs.shape else obs
obs_by_modality[modality].append(np.array(array_obs))
# Add in modality observations
for modality, obs in obs_by_modality.items():
# To save memory, we only concatenate the image observations if explicitly requested
if modality == "image-state" and not macros.CONCATENATE_IMAGES:
continue
observations[modality] = np.concatenate(obs, axis=-1)
return observations
def step(self, action):
"""
Takes a step in simulation with control command @action.
Args:
action (np.array): Action to execute within the environment
Returns:
4-tuple:
- (OrderedDict) observations from the environment
- (float) reward from the environment
- (bool) whether the current episode is completed or not
- (dict) misc information
Raises:
ValueError: [Steps past episode termination]
"""
if self.done:
raise ValueError("executing action in terminated episode")
self.timestep += 1
# Since the env.step frequency is slower than the mjsim timestep frequency, the internal controller will output
# multiple torque commands in between new high level action commands. Therefore, we need to denote via
# 'policy_step' whether the current step we're taking is simply an internal update of the controller,
# or an actual policy update
policy_step = True
# Loop through the simulation at the model timestep rate until we're ready to take the next policy step
# (as defined by the control frequency specified at the environment level)
for i in range(int(self.control_timestep / self.model_timestep)):
self.sim.forward()
self._pre_action(action, policy_step)
self.sim.step()
self._update_observables()
policy_step = False
# Note: this is done all at once to avoid floating point inaccuracies
self.cur_time += self.control_timestep
reward, done, info = self._post_action(action)
if self.viewer is not None and self.renderer != 'mujoco':
self.viewer.update()
observations = self.viewer._get_observations() if self.viewer_get_obs else self._get_observations()
return observations, reward, done, info
def _pre_action(self, action, policy_step=False):
"""
Do any preprocessing before taking an action.
Args:
action (np.array): Action to execute within the environment
policy_step (bool): Whether this current loop is an actual policy step or internal sim update step
"""
self.sim.data.ctrl[:] = action
def _post_action(self, action):
"""
Do any housekeeping after taking an action.
Args:
action (np.array): Action to execute within the environment
Returns:
3-tuple:
- (float) reward from the environment
- (bool) whether the current episode is completed or not
- (dict) empty dict to be filled with information by subclassed method
"""
reward = self.reward(action)
# done if number of elapsed timesteps is greater than horizon
self.done = (self.timestep >= self.horizon) and not self.ignore_done
return reward, self.done, {}
def reward(self, action):
"""
Reward should be a function of state and action
Args:
action (np.array): Action to execute within the environment
Returns:
float: Reward from environment
"""
raise NotImplementedError
def render(self):
"""
Renders to an on-screen window.
"""
self.viewer.render()
def get_pixel_obs(self):
"""
Gets the pixel observations for the environment from the specified renderer
"""
self.viewer.get_pixel_obs()
def close_renderer(self):
"""
Closes the renderer
"""
self.viewer.close()
def observation_spec(self):
"""
Returns an observation as observation specification.
An alternative design is to return an OrderedDict where the keys
are the observation names and the values are the shapes of observations.
We leave this alternative implementation commented out, as we find the
current design is easier to use in practice.
Returns:
OrderedDict: Observations from the environment
"""
observation = self.viewer._get_observations() if self.viewer_get_obs else self._get_observations()
return observation
def clear_objects(self, object_names):
"""
Clears objects with the name @object_names out of the task space. This is useful
for supporting task modes with single types of objects, as in
@self.single_object_mode without changing the model definition.
Args:
object_names (str or list of str): Name of object(s) to remove from the task workspace
"""
object_names = {object_names} if type(object_names) is str else set(object_names)
for obj in self.model.mujoco_objects:
if obj.name in object_names:
self.sim.data.set_joint_qpos(obj.joints[0], np.array((10, 10, 10, 1, 0, 0, 0)))
def visualize(self, vis_settings):
"""
Do any needed visualization here
Args:
vis_settings (dict): Visualization keywords mapped to T/F, determining whether that specific
component should be visualized. Should have "env" keyword as well as any other relevant
options specified.
"""
# Set visuals for environment objects
for obj in self.model.mujoco_objects:
obj.set_sites_visibility(sim=self.sim, visible=vis_settings["env"])
def set_camera_pos_quat(self, camera_pos, camera_quat):
if self.renderer in ["nvisii", "igibson"]:
self.viewer.set_camera_pos_quat(camera_pos, camera_quat)
else:
raise AttributeError('setting camera position and quat requires renderer to be either NVISII or iGibson.')
def reset_from_xml_string(self, xml_string):
"""
Reloads the environment from an XML description of the environment.
Args:
xml_string (str): Filepath to the xml file that will be loaded directly into the sim
"""
# if there is an active viewer window, destroy it
if self.renderer != 'nvisii':
self.close()
# Since we are reloading from an xml_string, we are deterministically resetting
self.deterministic_reset = True
# initialize sim from xml
self._initialize_sim(xml_string=xml_string)
# Now reset as normal
self.reset()
# Turn off deterministic reset
self.deterministic_reset = False
def check_contact(self, geoms_1, geoms_2=None):
"""
Finds contact between two geom groups.
Args:
geoms_1 (str or list of str or MujocoModel): an individual geom name or list of geom names or a model. If
a MujocoModel is specified, the geoms checked will be its contact_geoms
geoms_2 (str or list of str or MujocoModel or None): another individual geom name or list of geom names.
If a MujocoModel is specified, the geoms checked will be its contact_geoms. If None, will check
any collision with @geoms_1 to any other geom in the environment
Returns:
bool: True if any geom in @geoms_1 is in contact with any geom in @geoms_2.
"""
# Check if either geoms_1 or geoms_2 is a string, convert to list if so
if type(geoms_1) is str:
geoms_1 = [geoms_1]
elif isinstance(geoms_1, MujocoModel):
geoms_1 = geoms_1.contact_geoms
if type(geoms_2) is str:
geoms_2 = [geoms_2]
elif isinstance(geoms_2, MujocoModel):
geoms_2 = geoms_2.contact_geoms
for contact in self.sim.data.contact[: self.sim.data.ncon]:
# check contact geom in geoms
c1_in_g1 = self.sim.model.geom_id2name(contact.geom1) in geoms_1
c2_in_g2 = self.sim.model.geom_id2name(contact.geom2) in geoms_2 if geoms_2 is not None else True
# check contact geom in geoms (flipped)
c2_in_g1 = self.sim.model.geom_id2name(contact.geom2) in geoms_1
c1_in_g2 = self.sim.model.geom_id2name(contact.geom1) in geoms_2 if geoms_2 is not None else True
if (c1_in_g1 and c2_in_g2) or (c1_in_g2 and c2_in_g1):
return True
return False
def get_contacts(self, model):
"""
Checks for any contacts with @model (as defined by @model's contact_geoms) and returns the set of
geom names currently in contact with that model (excluding the geoms that are part of the model itself).
Args:
model (MujocoModel): Model to check contacts for.
Returns:
set: Unique geoms that are actively in contact with this model.
Raises:
AssertionError: [Invalid input type]
"""
# Make sure model is MujocoModel type
assert isinstance(model, MujocoModel), \
"Inputted model must be of type MujocoModel; got type {} instead!".format(type(model))
contact_set = set()
for contact in self.sim.data.contact[: self.sim.data.ncon]:
# check contact geom in geoms; add to contact set if match is found
g1, g2 = self.sim.model.geom_id2name(contact.geom1), self.sim.model.geom_id2name(contact.geom2)
if g1 in model.contact_geoms and g2 not in model.contact_geoms:
contact_set.add(g2)
elif g2 in model.contact_geoms and g1 not in model.contact_geoms:
contact_set.add(g1)
return contact_set
def add_observable(self, observable):
"""
Adds an observable to this environment.
Args:
observable (Observable): Observable instance.
"""
assert observable.name not in self._observables,\
"Observable name {} is already associated with an existing observable! Use modify_observable(...) " \
"to modify a pre-existing observable.".format(observable.name)
self._observables[observable.name] = observable
def modify_observable(self, observable_name, attribute, modifier):
"""
Modifies observable with associated name @observable_name, replacing the given @attribute with @modifier.
Args:
observable_name (str): Observable to modify
attribute (str): Observable attribute to modify.
Options are {`'sensor'`, `'corrupter'`,`'filter'`, `'delayer'`, `'sampling_rate'`,
`'enabled'`, `'active'`}
modifier (any): New function / value to replace with for observable. If a function, new signature should
match the function being replaced.
"""
# Find the observable
assert observable_name in self._observables, "No valid observable with name {} found. Options are: {}".\
format(observable_name, self.observation_names)
obs = self._observables[observable_name]
# replace attribute accordingly
if attribute == "sensor":
obs.set_sensor(modifier)
elif attribute == "corrupter":
obs.set_corrupter(modifier)
elif attribute == "filter":
obs.set_filter(modifier)
elif attribute == "delayer":
obs.set_delayer(modifier)
elif attribute == "sampling_rate":
obs.set_sampling_rate(modifier)
elif attribute == "enabled":
obs.set_enabled(modifier)
elif attribute == "active":
obs.set_active(modifier)
else:
# Invalid attribute specified
raise ValueError("Invalid observable attribute specified. Requested: {}, valid options are {}".
format(attribute, {"sensor", "corrupter", "filter", "delayer",
"sampling_rate", "enabled", "active"}))
def _check_success(self):
"""
Checks if the task has been completed. Should be implemented by subclasses
Returns:
bool: True if the task has been completed
"""
raise NotImplementedError
def _destroy_viewer(self):
"""
Destroys the current mujoco renderer instance if it exists
"""
# if there is an active viewer window, destroy it
if self.viewer is not None:
self.viewer.close() # change this to viewer.finish()?
self.viewer = None
def close(self):
"""Do any cleanup necessary here."""
self._destroy_viewer()
@property
def observation_modalities(self):
"""
Modalities for this environment's observations
Returns:
set: All observation modalities
"""
return set([observable.modality for observable in self._observables.values()])
@property
def observation_names(self):
"""
Grabs all names for this environment's observables
Returns:
set: All observation names
"""
return set(self._observables.keys())
@property
def enabled_observables(self):
"""
Grabs all names of enabled observables for this environment. An observable is considered enabled if its values
are being continually computed / updated at each simulation timestep.
