def __call__(self,iteration):
p = self.t.calcPress(iteration,pOnly=True)
plt.imshow(p[:,0,:],origin=0)
plt.axis('tight')
plt.colorbar()
def plotmaptime():
pcolormesh(yoko, time*1e6, absolute(Magcom))
title("Reflection vs flux \n and time (1 us pulse) at 4.46 GHz")
xlabel("Flux (V)")
ylabel("Time (us)")
#ylim(0, 1.5)
colorbar()
def plots(i,tcodnt, temp, forecast,added_tcodnt,n_steps,path, rsdlsc,rsdlpctgc, sqrpctgc,a,b,c,d,e):
fig=mp.figure(figsize=[15,6])#5:2,89mm
grid=mp.GridSpec(3,36,wspace=1,hspace=0.4)
ax=mp.subplot(grid[:2,:18])
cpplot(i,tcodnt, temp, forecast,added_tcodnt,n_steps,path)
#rscplot(i,tcodnt, rsdlsc, rsdlpctgc, sqrpctgc,path)
ax=mp.subplot(grid[2,:18])
im1=colorbar(ax,tcodnt, rsdlsc,i,0,-1,c**2)
ax.set_yticks([])
ax=mp.subplot(grid[2,21:35])
im2=colorbar(ax,tcodnt, rsdlsc,i,a,b,int(c/2))
ax.set_yticks([])
ax=mp.subplot(grid[:2,21:35])
partial_plot_for_ahead_interval(i,tcodnt, temp, forecast,added_tcodnt,n_steps,path,rsdlpctgc,a,b)
ax1=mp.subplot(grid[:,35])
clb1=mp.colorbar(im2,cax=ax1,extend='both')
#clb1.set_label('residuals',fontsize=12,color='grey')
ax2=mp.subplot(grid[:,18])
clb2=mp.colorbar(im1,cax=ax2,extend='both')
clb1.set_label('residuals',fontsize=size)
# ax=mp.subplot(grid[:2,32:35])
# partial_plot_for_ahead_interval(i,tcodnt, temp, forecast,added_tcodnt,n_steps,path,rsdlpctgc,d,e)
# ax=mp.subplot(grid[2,32:35])
# im3=colorbar(ax,tcodnt, rsdlsc,i,d,e,int(c/5))
# ax.set_yticks([])
# ax3=mp.subplot(grid[:,35])
# clb3=mp.colorbar(im3,cax=ax3,extend='both')
# clb3.set_label('residuals',fontsize=size,color='grey')
mp.savefig((str(path)+'\\'+'results'+'\\'+'Accuracy_Graph_%d'+'.jpg')%i,format='jpg',dpi=2000)
def main():
gw = gridworld()
a = agent(gw)
for epoch in range(20):
a.initEpoch()
while True:
rwd, stat, act = a.takeAction()
a.updateQ(rwd, stat, act)
if gw.status() == 'Goal':
break
if mod(a.counter, 10)==0:
print(gw.state())
print(gw.field())
print('Finished')
print(a.counter)
print(gw.state())
print(gw.field())
Q = transpose(a.Q(), (2,0,1))
for i in range(4):
plt.subplot(2,2,i)
plt.imshow(Q[i], interpolation='nearest')
plt.title(a.actions()[i])
plt.colorbar()
plt.show()
def plotmapdBtime():
pcolormesh(yoko, time*1e6, dB(S11c), vmin=-65, vmax=-30)
title("Reflection (dB) vs flux \n and time (1 us pulse) at 4.46 GHz")
xlabel("Flux (V)")
ylabel("Time (us)")
#ylim(0, 1.5)
colorbar()
def test_minimized_rasterized():
# This ensures that the rasterized content in the colorbars is
# only as thick as the colorbar, and doesn't extend to other parts
# of the image. See #5814. While the original bug exists only
# in Postscript, the best way to detect it is to generate SVG
# and then parse the output to make sure the two colorbar images
# are the same size.
from xml.etree import ElementTree
np.random.seed(0)
data = np.random.rand(10, 10)
fig, ax = plt.subplots(1, 2)
p1 = ax[0].pcolormesh(data)
p2 = ax[1].pcolormesh(data)
plt.colorbar(p1, ax=ax[0])
plt.colorbar(p2, ax=ax[1])
buff = io.BytesIO()
plt.savefig(buff, format='svg')
buff = io.BytesIO(buff.getvalue())
tree = ElementTree.parse(buff)
width = None
for image in tree.iter('image'):
if width is None:
width = image['width']
else:
if image['width'] != width:
assert False
def atest_interpolation_coast(self):
"""Test interpolation."""