Returns:
set: All enabled observation names
"""
return set([name for name, observable in self._observables.items() if observable.is_enabled()])
@property
def active_observables(self):
"""
Grabs all names of active observables for this environment. An observable is considered active if its value is
being returned in the observation dict from _get_observations() call or from the step() call (assuming this
observable is enabled).
Returns:
set: All active observation names
"""
return set([name for name, observable in self._observables.items() if observable.is_active()])
@property
def _visualizations(self):
"""
Visualization keywords for this environment
Returns:
set: All components that can be individually visualized for this environment
"""
return {"env"}
@property
def action_spec(self):
"""
Action specification should be implemented in subclasses.
Action space is represented by a tuple of (low, high), which are two numpy
vectors that specify the min/max action limits per dimension.
"""
raise NotImplementedError
@property
def action_dim(self):
"""
Size of the action space
Returns:
int: Action space dimension
"""
raise NotImplementedError
def test_sim_state():
model = load_model_from_xml(BASIC_MODEL_XML)
foo = 10
d = {"foo": foo,
"foo_array": np.array([foo, foo, foo]),
"foo_2darray": np.reshape(np.array([foo, foo, foo, foo]), (2, 2)),
}
def udd_callback(sim):
return d
sim = MjSim(model, nsubsteps=2, udd_callback=udd_callback)
state = sim.get_state()
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state.udd_state.keys():
if (isinstance(state.udd_state[k], Number)):
assert state.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state.udd_state[k], sim.udd_state[k])
# test flatten, unflatten
a = state.flatten()
assert len(a) == (1 + sim.model.nq + sim.model.nv + sim.model.na + 8)
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state2.udd_state.keys():
if (isinstance(state2.udd_state[k], Number)):
assert state2.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state2.udd_state[k], sim.udd_state[k])
assert state2 == state
assert not state2 != state
# test equality with deleting keys
state2 = state2._replace(udd_state={"foo": foo})
assert state2 != state
assert not (state2 == state)
# test equality with changing contents of array
state2 = state2._replace(
udd_state={"foo": foo, "foo_array": np.array([foo, foo + 1])})
assert state2 != state
assert not (state2 == state)
# test equality with adding keys
d2 = dict(d)
d2.update({"not_foo": foo})
state2 = state2._replace(udd_state=d2)
assert state2 != state
assert not (state2 == state)
# test defensive copy
sim.set_state(state)
state.qpos[0] = -1
assert not np.array_equal(state.qpos, sim.data.qpos)
state3 = sim.get_state()
state3.qpos[0] = -1
assert not np.array_equal(state3.qpos, sim.data.qpos)
state3.udd_state["foo_array"][0] = -1
assert not np.array_equal(
state3.udd_state["foo_array"], sim.udd_state["foo_array"])
# test no callback
sim = MjSim(model, nsubsteps=2)
state = sim.get_state()
print("state.udd_state = %s" % state.udd_state)
assert state.udd_state == {}
# test flatten, unflatten
a = state.flatten()
assert len(a) == 1 + sim.model.nq + sim.model.nv + sim.model.na
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
assert state.udd_state == sim.udd_state
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self,
env_name,
rand_seed,
maximum_length,
model_path,
frame_skip,
misc_info={}):
self._env_name = env_name
self._rand_seed = rand_seed
self._maximum_length = maximum_length
self._misc_info = misc_info
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
# Why is this here? Causes errors
#observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
#assert not done
#self.obs_dim = np.sum([o.size for o in observation]) if type(observation) is tuple else observation.size
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
# annoying should replace
high = np.inf * np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed(self._rand_seed)
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(self._rand_seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def get_env_state(self):
"""
Get full state of the environment beyond qpos and qvel
For example, if targets are defined using sites, this function should also
contain location of the sites (which are not included in qpos).
Must return a dictionary that can be used in the set_env_state function
"""
raise NotImplementedError
def set_env_state(self, state):
"""
Uses the state dictionary to set the state of the world
"""
raise NotImplementedError
# -----------------------------
def reset(self):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob, 0, False, {}
def reset_soft(self, seed=None):
return self._old_obs, 0, False, {}
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq, ) and qvel.shape == (
self.model.nv, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 0.5
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self):
return None
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t + 1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self,
policy,
horizon=1000,
num_episodes=1,
frame_size=(640, 480),
mode='exploration',
save_loc='./tmp/',
filename='newvid',
it=0,
camera_name=None):
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o, *_ = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy(o)
o, r, d, _ = self.step(a)
t = t + 1
curr_frame = self.sim.render(width=frame_size[0],
height=frame_size[1],
mode='offscreen',
camera_name=camera_name,
device_id=0)
arrs.append(curr_frame[::-1, :, :])
print(t, end=', ', flush=True)
file_name = save_loc + filename + str(ep) + str(it) + ".mp4"
if not os.path.exists(save_loc):
os.makedirs(save_loc)
imageio.mimwrite(file_name, np.asarray(arrs), fps=10.0)
print("saved", file_name)
t1 = timer.time()
print("time taken = %f" % (t1 - t0))
def test_sim_state():
model = load_model_from_xml(BASIC_MODEL_XML)
foo = 10
d = {"foo": foo,
"foo_array": np.array([foo, foo, foo]),
"foo_2darray": np.reshape(np.array([foo, foo, foo, foo]), (2, 2)),
}
def udd_callback(sim):
return d
sim = MjSim(model, nsubsteps=2, udd_callback=udd_callback)
state = sim.get_state()
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state.udd_state.keys():
if (isinstance(state.udd_state[k], Number)):
assert state.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state.udd_state[k], sim.udd_state[k])
# test flatten, unflatten
a = state.flatten()
assert len(a) == (1 + sim.model.nq + sim.model.nv + sim.model.na + 8)
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
for k in state2.udd_state.keys():
if (isinstance(state2.udd_state[k], Number)):
assert state2.udd_state[k] == sim.udd_state[k]
else:
assert np.array_equal(state2.udd_state[k], sim.udd_state[k])
assert state2 == state
assert not state2 != state
# test equality with deleting keys
state2 = state2._replace(udd_state={"foo": foo})
assert state2 != state
assert not (state2 == state)
# test equality with changing contents of array
state2 = state2._replace(
udd_state={"foo": foo, "foo_array": np.array([foo, foo + 1])})
assert state2 != state
assert not (state2 == state)
# test equality with adding keys
d2 = dict(d)
d2.update({"not_foo": foo})
state2 = state2._replace(udd_state=d2)
assert state2 != state
assert not (state2 == state)
# test defensive copy
sim.set_state(state)
state.qpos[0] = -1
assert not np.array_equal(state.qpos, sim.data.qpos)
state3 = sim.get_state()
state3.qpos[0] = -1
assert not np.array_equal(state3.qpos, sim.data.qpos)
state3.udd_state["foo_array"][0] = -1
assert not np.array_equal(
state3.udd_state["foo_array"], sim.udd_state["foo_array"])
# test no callback
sim = MjSim(model, nsubsteps=2)
state = sim.get_state()
print("state.udd_state = %s" % state.udd_state)
assert state.udd_state == {}
# test flatten, unflatten
a = state.flatten()
assert len(a) == 1 + sim.model.nq + sim.model.nv + sim.model.na
state2 = MjSimState.from_flattened(a, sim)
assert np.array_equal(state.time, sim.data.time)
assert np.array_equal(state.qpos, sim.data.qpos)
assert np.array_equal(state.qvel, sim.data.qvel)
assert np.array_equal(state.act, sim.data.act)
assert state.udd_state == sim.udd_state
def main(data_dir):
model = load_model_from_path("robot.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
initial_state = MjSimState(time=0,
qpos=np.array([
0, -np.pi / 4, 0, -3 * np.pi / 4 + 1, 0,
np.pi / 2, np.pi / 4
]),
qvel=np.zeros(7),
act=None,
udd_state={})
sim.set_state(initial_state)
sim.step()
traj_count = 0
control_state = None
while (traj_count < NUM_TRAJECTORIES and control_state != FINISHED):
control_state = ACCELERATING
outputFile = None
initial_q = sim.get_state()[q_INDEX]
velGen = randVelGen.RandVelGenerator()
qd_des = velGen.generatePatternVel()
coming_back_time = 0.0
time = 0
while control_state != FINISHED:
state = sim.get_state()
q = state[q_INDEX]
qd = state[qd_INDEX]
boundViolations = bounds.getBoundViolations(q)
# RD =
TB = bounds.tableBoundViolation(sim)
OB = bounds.outOfBounds(q)
DA = helperFun.moving(qd)
DC = helperFun.stopped(qd)
DD = DC
DB = coming_back_time > RETURN_TIME
FN = traj_count >= NUM_TRAJECTORIES
prev_state = control_state
# transition block
if control_state == ACCELERATING:
if not TB and not OB and not DA:
control_state = ACCELERATING
elif TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0.0
elif not TB and OB:
control_state = DAMPING
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif not TB and not OB and DA:
control_state = COASTING
traj_count += 1
outputFile = open(data_dir +
helperFun.getUniqueFileName("traj"),
mode='x')
outputWriter = csv.writer(outputFile, delimiter=',')
print_count(traj_count)
else:
control_state = FINISHED
print("Unknown transistion! ACCELERATING")
elif control_state == COASTING:
if not FN and not TB and not OB and DC:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
outputFile.close()
elif not FN and TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0
outputFile.close()
elif not FN and not TB and OB:
control_state = DAMPING
outputFile.close()
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif FN:
control_state = FINISHED
outputFile.close()
elif not FN and not TB and not OB and not DC:
control_state = COASTING
else:
control_state = FINISHED
print("Unknown transition! COASTING")
outputFile.close()
elif control_state == DAMPING:
if not TB and not DD:
control_state = DAMPING
elif TB:
control_state = COMING_BACK_IN_BOUNDS
coming_back_time = 0.0
elif not TB and DD:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
else:
control_state = FINISHED
print("Unknow transition! DAMPING")
elif control_state == COMING_BACK_IN_BOUNDS:
if not DB:
control_state = COMING_BACK_IN_BOUNDS
elif DB and OB:
control_state = DAMPING
curBoundViolations = bounds.getBoundViolations(q)
velGen.setJointDirections(curBoundViolations)
elif DB and not OB:
control_state = ACCELERATING
qd_des = velGen.generatePatternVel()
else:
control_state = FINISHED
print("Unknown transition! COMING_BACK_IN_BOUNDS")
elif control_state == FINISHED:
control_state = FINISHED
else:
control_state = FINISHED
print("Got to an invalid state!")