reader = reader_ROMS_native.Reader('/disk2/data/SVIM/ocean_avg_20081201.nc')
num_points = 50
np.random.seed(0) # To get the same random numbers each time
lons = np.random.uniform(12, 16, num_points)
lats = np.random.uniform(68.3, 68.3, num_points)
z = np.random.uniform(-100, 0, num_points)
x, y = reader.lonlat2xy(lons, lats)
variables = ['x_sea_water_velocity', 'y_sea_water_velocity',
'sea_water_temperature']
# Read a block of data covering the points
data = reader.get_variables(variables, time=reader.start_time,
x=x, y=y, z=z, block=True)
import matplotlib.pyplot as plt
plt.imshow(data['x_sea_water_velocity'][0,:,:])
plt.colorbar()
plt.show()
b = ReaderBlock(data, interpolation_horizontal='nearest')
env, prof = b.interpolate(x, y, z, variables,
profiles=['x_sea_water_velocity'],
profiles_depth=[-30, 0])
def implot(plt, x, y, Z, ax=None, colorbar=True, **kwargs):
"""Image plot of general data (like imshow but with non-pixel axes).
Parameters
----------
plt : plot object
Plot object, typically `matplotlib.pyplot`.
x : (M,) array_like
Vector of x-axis points, must be linear (equally spaced).
y : (N,) array_like
Vector of y-axis points, must be linear (equally spaced).
Z : (M, N) array_like
Matrix of data to be displayed, the value at each (x, y) point.
ax : axis object (optional)
A specific axis to plot on (defaults to `plt.gca()`).
colorbar: boolean (optional)
Whether to plot a colorbar.
**kwargs
Additional arguments for `ax.imshow`.
"""
ax = plt.gca() if ax is None else ax
def is_linear(x):
diff = np.diff(x)
return np.allclose(diff, diff[0])
assert is_linear(x) and is_linear(y)
image = ax.imshow(Z, aspect='auto', extent=(x[0], x[-1], y[-1], y[0]),
**kwargs)
if colorbar:
plt.colorbar(image, ax=ax)
def _plot_loading(loadings, idx, axes_manager, ax=None,
comp_label='PC', no_nans=True, calibrate=True,
cmap=plt.cm.gray):
if ax is None:
ax = plt.gca()
if no_nans:
loadings = np.nan_to_num(loadings)
if axes_manager.navigation_dimension == 2:
extent = None
# get calibration from a passed axes_manager
shape = axes_manager._navigation_shape_in_array
if calibrate:
extent = (axes_manager._axes[0].low_value,
axes_manager._axes[0].high_value,
axes_manager._axes[1].high_value,
axes_manager._axes[1].low_value)
im = ax.imshow(loadings[idx].reshape(shape), cmap=cmap, extent=extent,
interpolation='nearest')
div = make_axes_locatable(ax)
cax = div.append_axes("right", size="5%", pad=0.05)
plt.colorbar(im, cax=cax)
elif axes_manager.navigation_dimension == 1:
if calibrate:
x = axes_manager._axes[0].axis
else:
x = np.arange(axes_manager._axes[0].size)
ax.step(x, loadings[idx])
else:
messages.warning_exit('View not supported')
def plot_jacobian(A, name, cmap= plt.cm.coolwarm, normalize=True, precision=1e-6):
"""
Customized visualization of jacobian matrices for observing
sparsity patterns
"""
plt.figure()
fig, ax = plt.subplots()
if normalize is True:
plt.imshow(A, interpolation='none', cmap=cmap,
norm = mpl.colors.Normalize(vmin=-1.,vmax=1.))
else:
plt.imshow(A, interpolation='none', cmap=cmap)
plt.colorbar(format=ticker.FuncFormatter(fmt))
ax.spy(A, marker='.', markersize=0, precision=precision)
ax.spines['right'].set_visible(True)
ax.spines['bottom'].set_visible(True)
ax.xaxis.set_ticks_position('top')
ax.yaxis.set_ticks_position('left')
xlabels = np.linspace(0, A.shape[0], 5, True, dtype=int)
ylabels = np.linspace(0, A.shape[1], 5, True, dtype=int)
plt.xticks(xlabels)
plt.yticks(ylabels)
plt.savefig(name, bbox_inches='tight', pad_inches=0.05)
plt.close()
return
def pltytfield():
fig=plt.figure()
ppy=yt.ProjectionPlot(ds, "x", "Bxy", weight_field="density") #Project X-component of B-field from z-direction
By=ppy._frb["Bxy"]
ax=fig.add_subplot(111)
plt.xticks(tick_locs,tick_lbls)
plt.yticks(tick_locs,tick_lbls)
Bymag=ax.pcolormesh(np.log10(By))
cbar_m=plt.colorbar(Bymag)
cbar_m.set_label("Bxy")
plt.title("Bxy in yz plane")
fig=plt.figure()
ppy=yt.ProjectionPlot(ds, "y", "Bxy", weight_field="density") #Project X-component of B-field from z-direction
By=ppy._frb["Bxy"]
ax=fig.add_subplot(111)
plt.xticks(tick_locs,tick_lbls)
plt.yticks(tick_locs,tick_lbls)
Bymag=ax.pcolormesh(np.log10(By))
cbar_m=plt.colorbar(Bymag)
cbar_m.set_label("Bxy")
plt.title("Bxy in xz plane")
fig=plt.figure()
ppy=yt.ProjectionPlot(ds, "z", "Bxy", weight_field="density") #Project X-component of B-field from z-direction
By=ppy._frb["Bxy"]
ax=fig.add_subplot(111)
plt.xticks(tick_locs,tick_lbls)
plt.yticks(tick_locs,tick_lbls)
Bymag=ax.pcolormesh(np.log10(By))
cbar_m=plt.colorbar(Bymag)
cbar_m.set_label("Bxy")
plt.title("Bxy in xy plane")
def plot_confusion_matrix(cm, classes,
normalize=False,
title='Confusion matrix',
cmap=plt.cm.Blues):
"""
This function prints and plots the confusion matrix.
Normalization can be applied by setting `normalize=True`.
"""
plt.imshow(cm, interpolation='nearest', cmap=cmap)
plt.title(title)
plt.colorbar()
tick_marks = np.arange(len(classes))
plt.xticks(tick_marks, classes, rotation=45)
plt.yticks(tick_marks, classes)
if normalize:
cm = cm.astype('float') / cm.sum(axis=1)[:, np.newaxis]
print("Normalized confusion matrix")
else:
print('Confusion matrix, without normalization')
print(cm)
thresh = cm.max() / 2.
for i, j in itertools.product(range(cm.shape[0]), range(cm.shape[1])):
plt.text(j, i, cm[i, j],
horizontalalignment="center",
color="white" if cm[i, j] > thresh else "black")
plt.tight_layout()
plt.ylabel('True label')
plt.xlabel('Predicted label')
def run(meth = 'moment'):
out,srts = bs.run0(arr = arr, itr = 2, meth = meth)
f = myplots.fignum(3,(12,6))
ax = f.add_subplot(111)
csrts = [s for s in srts if len(s) == len(cols)][0]
rsrts = [s for s in srts if len(s) == len(rows)][0]
cprint = [rows[rs] for rs in rsrts]
rprint = [cols[cs] for cs in csrts]
im = ax.imshow(out,
interpolation= 'nearest',
cmap = plt.get_cmap('OrRd'),
)
#flip the rows and columns... looks better.