# debug states
if prev_state != control_state:
if control_state == ACCELERATING:
print("ACCELERATING")
elif control_state == COASTING:
print("COASTING")
elif control_state == DAMPING:
print("DAMPING")
elif control_state == COMING_BACK_IN_BOUNDS:
print("COMING_BACK_IN_BOUNDS")
elif control_state == "FINISHED":
print("FINISHED")
else:
print("In a bad state!")
torques = np.zeros(7)
if control_state == ACCELERATING:
torques = controllers.basicVelControl(qd_des=qd_des, qd_cur=qd)
elif control_state == COASTING:
data = np.concatenate(
(q, qd, data_calc.get_3D_data(sim), [time]))
outputWriter.writerow(data)
torques = controllers.basicVelControl(qd_des=qd_des, qd_cur=qd)
elif control_state == DAMPING:
torques = controllers.dampingControl(qd)
elif control_state == COMING_BACK_IN_BOUNDS:
coming_back_time += TIMESTEP
torques = controllers.moveAwayFromTable(q=q, qd=qd)
elif control_state == FINISHED:
outputFile.close()
break
else:
print("Got to an invalid state!")
control_state = FINISHED
break
sim.data.ctrl[:] = torques
sim.step()
viewer.render()
time += TIMESTEP
class MujocoEnv(metaclass=EnvMeta):
"""Initializes a Mujoco Environment."""
def __init__(
self,
has_renderer=False,
has_offscreen_renderer=True,
render_collision_mesh=False,
render_visual_mesh=True,
control_freq=10,
horizon=1000,
ignore_done=False,
use_camera_obs=False,
camera_name="frontview",
camera_height=256,
camera_width=256,
camera_depth=False,
):
"""
Args:
has_renderer (bool): If true, render the simulation state in
a viewer instead of headless mode.
has_offscreen_renderer (bool): True if using off-screen rendering.
render_collision_mesh (bool): True if rendering collision meshes
in camera. False otherwise.
render_visual_mesh (bool): True if rendering visual meshes
in camera. False otherwise.
control_freq (float): how many control signals to receive
in every simulated second. This sets the amount of simulation time
that passes between every action input.
horizon (int): Every episode lasts for exactly @horizon timesteps.
ignore_done (bool): True if never terminating the environment (ignore @horizon).
use_camera_obs (bool): if True, every observation includes a
rendered image.
camera_name (str): name of camera to be rendered. Must be
set if @use_camera_obs is True.
camera_height (int): height of camera frame.
camera_width (int): width of camera frame.
camera_depth (bool): True if rendering RGB-D, and RGB otherwise.
"""
self.has_renderer = has_renderer
self.has_offscreen_renderer = has_offscreen_renderer
self.render_collision_mesh = render_collision_mesh
self.render_visual_mesh = render_visual_mesh
self.control_freq = control_freq
self.horizon = horizon
self.ignore_done = ignore_done
self.viewer = None
self.model = None
# settings for camera observations
self.use_camera_obs = use_camera_obs
if self.use_camera_obs and not self.has_offscreen_renderer:
raise ValueError("Camera observations require an offscreen renderer.")
self.camera_name = camera_name
if self.use_camera_obs and self.camera_name is None:
raise ValueError("Must specify camera name when using camera obs")
self.camera_height = camera_height
self.camera_width = camera_width
self.camera_depth = camera_depth
self._reset_internal()
def initialize_time(self, control_freq):
"""
Initializes the time constants used for simulation.
"""
self.cur_time = 0
self.model_timestep = self.sim.model.opt.timestep
if self.model_timestep <= 0:
raise XMLError("xml model defined non-positive time step")
self.control_freq = control_freq
if control_freq <= 0:
raise SimulationError(
"control frequency {} is invalid".format(control_freq)
)
self.control_timestep = 1. / control_freq
def _load_model(self):
"""Loads an xml model, puts it in self.model"""
pass
def _get_reference(self):
"""
Sets up references to important components. A reference is typically an
index or a list of indices that point to the corresponding elements
in a flatten array, which is how MuJoCo stores physical simulation data.
"""
pass
def reset(self):
"""Resets simulation."""
# TODO(yukez): investigate black screen of death
# if there is an active viewer window, destroy it
self._destroy_viewer()
self._reset_internal()
self.sim.forward()
return self._get_observation()
def _reset_internal(self):
"""Resets simulation internal configurations."""
# instantiate simulation from MJCF model
self._load_model()
self.mjpy_model = self.model.get_model(mode="mujoco_py")
self.sim = MjSim(self.mjpy_model)
self.initialize_time(self.control_freq)
# create visualization screen or renderer
if self.has_renderer and self.viewer is None:
self.viewer = MujocoPyRenderer(self.sim)
self.viewer.viewer.vopt.geomgroup[0] = (
1 if self.render_collision_mesh else 0
)
self.viewer.viewer.vopt.geomgroup[1] = 1 if self.render_visual_mesh else 0
# hiding the overlay speeds up rendering significantly
self.viewer.viewer._hide_overlay = True
elif self.has_offscreen_renderer:
if self.sim._render_context_offscreen is None:
render_context = MjRenderContextOffscreen(self.sim)
self.sim.add_render_context(render_context)
self.sim._render_context_offscreen.vopt.geomgroup[0] = (
1 if self.render_collision_mesh else 0
)
self.sim._render_context_offscreen.vopt.geomgroup[1] = (
1 if self.render_visual_mesh else 0
)
# additional housekeeping
self.sim_state_initial = self.sim.get_state()
self._get_reference()
self.cur_time = 0
self.timestep = 0
self.done = False
def _get_observation(self):
"""Returns an OrderedDict containing observations [(name_string, np.array), ...]."""
return OrderedDict()
def step(self, action):
"""Takes a step in simulation with control command @action."""
if self.done:
raise ValueError("executing action in terminated episode")
self.timestep += 1
self._pre_action(action)
end_time = self.cur_time + self.control_timestep
while self.cur_time < end_time:
self.sim.step()
self.cur_time += self.model_timestep
reward, done, info = self._post_action(action)
return self._get_observation(), reward, done, info
def _pre_action(self, action):
"""Do any preprocessing before taking an action."""
self.sim.data.ctrl[:] = action
def _post_action(self, action):
"""Do any housekeeping after taking an action."""
reward = self.reward(action)
# done if number of elapsed timesteps is greater than horizon
self.done = (self.timestep >= self.horizon) and not self.ignore_done
return reward, self.done, {}
def reward(self, action):
"""Reward should be a function of state and action."""
return 0
def render(self):
"""
Renders to an on-screen window.
"""
self.viewer.render()
def observation_spec(self):
"""
Returns an observation as observation specification.
An alternative design is to return an OrderedDict where the keys
are the observation names and the values are the shapes of observations.
We leave this alternative implementation commented out, as we find the
current design is easier to use in practice.
"""
observation = self._get_observation()
return observation
# observation_spec = OrderedDict()
# for k, v in observation.items():
# observation_spec[k] = v.shape
# return observation_spec
def action_spec(self):
"""
Action specification should be implemented in subclasses.
Action space is represented by a tuple of (low, high), which are two numpy
vectors that specify the min/max action limits per dimension.
"""
raise NotImplementedError
def reset_from_xml_string(self, xml_string):
"""Reloads the environment from an XML description of the environment."""