ax.set_xticks(arange(len(cols))+.25)
ax.set_yticks(arange(len(rows))+.25)
ax.set_yticklabels([e for e in cprint])
ax.set_xticklabels(rprint)
print 'rows: \n{0}'.format(', '.join([e.strip() for e in rprint]))
print
print 'cols: \n{0}'.format(', '.join([e.strip() for e in cprint]))
plt.colorbar(im)
f.savefig(myplots.figpath('correlation_plot_2_4_{0}.pdf')
.format(meth))
return
def streamlineBxz_dens():
fig=plt.figure()
ppy=yt.ProjectionPlot(ds, "y", "Bxz", weight_field="density") #Project X-component of B-field from z-direction
By=ppy._frb["density"]
ax=fig.add_subplot(111)
plt.xticks(tick_locs,tick_lbls)
plt.yticks(tick_locs,tick_lbls)
Bymag=ax.pcolormesh(np.log10(By), cmap="YlGn")
cbar_m=plt.colorbar(Bymag)
cbar_m.set_label("density")
res=800
#densxy=Density2D(0,1) #integrated density along given axis
U=Flattenx(0,1) #X-magnetic field integrated along given axis
V=Flattenz(0,1) #Z-magnetic field
#U=np.asarray(zip(*x2)[::-1]) #rotate the matrix 90 degrees to correct orientation to match projected plots
#V=np.asarray(zip(*y2)[::-1])
norm=np.sqrt(U**2+V**2) #magnitude of the vector
Unorm=U/norm #normalise vectors
Vnorm=V/norm
#mask_Unorm=np.ma.masked_where(densxy<np.mean(densxy),Unorm) #create a masked array of Unorm values only in high density regions
#mask_Vnorm=np.ma.masked_where(densxy<np.mean(densxy),Vnorm)
X,Y=np.meshgrid(np.linspace(0,res,64, endpoint=True),np.linspace(0,res,64,endpoint=True))
streams=plt.streamplot(X,Y,Unorm,Vnorm,color=norm*1e6,density=(3,3),cmap=plt.cm.autumn)
cbar=plt.colorbar(orientation="horizontal")
cbar.set_label('Bxz streamlines (uG)')
plt.title("Bxz streamlines on weighted density projection")
plt.xlabel("(1e4 AU)")
plt.ylabel("(1e4 AU)")
def TuningResponseArea(tuningCurves, unitKey='', figPath=[]):
""" Plot the tuning response area for tuning curve data.
:param tuningCurves: pandas.DataFrame from spreadsheet with experimental data loaded from Excel file
:type tuningCurves: pandas.core.DataFrame
:param unitKey: identifying string for data, possibly unit name/number and test number
:type unitKey: str
:param figPath: Directory location for plots to be saved
:type figPath: str
"""
f = plt.figure()
colorRange = (-10,10.1)
I = np.unique(np.array(tuningCurves['intensity']))
F = np.array(tuningCurves['freq'])
R = np.array(np.zeros((len(I), len(F))))
for ci, i in enumerate(I):
for cf, f in enumerate(F):
R[ci,cf] = tuningCurves['response'].where(tuningCurves['intensity']==i).where(tuningCurves['freq']==f).dropna().values[0]
levelRange = np.arange(colorRange[0], colorRange[1], (colorRange[1]-colorRange[0])/float(25*(colorRange[1]-colorRange[0])))
sns.set_context(rc={"figure.figsize": (7, 4)})
ax = plt.contourf(F, I, R)#, vmin=colorRange[0], vmax=colorRange[1], levels=levelRange, cmap = cm.bwr )
plt.colorbar()
# plt.title(unit, fontsize=14)
plt.xlabel('Frequency (kHz)', fontsize=14)
plt.ylabel('Intensity (dB)', fontsize=14)
if len(figPath)>0:
plt.savefig(figPath + 'tuningArea_' + unitKey +'.png')
def plot_heat_net(net_mat, sectors):
"""Plot a heat map of the net relations.
Parameters
----------
net_mat: np.ndarray
the net represented in a matrix way.
sectors: list
the name of the elements of the adjacency matrix network.
Returns
-------
fig: matplotlib.pyplot.figure
the figure of the matrix heatmap.