# if there is an active viewer window, destroy it
self.close()
# load model from xml
self.mjpy_model = load_model_from_xml(xml_string)
self.sim = MjSim(self.mjpy_model)
self.initialize_time(self.control_freq)
if self.has_renderer and self.viewer is None:
self.viewer = MujocoPyRenderer(self.sim)
self.viewer.viewer.vopt.geomgroup[0] = (
1 if self.render_collision_mesh else 0
)
self.viewer.viewer.vopt.geomgroup[1] = 1 if self.render_visual_mesh else 0
# hiding the overlay speeds up rendering significantly
self.viewer.viewer._hide_overlay = True
elif self.has_offscreen_renderer:
render_context = MjRenderContextOffscreen(self.sim)
render_context.vopt.geomgroup[0] = 1 if self.render_collision_mesh else 0
render_context.vopt.geomgroup[1] = 1 if self.render_visual_mesh else 0
self.sim.add_render_context(render_context)
self.sim_state_initial = self.sim.get_state()
self._get_reference()
self.cur_time = 0
self.timestep = 0
self.done = False
# necessary to refresh MjData
self.sim.forward()
def find_contacts(self, geoms_1, geoms_2):
"""
Finds contact between two geom groups.
Args:
geoms_1: a list of geom names (string)
geoms_2: another list of geom names (string)
Returns:
iterator of all contacts between @geoms_1 and @geoms_2
"""
for contact in self.sim.data.contact[0 : self.sim.data.ncon]:
# check contact geom in geoms
c1_in_g1 = self.sim.model.geom_id2name(contact.geom1) in geoms_1
c2_in_g2 = self.sim.model.geom_id2name(contact.geom2) in geoms_2
# check contact geom in geoms (flipped)
c2_in_g1 = self.sim.model.geom_id2name(contact.geom2) in geoms_1
c1_in_g2 = self.sim.model.geom_id2name(contact.geom1) in geoms_2
if (c1_in_g1 and c2_in_g2) or (c1_in_g2 and c2_in_g1):
yield contact
def _check_contact(self):
"""Returns True if gripper is in contact with an object."""
return False
def _check_success(self):
"""
Returns True if task has been completed.
"""
return False
def _destroy_viewer(self):
# if there is an active viewer window, destroy it
if self.viewer is not None:
self.viewer.close() # change this to viewer.finish()?
self.viewer = None
def close(self):
"""Do any cleanup necessary here."""
self._destroy_viewer()
class MujocoEnv(gym.Env):
def __init__(self,
model_path,
frame_skip=1,
action_noise=0.0,
random_init_state=True):
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.viewer = None
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
self.init_qacc = self.data.qacc.ravel().copy()
self.init_ctrl = self.data.ctrl.ravel().copy()
self.qpos_dim = self.init_qpos.size
self.qvel_dim = self.init_qvel.size
self.ctrl_dim = self.init_ctrl.size
self.action_noise = action_noise
self.random_init_state = random_init_state
"""
if "init_qpos" in self.model.numeric_names:
init_qpos_id = self.model.numeric_names.index("init_qpos")
addr = self.model.numeric_adr.flat[init_qpos_id]
size = self.model.numeric_size.flat[init_qpos_id]
init_qpos = self.model.numeric_data.flat[addr:addr + size]
self.init_qpos = init_qpos
"""
self.dcom = None
self.current_com = None
self.reset()
super(MujocoEnv, self).__init__()
@property
def action_space(self):
bounds = self.model.actuator_ctrlrange.copy()
lb = bounds[:, 0]
ub = bounds[:, 1]
return spaces.Box(lb, ub)
@property
def observation_space(self):
shp = self.get_current_obs().shape
ub = BIG * np.ones(shp)
return spaces.Box(ub * -1, ub)
@property
def action_bounds(self):
return self.action_space.low, self.action_space.high
def reset_mujoco(self, init_state=None):
if init_state is None:
if self.random_init_state:
qp = self.init_qpos.copy() + \
np.random.normal(size=self.init_qpos.shape) * 0.01
qv = self.init_qvel.copy() + \
np.random.normal(size=self.init_qvel.shape) * 0.1
else:
qp = self.init_qpos.copy()
qv = self.init_qvel.copy()
qacc = self.init_qacc.copy()
ctrl = self.init_ctrl.copy()
else:
pass
"""
start = 0
for datum_name in ["qpos", "qvel", "qacc", "ctrl"]:
datum = getattr(self.data, datum_name)
datum_dim = datum.shape[0]
datum = init_state[start: start + datum_dim]
setattr(self.model.data, datum_name, datum)
start += datum_dim
"""
self.set_state(qp, qv)
def reset(self, init_state=None):
# self.reset_mujoco(init_state)
self.sim.reset()
self.sim.forward()
self.current_com = self.data.subtree_com[0]
self.dcom = np.zeros_like(self.current_com)
return self.get_current_obs()
def set_state(self, qpos, qvel, qacc):
assert qpos.shape == (self.qpos_dim, ) and qvel.shape == (
self.qvel_dim, ) and qacc.shape == (self.qacc_dim, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
def get_current_obs(self):
return self._get_full_obs()
def _get_full_obs(self):
data = self.data
cdists = np.copy(self.model.geom_margin).flat
for c in self.model.data.contact:
cdists[c.geom2] = min(cdists[c.geom2], c.dist)
obs = np.concatenate([
data.qpos.flat,
data.qvel.flat,
# data.cdof.flat,
data.cinert.flat,
data.cvel.flat,
# data.cacc.flat,
data.qfrc_actuator.flat,
data.cfrc_ext.flat,
data.qfrc_constraint.flat,
cdists,
# data.qfrc_bias.flat,
# data.qfrc_passive.flat,
self.dcom.flat,
])
return obs
@property
def _state(self):
return np.concatenate([self.data.qpos.flat, self.data.qvel.flat])
@property
def _full_state(self):
return np.concatenate([
self.data.qpos,
self.data.qvel,
self.data.qacc,
self.data.ctrl,
]).ravel()
def inject_action_noise(self, action):
# generate action noise
noise = self.action_noise * \
np.random.normal(size=action.shape)
# rescale the noise to make it proportional to the action bounds
lb, ub = self.action_bounds
noise = 0.5 * (ub - lb) * noise
return action + noise
def forward_dynamics(self, action):
ctrl = self.inject_action_noise(action)
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(self.frame_skip):
self.sim.step()
new_com = self.data.subtree_com[0]
self.dcom = new_com - self.current_com
self.current_com = new_com
def get_viewer(self, config=None):
if self.viewer is None:
self.viewer = MjViewer(self.sim)
# self.viewer.start()
# self.viewer.set_model(self.model)
if config is not None:
pass
# self.viewer.set_window_pose(config["xpos"], config["ypos"])
# self.viewer.set_window_size(config["width"], config["height"])
# self.viewer.set_window_title(config["title"])
return self.viewer
def render(self, close=False, mode='human', config=None):
if mode == 'human':
# viewer = self.get_viewer(config=config)
try:
self.viewer.render()
except:
self.get_viewer(config=config)
self.viewer.render()
elif mode == 'rgb_array':
viewer = self.get_viewer(config=config)
viewer.loop_once()
# self.get_viewer(config=config).render()
data, width, height = self.get_viewer(config=config).get_image()
return np.fromstring(data,
dtype='uint8').reshape(height, width,
3)[::-1, :, :]
if close:
self.stop_viewer()
# def start_viewer(self):
# viewer = self.get_viewer()
# if not viewer.running:
# viewer.start()
#
# def stop_viewer(self):
# if self.viewer:
# self.viewer.finish()
# self.viewer = None
# def release(self):
# # temporarily alleviate the issue (but still some leak)
# from learning_to_adapt.mujoco_py.mjlib import mjlib
# mjlib.mj_deleteModel(self.model._wrapped)
# mjlib.mj_deleteData(self.data._wrapped)
def get_body_xmat(self, body_name):
idx = self.model.body_names.index(body_name)
return self.data.ximat[idx].reshape((3, 3))
def get_body_com(self, body_name):
return self.data.get_body_xpos(body_name)
def get_body_comvel(self, body_name):
idx = self.model.body_names.index(body_name)
## _compute_subtree
body_vels = np.zeros((self.model.nbody, 6))
# bodywise quantities
mass = self.model.body_mass.flatten()
for i in range(self.model.nbody):
# body velocity
# Compute object 6D velocity in object-centered frame, world/local orientation.
# mj_objectVelocity(const mjModel* m, const mjData* d, int objtype, int objid, mjtMum* res, int flg_local)
mujoco_py.cymj._mj_objectVelocity(self.model, self.data, 1, i,
body_vels[i], 0)
lin_moms = body_vels[:, 3:] * mass.reshape((-1, 1))
# init subtree mass
body_parentid = self.model.body_parentid
# subtree com and com_vel
for i in range(self.model.nbody - 1, -1, -1):
if i > 0:
parent = body_parentid[i]
# add scaled velocities
lin_moms[parent] += lin_moms[i]
# accumulate mass
mass[parent] += mass[i]
return_ = lin_moms / mass.reshape((-1, 1))
return return_[idx]
# return self.model.body_comvels[idx]
# def get_body_comvel(self, body_name):
# idx = self.model.body_names.index(body_name)
#
# return self.model.body_comvels[idx]
# def print_stats(self):
# super(MujocoEnv, self).print_stats()
# print("qpos dim:\t%d" % len(self.data.qpos))
def action_from_key(self, key):
raise NotImplementedError
# def set_state_tmp(self, state, restore=True):
# if restore:
# prev_pos = self.data.qpos
# prev_qvel = self.data.qvel
# prev_ctrl = self.data.ctrl
# prev_act = self.data.act
# qpos, qvel = self.decode_state(state)
# self.model.data.qpos = qpos
# self.model.data.qvel = qvel
# self.model.forward()
# yield
# if restore:
# self.data.qpos = prev_pos
# self.data.qvel = prev_qvel
# self.data.ctrl = prev_ctrl
# self.data.act = prev_act
# self.model.forward()
def get_param_values(self):
return {}
def set_param_values(self, values):
pass
class BaseMujocoHexRobot(HexRobot):
"""The hexapod robot in mujoco. Child classes need to define the joint names."""
@classmethod
@abc.abstractproperty
def joint_names(cls) -> Tuple[str, ...]:
"""The names of the joints in the mujoco xml."""
raise NotImplementedError
def __init__(self, load_path: str, viewer: bool = True):
"""Initialize a hex robot in mujoco.
Parameters
---------
load_path : str
Path to the xml file.
viewer : bool
Flag to create a MjViewer for the robot. By default a viewer will be created.
"""
model = load_model_from_path(load_path)
self._sim = MjSim(model)
self.num_joints = len(self.joint_names)
self._joint_qpos_ids = [
self._sim.model.get_joint_qpos_addr(x) for x in self.joint_names
]
self._joint_qvel_ids = [
self._sim.model.get_joint_qvel_addr(x) for x in self.joint_names
]
self._joint_actuator_id_map = dict(
zip(self.joint_names, range(self.num_joints)))
if viewer:
self._viewer = MjViewer(self._sim)
else:
self._viewer = None
def get_state(self) -> HexState:
"""Retrieve the current state of the robot.
Returns
-------
HexState
The current state of the robot.
"""
sim_state = self._sim.get_state()
joint_pos = sim_state.qpos[self._joint_qpos_ids]
joint_vel = sim_state.qvel[self._joint_qvel_ids]
return HexState(
qpos=OrderedDict(zip(self.joint_names, joint_pos)),
qvel=OrderedDict(zip(self.joint_names, joint_vel)),
acceleration=np.zeros(3),
) # TODO get the acceleration.
def set_joint_positions(self, joints: Dict[str, float]) -> None:
"""Sets the joint positions to the specified values
Parameters
----------
joints : Dict[str, float]
A mapping between the joint name and its value to be set.
"""
sim_state = self._sim.get_state()
for name, value in joints.items():
joint_id = self._sim.model.get_joint_qpos_addr(name)
sim_state.qpos[joint_id] = value
self._sim.set_state(sim_state)
self._sim.forward()
def step(self) -> None:
"""Steps the simulation forward by one step.
Updates the visualizer if one is available.
"""
self._sim.step()
if self._viewer is not None:
self._viewer.render()
def set_command(self, command: Dict[str, float]) -> None:
"""Set the command of the robot.
Parameters
----------
command : Dict[str, float]
The commands to the robot.
"""
for name, value in command.items():
self._sim.data.ctrl[self._joint_actuator_id_map[name]] = value
class DeterministicGraspPolicy(Policy):
def __init__(self, agentparams, policyparams):
Policy.__init__(self)
self.agentparams = agentparams
self.min_lift = agentparams.get('min_z_lift', 0.05)
self.policyparams = policyparams
self.adim = agentparams['adim']
self.n_actions = policyparams['nactions']
if 'num_samples' in self.policyparams:
self.M = self.policyparams['num_samples']
else:
self.M = 20 # number of CEM Samples
if 'best_to_take' in self.policyparams:
self.K = self.policyparams['best_to_take']
else:
self.K = 5 # best samples to average for next sampling
assert self.adim >= 4, 'must have at least x, y, z + gripper actions'
self.moveto = True
self.drop = False
self.grasp = False
self.lift = False
if 'iterations' in self.policyparams:
self.niter = self.policyparams['iterations']
else:
self.niter = 10 # number of iterations
self.imgs = []
self.iter = 0
def setup_CEM_model(self, t, init_model):
if t == 0:
if 'gen_xml' in self.agentparams:
self.CEM_model = MjSim(
load_model_from_path(self.agentparams['gen_xml_fname']))
else:
self.CEM_model = MjSim(
load_model_from_path(self.agentparams['filename']))
self.initial_qpos = init_model.data.qpos.copy()
self.initial_qvel = init_model.data.qvel.copy()
self.reset_CEM_model()
def reset_CEM_model(self):
if len(self.imgs) > 0:
print('saving iter', self.iter, 'with frames:', len(self.imgs))
npy_to_gif(
self.imgs,
os.path.join(self.agentparams['record'],
'iter_{}'.format(self.iter)))
self.iter += 1
sim_state = self.CEM_model.get_state()
sim_state.qpos[:] = self.initial_qpos.copy()
sim_state.qvel[:] = self.initial_qvel.copy()
self.CEM_model.set_state(sim_state)
self.prev_target = self.CEM_model.data.qpos[:self.adim].squeeze().copy(
)
self.target = self.CEM_model.data.qpos[:self.adim].squeeze().copy()
for _ in range(5):
self.step_model(self.target)
self.imgs = []
def viewer_refresh(self):
if 'debug_viewer' in self.policyparams and self.policyparams[
'debug_viewer']:
large_img = self.CEM_model.render(
640, 480, camera_name="maincam")[::-1, :, :]
self.imgs.append(large_img)
def perform_CEM(self, targetxy):
self.reset_CEM_model()
if 'object_meshes' in self.agentparams:
targetxy = self.CEM_model.data.sensordata[:2].squeeze().copy()
print('Beginning CEM')
ang_dis_mean = self.policyparams['init_mean'].copy()
ang_dis_cov = self.policyparams['init_cov'].copy()
scores = np.zeros(self.M)
best_score, best_ang, best_xy = -1, None, None
for n in range(self.niter):
ang_disp_samps = np.random.multivariate_normal(ang_dis_mean,
ang_dis_cov,
size=self.M)
for s in range(self.M):
#print('On iter', n, 'sample', s)
self.reset_CEM_model()
move = True
drop = False
grasp = False
g_start = 0
lift = False
angle_delta = ang_disp_samps[s, 0]
targetxy_delta = targetxy + ang_disp_samps[s, 1:]
print('init iter')
print(targetxy)
print(angle_delta, targetxy_delta)
for t in range(self.n_actions):
angle_action = np.zeros(self.adim)
cur_xy = self.CEM_model.data.qpos[:2].squeeze()
if move and np.linalg.norm(
targetxy_delta - cur_xy,
2) <= self.policyparams['drop_thresh']:
move = False
drop = True
if drop and self.CEM_model.data.qpos[2] <= -0.079:
drop = False
grasp = True
g_start = t
if grasp and t - g_start > 2:
grasp = False
lift = True
if move:
angle_action[:2] = targetxy_delta
angle_action[2] = self.agentparams['ztarget']
angle_action[3] = angle_delta
angle_action[4] = -100
elif drop:
angle_action[:2] = targetxy_delta
angle_action[2] = -0.08
angle_action[3] = angle_delta
angle_action[4] = -100
elif grasp:
angle_action[:2] = targetxy_delta
angle_action[2] = -0.08
angle_action[3] = angle_delta
angle_action[4] = 21
elif lift:
angle_action[:2] = targetxy_delta
angle_action[2] = self.agentparams['ztarget']
angle_action[3] = angle_delta
angle_action[4] = 21
self.step_model(angle_action)
# print 'final z', self.CEM_model.data.qpos[8].squeeze(), 'with angle', angle_samps[s]
if 'object_meshes' in self.agentparams:
obj_z = self.CEM_model.data.sensordata[2].squeeze()
else:
obj_z = self.CEM_model.data.qpos[8].squeeze()
print('obj_z at iter', n * self.M + s, 'is', obj_z)
scores[s] = obj_z
if 'stop_iter_thresh' in self.policyparams and scores[
s] > self.policyparams['stop_iter_thresh']:
return ang_disp_samps[s, 0], ang_disp_samps[s, 1:]
# print 'score',scores[s]
best_scores = np.argsort(-scores)[:self.K]
if scores[best_scores[0]] > best_score or best_ang is None:
#print('best', scores[best_scores[0]])
best_score = scores[best_scores[0]]
best_ang = ang_disp_samps[best_scores[0], 0]
best_xy = ang_disp_samps[best_scores[0], 1:]
ang_dis_mean = np.mean(ang_disp_samps[best_scores, :], axis=0)
ang_dis_cov = np.cov(ang_disp_samps[best_scores, :].T)
return best_ang, best_xy
def step_model(self, input_actions):
pos_clip = self.agentparams['targetpos_clip']
self.prev_target = self.target.copy()
self.target = input_actions.copy()
self.target = np.clip(self.target, pos_clip[0], pos_clip[1])
for s in range(self.agentparams['substeps']):
step_action = s / float(self.agentparams['substeps']) * (
self.target - self.prev_target) + self.prev_target
self.CEM_model.data.ctrl[:] = step_action
self.CEM_model.step()
self.viewer_refresh()
#print "end", self.CEM_model.data.qpos[:4].squeeze()
def act(self,
traj,
t,
init_model=None,
goal_object_pose=None,
hyperparams=None,
goal_image=None):
"""
Scripted pick->place->wiggle trajectory. There's probably a better way to script this
but booleans will suffice for now.