"""
vmax = np.sort([np.abs(net_mat.max()), np.abs(net_mat.min())])[::-1][0]
n_sectors = len(sectors)
assert(net_mat.shape[0] == net_mat.shape[1])
assert(n_sectors == len(net_mat))
fig = plt.figure()
plt.imshow(net_mat, interpolation='none', cmap=plt.cm.RdYlGn,
vmin=-vmax, vmax=vmax)
plt.xticks(range(n_sectors), sectors)
plt.yticks(range(n_sectors), sectors)
plt.xticks(rotation=90)
plt.colorbar()
return fig
def _imshow_tfr(ax, ch_idx, tmin, tmax, vmin, vmax, onselect, ylim=None,
tfr=None, freq=None, vline=None, x_label=None, y_label=None,
colorbar=False, picker=True, cmap='RdBu_r', title=None):
""" Aux function to show time-freq map on topo """
import matplotlib.pyplot as plt
from matplotlib.widgets import RectangleSelector
extent = (tmin, tmax, freq[0], freq[-1])
img = ax.imshow(tfr[ch_idx], extent=extent, aspect="auto", origin="lower",
vmin=vmin, vmax=vmax, picker=picker, cmap=cmap)
if isinstance(ax, plt.Axes):
if x_label is not None:
ax.set_xlabel(x_label)
if y_label is not None:
ax.set_ylabel(y_label)
else:
if x_label is not None:
plt.xlabel(x_label)
if y_label is not None:
plt.ylabel(y_label)
if colorbar:
plt.colorbar(mappable=img)
if title:
plt.title(title)
if not isinstance(ax, plt.Axes):
ax = plt.gca()
ax.RS = RectangleSelector(ax, onselect=onselect) # reference must be kept
def _erfimage_imshow(ax, ch_idx, tmin, tmax, vmin, vmax, ylim=None,
data=None, epochs=None, sigma=None,
order=None, scalings=None, vline=None,
x_label=None, y_label=None, colorbar=False,
cmap='RdBu_r'):
"""Aux function to plot erfimage on sensor topography"""
from scipy import ndimage
import matplotlib.pyplot as plt
this_data = data[:, ch_idx, :].copy()
ch_type = channel_type(epochs.info, ch_idx)
if ch_type not in scalings:
raise KeyError('%s channel type not in scalings' % ch_type)
this_data *= scalings[ch_type]
if callable(order):
order = order(epochs.times, this_data)
if order is not None:
this_data = this_data[order]
if sigma > 0.:
this_data = ndimage.gaussian_filter1d(this_data, sigma=sigma, axis=0)
ax.imshow(this_data, extent=[tmin, tmax, 0, len(data)], aspect='auto',
origin='lower', vmin=vmin, vmax=vmax, picker=True,
cmap=cmap, interpolation='nearest')
if x_label is not None:
plt.xlabel(x_label)
if y_label is not None:
plt.ylabel(y_label)
if colorbar:
plt.colorbar()
def imshow_active_cells(grid, values, var_name=None, var_units=None,
grid_units=(None, None), symmetric_cbar=False,
cmap='pink'):
"""
.. deprecated:: 0.6
Use :meth:`imshow_active_cell_grid`, above, instead.
"""
data = values.view()
data.shape = (grid.shape[0]-2, grid.shape[1]-2)
y = np.arange(data.shape[0]) - grid.dx * .5
x = np.arange(data.shape[1]) - grid.dx * .5
if symmetric_cbar:
(var_min, var_max) = (data.min(), data.max())
limit = max(abs(var_min), abs(var_max))
limits = (-limit, limit)
else:
limits = (None, None)
plt.pcolormesh(x, y, data, vmin=limits[0], vmax=limits[1], cmap=cmap)
plt.gca().set_aspect(1.)
plt.autoscale(tight=True)
plt.colorbar()
plt.xlabel('X (%s)' % grid_units[1])
plt.ylabel('Y (%s)' % grid_units[0])
if var_name is not None:
plt.title('%s (%s)' % (var_name, var_units))
plt.show()
def demo_locatable_axes_hard(fig1):
from mpl_toolkits.axes_grid1 import SubplotDivider, LocatableAxes, Size
divider = SubplotDivider(fig1, 2, 2, 2, aspect=True)
# axes for image
ax = LocatableAxes(fig1, divider.get_position())
# axes for colorbar
ax_cb = LocatableAxes(fig1, divider.get_position())
h = [Size.AxesX(ax), Size.Fixed(0.05), Size.Fixed(0.2)] # main axes # padding, 0.1 inch # colorbar, 0.3 inch
v = [Size.AxesY(ax)]
divider.set_horizontal(h)
divider.set_vertical(v)
ax.set_axes_locator(divider.new_locator(nx=0, ny=0))
ax_cb.set_axes_locator(divider.new_locator(nx=2, ny=0))
fig1.add_axes(ax)
fig1.add_axes(ax_cb)
ax_cb.axis["left"].toggle(all=False)
ax_cb.axis["right"].toggle(ticks=True)
Z, extent = get_demo_image()
im = ax.imshow(Z, extent=extent, interpolation="nearest")
plt.colorbar(im, cax=ax_cb)
plt.setp(ax_cb.get_yticklabels(), visible=False)
def plot_confusion_matrix(cm, labels, axis=None, fontsize=13, colorbar=False):
from matplotlib import pyplot as plt
title = 'Confusion matrix'
cmap = plt.cm.Blues
# column normalize
if np.max(cm) > 1:
cm_normalized = cm.astype('float') / cm.sum(axis=1)[:, np.newaxis]
else:
cm_normalized = cm
if axis is None:
axis = plt.gca()
im = axis.imshow(cm_normalized, interpolation='nearest', cmap=cmap)
axis.set_title(title)
# axis.get_figure().colorbar(im)
tick_marks = np.arange(len(labels))
axis.set_xticks(tick_marks)
axis.set_yticks(tick_marks)
axis.set_xticklabels(labels, rotation=90, fontsize=fontsize)
axis.set_yticklabels(labels, fontsize=fontsize)
axis.set_ylabel('True label')
axis.set_xlabel('Predicted label')
if colorbar == 'all':
fig = axis.get_figure()
axes = fig.get_axes()
fig.colorbar(im, ax=axes)
elif colorbar:
plt.colorbar(im, ax=axis)
# axis.tight_layout()
return axis
def el_plot(data, Map=False, show=True):
"""
Plot the elevation for the region from the last time series
:Parameters:
**data** -- the standard python data dictionary
**Map** -- {True, False} (optional): Optional argument. If True,
the elevation will be plotted on a map.