"""
self.setup_CEM_model(t, init_model)
if t == 0:
self.moveto = True
self.drop = False
self.lift = False
self.grasp = False
self.second_moveto = False
self.final_drop = False
self.wiggle = False
self.switchTime = 0
print('start pose', traj.Object_pose[t, 0, :3])
self.targetxy = traj.Object_pose[t, 0, :2]
self.angle, self.disp = self.perform_CEM(self.targetxy)
print('best angle', self.angle, 'best target', self.targetxy)
self.targetxy += self.disp
traj.desig_pos = np.zeros((2, 2))
traj.desig_pos[0] = self.targetxy.copy()
if self.lift and traj.X_full[t, 2] >= self.min_lift:
self.lift = False
if traj.Object_full_pose[t, 0, 2] > -0.01: #lift occursed
self.second_moveto = True
self.targetxy = np.random.uniform(-0.2, 0.2, size=2)
print("LIFTED OBJECT!")
print('dropping at', self.targetxy)
traj.desig_pos[1] = self.targetxy.copy()
else:
self.wiggle = True
if self.grasp and self.switchTime > 0:
print('lifting at time', t, '!', 'have z', traj.X_full[t, 2])
self.grasp = False
self.lift = True
if self.drop and (traj.X_full[t, 2] <= -0.079 or self.switchTime >= 2):
print('grasping at time', t, '!', 'have z', traj.X_full[t, 2])
self.drop = False
self.grasp = True
self.switchTime = 0
if self.moveto and (np.linalg.norm(traj.X_full[t, :2] - self.targetxy,
2) <=
self.policyparams['drop_thresh']):
if self.switchTime > 0:
print('stopping moveto at time', t, '!')
print(traj.X_full[t, :2], self.targetxy)
self.moveto = False
self.drop = True
self.switchTime = 0
else:
self.switchTime += 1
if self.second_moveto and np.linalg.norm(
traj.X_full[t, :2] - self.targetxy,
2) <= self.policyparams['drop_thresh']:
self.second_moveto = False
self.final_drop = True
self.switchTime = 0
actions = np.zeros(self.adim)
if self.moveto or self.second_moveto:
delta = np.zeros(3)
delta[:2] = self.targetxy - traj.target_qpos[t, :2]
if 'xyz_std' in self.policyparams:
delta += self.policyparams['xyz_std'] * np.random.normal(
size=3)
norm = np.sqrt(np.sum(np.square(delta)))
if norm > self.policyparams['max_norm']:
delta *= self.policyparams['max_norm'] / norm
actions[:3] = traj.target_qpos[t, :3] + delta
actions[2] = self.agentparams['ztarget']
actions[3] = self.angle
if self.moveto:
actions[-1] = -1
else:
actions[-1] = 1
self.switchTime += 1
elif self.drop:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
elif self.lift:
actions[:2] = self.targetxy
actions[2] = self.agentparams['ztarget']
actions[3] = self.angle
actions[-1] = 1
elif self.grasp:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = 1
self.switchTime += 1
elif self.final_drop:
if self.switchTime > 0:
print('opening')
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
if self.switchTime > 1:
print('up')
actions[:2] = self.targetxy
actions[2] = self.agentparams['ztarget'] + np.random.uniform(
-0.03, 0.05)
actions[3] = self.angle + np.random.uniform(
-np.pi / 4., np.pi / 4.)
actions[-1] = -1
self.final_drop = False
self.wiggle = True
self.switchTime = 0
else:
actions[:2] = self.targetxy
actions[2] = -0.08
actions[3] = self.angle
actions[-1] = -1
self.switchTime += 1
elif self.wiggle:
delta_vec = np.random.normal(size=2)
norm = np.sqrt(np.sum(np.square(delta_vec)))
if norm > self.policyparams['max_norm']:
delta_vec *= self.policyparams['max_norm'] / norm
actions[:2] = np.clip(traj.target_qpos[t, :2] + delta_vec, -0.15,
0.15)
delta_z = np.random.uniform(-0.08 - traj.target_qpos[t, 2],
0.3 - traj.target_qpos[t, 2])
actions[2] = traj.target_qpos[t, 2] + delta_z
actions[3] = traj.target_qpos[t, 3] + np.random.uniform(-0.1, 0.1)
if np.random.uniform() > 0.5:
actions[4] = -1
else:
actions[4] = 1
if 'angle_std' in self.policyparams:
actions[3] += self.policyparams['angle_std'] * np.random.normal()
return actions - traj.target_qpos[t, :] * traj.mask_rel
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self, model_path, frame_skip=1, xml_string=""):
"""
@param model_path path of the default model
@param xml_string if given, the model will be reset using these values
"""
fullpath = os.path.join(os.path.dirname(__file__), "assets",
model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.model = load_model_from_path(fullpath)
with open(fullpath, 'r') as f:
self.model_xml = f.read()
self.default_xml = self.model_xml
if xml_string != "":
self.model = load_model_from_xml(xml_string)
self.model_xml = xml_string
self.frame_skip = frame_skip
self.sim = MjSim(self.model)
self.data = self.sim.data
self.viewer = None
self._viewers = {}
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self.step(np.zeros(self.model.nu))
assert not done
self.obs_dim = np.sum([
o.size for o in observation
]) if type(observation) is tuple else observation.size
high = np.inf * np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
self.set_param_space()
def get_params(self):
"""
Returns a dict of (param_name, param_value)
"""
return MujocoUpdater(self.model_xml).get_params()
def set_params(self, params):
"""
@param params: dict(param_name, param_value)
param_name should be a string of bodyname__type__paramname
where type is either geom or joint,
e.g. thigh__joint__friction,
and param_value is a numpy array
"""
# invalidate cached properties
self.__dict__.pop('action_space', None)
self.__dict__.pop('observation_space', None)
new_xml = MujocoUpdater.set_params(self.model_xml, params)
self.__init__(xml_string=new_xml)
self.reset()
return self
def set_param_space(self, param_space=None, eps_scale=0.5, replace=True):
"""
Set param_space
@param param_space: dict(string, gym.space.base.Space)
@param eps_scale: scale of variation applied to all params
@param replace: if true, param_space overwrites default param_space.
Default behavior is to merge.
"""
if param_space is not None:
if replace:
self._param_space = param_space
else:
self._param_space = {**self._param_space, **param_space}
else:
params = MujocoUpdater(self.model_xml).get_params()
self._param_space = dict()
for param, value in params.items():
eps = np.abs(value) * eps_scale
ub = value + eps
lb = value - eps
for name in positive_params:
if name in param:
lb = np.clip(lb, 1e-3, ub)
break
space = spaces.Box(lb, ub)
self._param_space[param] = space
def get_geom_params(self, body_name):
geom = MujocoUpdater(self.model_xml).get_geom(body_name)
return {
k: v
for k, v in geom.attrib.items()
if k not in MujocoUpdater.ignore_params
}
def get_joint_params(self, body_name):
joint = MujocoUpdater(self.model_xml).get_joint(body_name)
return {
k: v
for k, v in joint.attrib.items()
if k not in MujocoUpdater.ignore_params
}
def get_body_names(self):
return MujocoUpdater(self.model_xml).get_body_names()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
def get_current_obs(self):
return self._get_full_obs()
def _get_full_obs(self):
data = self.sim.data
cdists = np.copy(self.model.geom_margin).flat
for c in self.sim.data.contact:
cdists[c.geom2] = min(cdists[c.geom2], c.dist)
obs = np.concatenate([
data.qpos.flat,
data.qvel.flat,
# data.cdof.flat,
data.cinert.flat,
data.cvel.flat,
# data.cacc.flat,
data.qfrc_actuator.flat,
data.cfrc_ext.flat,
data.qfrc_constraint.flat,
cdists,
# data.qfrc_bias.flat,
# data.qfrc_passive.flat,
self.dcom.flat,
])
return obs
@property
def _state(self):
return np.concatenate(
[self.sim.data.qpos.flat, self.sim.data.qvel.flat])
@property
def _full_state(self):
return np.concatenate([
self.sim.data.qpos,
self.sim.data.qvel,
self.sim.data.qacc,
self.sim.data.ctrl,
]).ravel()
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def viewer_setup(self):
"""
Does not work. Use mj_viewer_setup() instead
"""
pass
# -----------------------------
def reset(self, randomize=True):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob
# Added for bayesian_rl
def get_sim_state(self):
return self.sim.get_state()
# Added for bayesian_rl
def set_sim_state(self, state):
self.sim.set_state(state)
# Added for bayesian_rl
def set_state_vector(self, state_vector):
qpos = state_vector[:self.model.nq]
qvel = state_vector[self.model.nq:]
self.set_state(qpos, qvel)
# Added for bayesian_rl
def get_state_vector(self):
return self.state_vector()
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq, ) and qvel.shape == (
self.model.nv, )
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 1.0
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self, mode):
self.viewer = self._viewers.get(mode)
if self.viewer is None:
if mode == 'human':
self.viewer = mujoco_py.MjViewer(self.sim)
elif mode == 'rgb_array' or mode == 'depth_array':
self.viewer = mujoco_py.MjRenderContextOffscreen(self.sim, -1)
self.viewer_setup()
self._viewers[mode] = self.viewer
return self.viewer
def close(self):
if self.viewer is not None:
# self.viewer.finish()
self.viewer = None
self._viewers = {}
# def step(self, a):
# return self._step(a)
# Added for bayesian_rl
def take_action(self, a):
self.step(a)
return self.get_sim_state()
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t + 1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self,
policy,
horizon=1000,
num_episodes=1,
mode='exploration',
save_loc='/tmp/',
filename='newvid',
camera_name=None):
import skvideo.io
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy.get_action(
o)[0] if mode == 'exploration' else policy.get_action(
o)[1]['mean']
o, r, d, _ = self.step(a)
t = t + 1
curr_frame = self.sim.render(width=640,
height=480,
mode='offscreen',
camera_name=camera_name,
device_id=0)
arrs.append(curr_frame[::-1, :, :])
print(t, end=', ', flush=True)
file_name = save_loc + filename + '_' + str(ep) + ".mp4"
skvideo.io.vwrite(file_name, np.asarray(arrs))
print("saved", file_name)
t1 = timer.time()
print("time taken = %f" % (t1 - t0))
def render(self, mode='human', width=DEFAULT_SIZE, height=DEFAULT_SIZE):
if mode == 'rgb_array':
self._get_viewer(mode).render(width, height)
# window size used for old mujoco-py:
data = self._get_viewer(mode).read_pixels(width,
height,
depth=False)
# original image is upside-down, so flip it
return data[::-1, :, :]
elif mode == 'depth_array':
self._get_viewer(mode).render(width, height)
# window size used for old mujoco-py:
# Extract depth part of the read_pixels() tuple
data = self._get_viewer(mode).read_pixels(width,
height,
depth=True)[1]
# original image is upside-down, so flip it
return data[::-1, :]
elif mode == 'human':
self._get_viewer(mode).render()
model = load_model_from_xml(MODEL_XML)
sim = MjSim(model)
viewer = MjViewer(sim)
states = [{'box:x': +0.8, 'box:y': +0.8},
{'box:x': -0.8, 'box:y': +0.8},
{'box:x': -0.8, 'box:y': -0.8},
{'box:x': +0.8, 'box:y': -0.8},
{'box:x': +0.0, 'box:y': +0.0}]
# MjModel.joint_name2id returns the index of a joint in
# MjData.qpos.
x_joint_i = sim.model.get_joint_qpos_addr("box:x")
y_joint_i = sim.model.get_joint_qpos_addr("box:y")
print_box_xpos(sim)
while True:
for state in states:
sim_state = sim.get_state()
sim_state.qpos[x_joint_i] = state["box:x"]
sim_state.qpos[y_joint_i] = state["box:y"]
sim.set_state(sim_state)
sim.forward()
print("updated state to", state)
print_box_xpos(sim)
viewer.render()
if os.getenv('TESTING') is not None:
break
class GripperTester:
"""
A class that is used to test gripper
Args:
gripper (GripperModel): A gripper instance to be tested
pos (str): (x y z) position to place the gripper in string form, e.g. '0 0 0.3'
quat (str): rotation to apply to gripper in string form, e.g. '0 0 1 0' to flip z axis
gripper_low_pos (float): controls the gipper y position, larger -> higher
gripper_high_pos (float): controls the gipper y high position larger -> higher,
must be larger than gripper_low_pos
box_size (None or 3-tuple of int): the size of the box to grasp, None defaults to [0.02, 0.02, 0.02]
box_density (int): the density of the box to grasp
step_time (int): the interval between two gripper actions
render (bool): if True, show rendering
"""
def __init__(
self,
gripper,
pos,
quat,
gripper_low_pos,
gripper_high_pos,
box_size=None,
box_density=10000,
step_time=400,
render=True,
):
# define viewer
self.viewer = None
world = MujocoWorldBase()
# Add a table
arena = TableArena(table_full_size=(0.4, 0.4, 0.1), table_offset=(0, 0, 0.1), has_legs=False)
world.merge(arena)
# Add a gripper
self.gripper = gripper
# Create another body with a slider joint to which we'll add this gripper
gripper_body = ET.Element("body")
gripper_body.set("pos", pos)
gripper_body.set("quat", quat) # flip z
gripper_body.append(new_joint(name="gripper_z_joint", type="slide", axis="0 0 -1", damping="50"))
# Add all gripper bodies to this higher level body
for body in gripper.worldbody:
gripper_body.append(body)
# Merge the all of the gripper tags except its bodies
world.merge(gripper, merge_body=None)
# Manually add the higher level body we created
world.worldbody.append(gripper_body)
# Create a new actuator to control our slider joint
world.actuator.append(new_actuator(joint="gripper_z_joint", act_type="position", name="gripper_z", kp="500"))
# Add an object for grasping
# density is in units kg / m3
TABLE_TOP = [0, 0, 0.09]
if box_size is None:
box_size = [0.02, 0.02, 0.02]
box_size = np.array(box_size)
self.cube = BoxObject(
name="object", size=box_size, rgba=[1, 0, 0, 1], friction=[1, 0.005, 0.0001], density=box_density
)
object_pos = np.array(TABLE_TOP + box_size * [0, 0, 1])
mujoco_object = self.cube.get_obj()
# Set the position of this object
mujoco_object.set("pos", array_to_string(object_pos))
# Add our object to the world body
world.worldbody.append(mujoco_object)
# add reference objects for x and y axes
x_ref = BoxObject(
name="x_ref", size=[0.01, 0.01, 0.01], rgba=[0, 1, 0, 1], obj_type="visual", joints=None
).get_obj()
x_ref.set("pos", "0.2 0 0.105")
world.worldbody.append(x_ref)
y_ref = BoxObject(
name="y_ref", size=[0.01, 0.01, 0.01], rgba=[0, 0, 1, 1], obj_type="visual", joints=None
).get_obj()
y_ref.set("pos", "0 0.2 0.105")
world.worldbody.append(y_ref)
self.world = world
self.render = render
self.simulation_ready = False
self.step_time = step_time
self.cur_step = 0
if gripper_low_pos > gripper_high_pos:
raise ValueError(
"gripper_low_pos {} is larger " "than gripper_high_pos {}".format(gripper_low_pos, gripper_high_pos)
)
self.gripper_low_pos = gripper_low_pos
self.gripper_high_pos = gripper_high_pos
def start_simulation(self):
"""
Starts simulation of the test world
"""
model = self.world.get_model(mode="mujoco_py")
self.sim = MjSim(model)
if self.render:
self.viewer = MjViewer(self.sim)
self.sim_state = self.sim.get_state()
# For gravity correction
gravity_corrected = ["gripper_z_joint"]
self._gravity_corrected_qvels = [self.sim.model.get_joint_qvel_addr(x) for x in gravity_corrected]
self.gripper_z_id = self.sim.model.actuator_name2id("gripper_z")
self.gripper_z_is_low = False
self.gripper_actuator_ids = [self.sim.model.actuator_name2id(x) for x in self.gripper.actuators]
self.gripper_is_closed = True
self.object_id = self.sim.model.body_name2id(self.cube.root_body)
object_default_pos = self.sim.data.body_xpos[self.object_id]
self.object_default_pos = np.array(object_default_pos, copy=True)
self.reset()
self.simulation_ready = True
def reset(self):
"""
Resets the simulation to the initial state
"""
self.sim.set_state(self.sim_state)
self.cur_step = 0
def close(self):
"""
Close the viewer if it exists
"""
if self.viewer is not None:
self.viewer.close()
def step(self):
"""
Forward the simulation by one timestep
Raises:
RuntimeError: if start_simulation is not yet called.