"""
trigrid = data['trigrid']
plt.gca().set_aspect('equal')
plt.tripcolor(trigrid, data['zeta'][-1,:])
plt.colorbar()
plt.title("Elevation")
if Map:
#we set the corners of where the map should show up
llcrnrlon, urcrnrlon = plt.xlim()
llcrnrlat, urcrnrlat = plt.ylim()
#we construct the map. Note that resolution serves to increase
#or decrease the detail in the coastline. Currently set to
#'i' for 'intermediate'
m = Basemap(llcrnrlon, llcrnrlat, urcrnrlon, urcrnrlat, \
resolution='i', suppress_ticks=False)
#set color for continents. Default is grey.
m.fillcontinents(color='ForestGreen')
m.drawmapboundary()
m.drawcoastlines()
if show:
plt.show()
def corrplot(C, cmap=None, cmap_range=(0.,1.), cbar=True, fontsize=14, **kwargs):
"""
Plots values in a correlation matrix
"""
ax = kwargs['ax']
n = len(C)
# defaults
if cmap is None:
if min(cmap_range) >= 0:
cmap = "OrRd"
elif max(cmap_range) <= 0:
cmap = "RdBu"
else:
cmap = "gray"
# remove values
rr, cc = np.triu_indices(n, k=1)
C[rr, cc] = np.nan
vmin, vmax = cmap_range
img = ax.imshow(C, cmap=cmap, vmin=vmin, vmax=vmax, aspect='equal')
if cbar:
plt.colorbar(img) #, shrink=0.75)
for j in range(n):
for i in range(j+1,n):
ax.text(i, j, '{:0.2f}'.format(C[i,j]), fontsize=fontsize,
fontdict={'ha': 'center', 'va': 'center'})
noticks(ax=ax)
def plot_confusion_matrix(cm, classes,
normalize=False,
title='Confusion matrix',
cmap=None,
zmin=1):
"""This function prints and plots the confusion matrix for the intent classification.
Normalization can be applied by setting `normalize=True`."""
import numpy as np
zmax = cm.max()
plt.imshow(cm, interpolation='nearest', cmap=cmap if cmap else plt.cm.Blues, aspect='auto',
norm=LogNorm(vmin=zmin, vmax=zmax))
plt.title(title)
plt.colorbar()
tick_marks = np.arange(len(classes))
plt.xticks(tick_marks, classes, rotation=90)
plt.yticks(tick_marks, classes)
if normalize:
cm = cm.astype('float') / cm.sum(axis=1)[:, np.newaxis]
logger.info("Normalized confusion matrix: \n{}".format(cm))
else:
logger.info("Confusion matrix, without normalization: \n{}".format(cm))
thresh = cm.max() / 2.
for i, j in itertools.product(range(cm.shape[0]), range(cm.shape[1])):
plt.text(j, i, cm[i, j],
horizontalalignment="center",
color="white" if cm[i, j] > thresh else "black")
plt.ylabel('True label')
plt.xlabel('Predicted label')
def __call__(self,u,w,bx,by,bz,b2,t):
q = 8
map = cm.red_blue()
if self.x == None:
nx = u.shape[2]
nz = u.shape[0]
self.x,self.y = np.meshgrid(range(nx),range(nz))
x,y = self.x,self.y
avgu = np.average(u,1)
avgw = np.average(w,1)
avgbx = np.average(bx,1)
avgby = np.average(by,1)
avgbz = np.average(bz,1)
avgb2 = np.average(b2,1)
avgt = np.average(t,1)
plt.subplot(121)
plt.imshow(avgt,cmap=map,origin='lower')
plt.colorbar()
plt.quiver(x[::q,::q],y[::q,::q],avgu[::q,::q],avgw[::q,::q])
plt.title('Tracer-Vel')
plt.axis("tight")
plt.subplot(122)
plt.imshow(avgby,cmap=map,origin='lower')
plt.colorbar()
plt.quiver(x[::q,::q],y[::q,::q],avgbx[::q,::q],avgbz[::q,::q])
plt.title('By-Twist')
plt.axis("tight")
def get_heatmap(data_mat, name_for_saving_files, pp,stimulus_on_time, stimulus_off_time,delta_ff, f0_start, f0_end):
#Plot heatmap for validation
A1 = np.reshape(data_mat, (np.size(data_mat,0)*np.size(data_mat,1), np.size(data_mat,2)))
if delta_ff == 1:
delta_ff_A1 = np.zeros(np.shape(A1))
for ii in xrange(0,np.size(A1,0)):
delta_ff_A1[ii,:] = (A1[ii,:]-np.mean(A1[ii,f0_start:f0_end]))/(np.std(A1[ii,f0_start:f0_end])+0.1)
B = np.argsort(np.mean(delta_ff_A1, axis=1))
print np.max(delta_ff_A1)
else:
B = np.argsort(np.mean(A1, axis=1))
print np.max(A1)
with sns.axes_style("white"):
C = A1[B,:][-2000:,:]
fig2 = plt.imshow(C,aspect='auto', cmap='jet', vmin = np.min(C), vmax = np.max(C))
plot_vertical_lines_onset(stimulus_on_time)
plot_vertical_lines_offset(stimulus_off_time)
plt.title(name_for_saving_files)
plt.colorbar()
fig2 = plt.gcf()
pp.savefig(fig2)
plt.close()
def plot_map(AX, fname, mmin=0,mmax=1, annot='A', xoff=False,yoff=False, xlab='None', ylab='None', aspect=False, row_lab=None, col_lab=None, log=False):
global xtix, ytix, xtix_loc, ytix_loc, fsa, fs
mmap = np.genfromtxt(fname, delimiter=',')
if log:
mmap = np.log(mmap)
im = AX.pcolor(mmap, vmin=mmin, vmax=mmax)
plt.colorbar(im, ax=AX)
AX.annotate(annot, (0,0), (0.02,0.9), color='white', fontsize= fsa, fontweight='bold', xycoords='data', textcoords='axes fraction')
if row_lab != None:
AX.annotate(row_lab, xy=(0.0, 0.5), size='x-large', ha='right', va='center', xytext= (-4.5, 5))#(-ax.yaxis.labelpad - pad, 0),xycoords=ax.yaxis.label, textcoords='offset points'
if col_lab != None:
AX.set_title(col_lab)
AX.set_xticks(xtix_loc)
AX.set_yticks(ytix_loc)
if xoff:
AX.set_xticklabels('')
else:
AX.set_xticklabels(xtix)
if yoff:
AX.set_yticklabels('')
else:
AX.set_yticklabels(ytix)
if xlab != 'None':
AX.set_xlabel(xlab, fontsize = fs)
if ylab != 'None':
AX.set_ylabel(ylab, fontsize = fs)
if aspect:
AX.set_aspect('equal', 'datalim')
def lasso_regression(features, solutions, verbose=0):
columns = solutions.columns
clf = Lasso(alpha=1e-4, max_iter=5000)
print('Training Model... ')
clf.fit(features, solutions)
feature_coeff = clf.coef_
features_importances = np.zeros((169, 3))
for idx in range(3):
features_importance = np.reshape(feature_coeff[idx, :], (169, 8))
features_importance = np.max(features_importance, axis=1)
features_importances[:, idx] = features_importance
features_importance_max = np.max(features_importances, axis=1)
features_importance_max = np.reshape(features_importance_max, (13, 13))
plt.pcolor(features_importance_max)