"""
if not self.simulation_ready:
raise RuntimeError("Call start_simulation before calling step")
if self.gripper_z_is_low:
self.sim.data.ctrl[self.gripper_z_id] = self.gripper_low_pos
else:
self.sim.data.ctrl[self.gripper_z_id] = self.gripper_high_pos
if self.gripper_is_closed:
self._apply_gripper_action(1)
else:
self._apply_gripper_action(-1)
self._apply_gravity_compensation()
self.sim.step()
if self.render:
self.viewer.render()
self.cur_step += 1
def _apply_gripper_action(self, action):
"""
Applies binary gripper action
Args:
action (int): Action to apply. Should be -1 (open) or 1 (closed)
"""
gripper_action_actual = self.gripper.format_action(np.array([action]))
# rescale normalized gripper action to control ranges
ctrl_range = self.sim.model.actuator_ctrlrange[self.gripper_actuator_ids]
bias = 0.5 * (ctrl_range[:, 1] + ctrl_range[:, 0])
weight = 0.5 * (ctrl_range[:, 1] - ctrl_range[:, 0])
applied_gripper_action = bias + weight * gripper_action_actual
self.sim.data.ctrl[self.gripper_actuator_ids] = applied_gripper_action
def _apply_gravity_compensation(self):
"""
Applies gravity compensation to the simulation
"""
self.sim.data.qfrc_applied[self._gravity_corrected_qvels] = self.sim.data.qfrc_bias[
self._gravity_corrected_qvels
]
def loop(self, total_iters=1, test_y=False, y_baseline=0.01):
"""
Performs lower, grip, raise and release actions of a gripper,
each separated with T timesteps
Args:
total_iters (int): Iterations to perform before exiting
test_y (bool): test if object is lifted
y_baseline (float): threshold for determining that object is lifted
"""
seq = [(False, False), (True, False), (True, True), (False, True)]
for cur_iter in range(total_iters):
for cur_plan in seq:
self.gripper_z_is_low, self.gripper_is_closed = cur_plan
for step in range(self.step_time):
self.step()
if test_y:
if not self.object_height > y_baseline:
raise ValueError(
"object is lifed by {}, ".format(self.object_height)
+ "not reaching the requirement {}".format(y_baseline)
)
@property
def object_height(self):
"""
Queries the height (z) of the object compared to on the ground
Returns:
float: Object height relative to default (ground) object position
"""
return self.sim.data.body_xpos[self.object_id][2] - self.object_default_pos[2]
class my_env(parameterized.TestCase):
def __init__(self):
# super(lab_env, self).__init__(env)
# 导入xml文档
self.model = load_model_from_path("assets/simpleEE_4box.xml")
# 调用MjSim构建一个basic simulation
self.sim = MjSim(model=self.model)
self.sim = MjSim(self.model)
self.viewer = MjViewer(self.sim)
self.viewer._run_speed = 0.001
self.timestep = 0
# Sawyer Peg
#self.init_qpos = np.array([-0.305, -0.83, 0.06086, 1.70464, -0.02976, 0.62496, -0.04712])
# Flexiv Peg
self.init_qpos = np.array([-0.22, -0.43, 0.449, -2, -0.25, 0.799, 0.99])
for i in range(len(self.sim.data.qpos)):
self.sim.data.qpos[i] = self.init_qpos[i]
self.testQposFromSitePose(
(np.array([0.57, 0.075, 0.08]), np.array([0.000000e+00, 1.000000e+00, 0.000000e+00, 6.123234e-17])),
_INPLACE, True)
print(self.sim.data.ctrl)
print(self.sim.data.qpos)
def get_state(self):
self.sim.get_state()
# 如果定义了相机
# self.sim.data.get_camera_xpos('[camera name]')
def reset(self):
self.sim.reset()
self.timestep = 0
def step(self):
# self.testQposFromSitePose((np.array([0.605, 0.075, 0.03]), np.array([0.000000e+00, 1.000000e+00, 0.000000e+00, 6.123234e-17])), _INPLACE)
x=random.uniform(0.415, 0.635)
y=random.uniform(-0.105, 0.105)
self.testQposFromSitePose(
(np.array([x, y, 0.045]), np.array([0.000000e+00, 1.000000e+00, 0.000000e+00, 6.123234e-17])),
_INPLACE)
# self.testQposFromSitePose(
# (None, np.array([0.000000e+00, 1.000000e+00, 0.000000e+00, 6.123234e-17])),
# _INPLACE, True)
self.sim.step()
# self.sim.data.ctrl[0] += 0.01
# print(self.sim.data.ctrl)
# pdb.set_trace()
# print(self.sim.data.qpos)
print("sensordata", self.sim.data.sensordata)
# self.viewer.add_overlay(const.GRID_TOPRIGHT, " ", SESSION_NAME)
self.viewer.render()
self.timestep += 1
def create_viewer(self, run_speed=0.0005):
self.viewer = MjViewer(self.sim)
self.viewer._run_speed = run_speed
# self.viewer._hide_overlay = HIDE_OVERLAY
# self.viewer.vopt.frame = DISPLAY_FRAME
# self.viewer.cam.azimuth = CAM_AZIMUTH
# self.viewer.cam.distance = CAM_DISTANCE
# self.viewer.cam.elevation = CAM_ELEVATION
def testQposFromSitePose(self, target, inplace, qpos_flag=False):
physics = mujoco.Physics.from_xml_string(FlexivPeg_XML)
target_pos, target_quat = target
count = 0
physics2 = physics.copy(share_model=True)
resetter = _ResetArm(seed=0)
while True:
result = ik.qpos_from_site_pose(
physics=physics2,
site_name=_SITE_NAME,
target_pos=target_pos,
target_quat=target_quat,
joint_names=_JOINTS,
tol=_TOL,
max_steps=_MAX_STEPS,
inplace=inplace,
)
if result.success:
break
elif count < _MAX_RESETS:
resetter(physics2)
count += 1
else:
raise RuntimeError(
'Failed to find a solution within %i attempts.' % _MAX_RESETS)
self.assertLessEqual(result.steps, _MAX_STEPS)
self.assertLessEqual(result.err_norm, _TOL)
# pdb.set_trace()
physics.data.qpos[:] = result.qpos
for i in range(len(self.sim.data.qpos)):
if qpos_flag:
self.sim.data.qpos[i]=physics.data.qpos[i]
else:
self.sim.data.ctrl[i] = physics.data.qpos[i]
# print(physics.data.qpos)
mjlib.mj_fwdPosition(physics.model.ptr, physics.data.ptr)
if target_pos is not None:
pos = physics.named.data.site_xpos[_SITE_NAME]
np.testing.assert_array_almost_equal(pos, target_pos)
if target_quat is not None:
xmat = physics.named.data.site_xmat[_SITE_NAME]
quat = np.empty_like(target_quat)
mjlib.mju_mat2Quat(quat, xmat)
quat /= quat.ptp() # Normalize xquat so that its max-min range is 1
def print_state(state):
time, qpos, qvel, act, udd_state = state.time, state.qpos, state.qvel, state.act, state.udd_state
print("t: %5.3f" % time)
print("qpos: ", qpos)
print("qvel: ", qvel)
print("tosser (slide,hinge): ", qpos[:2])
print("object (z,y,pitch): ", qpos[-3:])
model = load_model_from_path("../../xmls/tosser.xml")
sim = MjSim(model)
viewer = MjViewer(sim)
sim_state = sim.get_state()
while True:
sim.set_state(sim_state)
for i in range(1000):
state = sim.get_state()
# time, qpos, qvel, act, udd_state = state.time, state.qpos, state.qvel, state.act, state.udd_state
# print(time, qpos, qvel)
print_state(state)
if i < 150:
sim.data.ctrl[0] = -0.0
sim.data.ctrl[1] = -0.0
else:
sim.data.ctrl[0] = -1.0
sim.data.ctrl[1] = -1.0
class MujocoEnv(gym.Env):
"""Superclass for all MuJoCo environments.
"""
def __init__(self, model_path, frame_skip):
if model_path.startswith("/"):
fullpath = model_path
else:
fullpath = os.path.join(os.path.dirname(__file__), "assets", model_path)
if not path.exists(fullpath):
raise IOError("File %s does not exist" % fullpath)
self.frame_skip = frame_skip
self.model = load_model_from_path(fullpath)
self.sim = MjSim(self.model)
self.data = self.sim.data
self.metadata = {
'render.modes': ['human', 'rgb_array'],
'video.frames_per_second': int(np.round(1.0 / self.dt))
}
self.mujoco_render_frames = False
self.init_qpos = self.data.qpos.ravel().copy()
self.init_qvel = self.data.qvel.ravel().copy()
observation, _reward, done, _info = self._step(np.zeros(self.model.nu))
assert not done
self.obs_dim = np.sum([o.size for o in observation]) if type(observation) is tuple else observation.size
bounds = self.model.actuator_ctrlrange.copy()
low = bounds[:, 0]
high = bounds[:, 1]
self.action_space = spaces.Box(low, high)
high = np.inf*np.ones(self.obs_dim)
low = -high
self.observation_space = spaces.Box(low, high)
self._seed()
def _seed(self, seed=None):
self.np_random, seed = seeding.np_random(seed)
return [seed]
# methods to override:
# ----------------------------
def reset_model(self):
"""
Reset the robot degrees of freedom (qpos and qvel).
Implement this in each subclass.
"""
raise NotImplementedError
def mj_viewer_setup(self):
"""
Due to specifics of new mujoco rendering, the standard viewer cannot be used
with this set-up. Instead we use this mujoco specific function.
"""
pass
def viewer_setup(self):
"""
Does not work. Use mj_viewer_setup() instead
"""
pass
# -----------------------------
def _reset(self):
self.sim.reset()
self.sim.forward()
ob = self.reset_model()
return ob
def set_state(self, qpos, qvel):
assert qpos.shape == (self.model.nq,) and qvel.shape == (self.model.nv,)
state = self.sim.get_state()
for i in range(self.model.nq):
state.qpos[i] = qpos[i]
for i in range(self.model.nv):
state.qvel[i] = qvel[i]
self.sim.set_state(state)
self.sim.forward()
@property
def dt(self):
return self.model.opt.timestep * self.frame_skip
def do_simulation(self, ctrl, n_frames):
for i in range(self.model.nu):
self.sim.data.ctrl[i] = ctrl[i]
for _ in range(n_frames):
self.sim.step()
if self.mujoco_render_frames is True:
self.mj_render()
def mj_render(self):
try:
self.viewer.render()
except:
self.mj_viewer_setup()
self.viewer._run_speed = 1.0
#self.viewer._run_speed /= self.frame_skip
self.viewer.render()
def _get_viewer(self):
return None
def state_vector(self):
state = self.sim.get_state()
return np.concatenate([
state.qpos.flat, state.qvel.flat])
# -----------------------------
def visualize_policy(self, policy, horizon=1000, num_episodes=1, mode='exploration'):
self.mujoco_render_frames = True
for ep in range(num_episodes):
o = self.reset()
d = False
t = 0
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
self.mujoco_render_frames = False
def visualize_policy_offscreen(self, policy, horizon=1000,
num_episodes=1,
mode='exploration',
save_loc='/tmp/',
filename='newvid',
camera_name=None):
import skvideo.io
for ep in range(num_episodes):
print("Episode %d: rendering offline " % ep, end='', flush=True)
o = self.reset()
d = False
t = 0
arrs = []
t0 = timer.time()
while t < horizon and d is False:
a = policy.get_action(o)[0] if mode == 'exploration' else policy.get_action(o)[1]['evaluation']
o, r, d, _ = self.step(a)
t = t+1
curr_frame = self.sim.render(width=640, height=480, mode='offscreen',
camera_name=camera_name, device_id=0)
arrs.append(curr_frame[::-1,:,:])
print(t, end=', ', flush=True)
file_name = save_loc + filename + str(ep) + ".mp4"
skvideo.io.vwrite( file_name, np.asarray(arrs))
print("saved", file_name)
t1 = timer.time()
print("time taken = %f"% (t1-t0))