plt.title("Feature importance for HoG")
plt.colorbar()
plt.xticks(arange(0.5,13.5), range(1, 14))
plt.yticks(arange(0.5,13.5), range(1, 14))
plt.axis([0, 13, 0, 13])
plt.show()
print('Done Training')
return (clf, columns)
def plotTimeseries(mytimes,myyears,times,mydata,myvar,depthlevels,mytype):
depthlevels=-np.asarray(depthlevels)
ax = figure().add_subplot(111)
y,x = np.meshgrid(depthlevels,times)
mydata=np.rot90(mydata)
if myvar=='temp':
levels = np.arange(-2,16,1)
if myvar=='salt':
levels = np.arange(mydata.min(),mydata.max()+0.1,0.05)
if mytype=="T-CLASS3-IC_CHANGE":
levels = np.arange(mydata.min(),mydata.max()+0.1,0.1)
if mytype=="S-CLASS3-IC_CHANGE":
levels = np.arange(mydata.min(),mydata.max()+0.1,0.05)
print mydata.min(), mydata.max()
cs=contourf(x,y,mydata,levels,cmap=cm.get_cmap('RdBu_r',len(levels)-1))
plt.colorbar(cs)
xticks(mytimes,myyears,rotation=-90)
plotfile='figures/'+str(mytype)+'_'+str(myvar)+'_alldepths.pdf'
plt.savefig(plotfile,dpi=300)
print 'Saved figure file %s\n'%(plotfile)
def test_unimodality_of_GEV(self):
x0 = 1500
mu = 1000
data = np.array([x0])
ksi = np.arange(-2, 2, 0.01)
sigma = np.arange(10, 8000, 10)
n_ksi = len(ksi)
n_sigma = len(sigma)
z = np.zeros((n_ksi, n_sigma))
for i, the_ksi in enumerate(ksi):
for j, the_sigma in enumerate(sigma):
z[i, j] = gevfit.objective_function_stationary_high([the_sigma, mu, the_ksi], data)
sigma, ksi = np.meshgrid(sigma, ksi)
z = np.ma.masked_where(z == gevfit.BIG_NUM, z)
z = np.ma.masked_where(z > 9, z)
plt.figure()
plt.pcolormesh(ksi, sigma, z)
plt.colorbar()
plt.xlabel('$\\xi$')
plt.ylabel('$\\sigma$')
plt.title('$\\mu = %.1f, x = %.1f$' % (mu, x0))
plt.show()
pass
def plot(varName, label, cmap, scale=None):
# the file name is the variable followed by the zero-padded time intex
imageFileName = '%s/%s_%04i.png' % (outFolder, varName, timeIndex)
if (os.path.exists(imageFileName)):
# the image exists so we're going to save time and not replot it
return
# get the variable from the netCDF file
try:
var = ncFile.variables[varName]
except KeyError:
return
# the axes are 'xy', 'xz', or 'yz'
axes = '%s%s' % (var.dimensions[2][1], var.dimensions[1][1])
# get the extent based on the axes
extent = extents[axes]
# aspect ratio
if (axes == 'xy'):
# pixels are 1:1
aspectRatio = None
else:
# stretch the axes to fill the plot area
aspectRatio = 'auto'
field = ncFile.variables[varName][timeIndex, :, :]
missingValue = 9.9692099683868690e36
if (numpy.ma.amax(field) == missingValue):
# the array didnt' get masked properly, so do it manually
field = numpy.ma.masked_array(field,
mask=(field == missingValue),
dtype=float)
else:
# convert from float32 to float64 to avoid overflow/underflow problems
if hasattr(field, 'mask'):
field = numpy.ma.masked_array(field,
mask=field.mask,
dtype=float)
else:
field = numpy.array(field, dtype=float)
# scale the variable if a scale is given
if scale is not None:
field *= scale
# get the plotting limits from the dictionary of limits we created
(lower, upper) = limits[varName]
# make a figure
plt.figure(1, figsize=[16, 9], dpi=100, facecolor='w')
# activate the specified colorbar and set the background color
cmap = plt.get_cmap(cmap)
cmap.set_bad(backgroundColor)
# clear the figure from the last plot
plt.clf()
# plot the data as an image
plt.imshow(field,
extent=extent,
cmap=cmap,
vmin=lower,
vmax=upper,
aspect=aspectRatio,
interpolation='nearest')
plt.colorbar()
plt.title(label)
if (axes == 'xy'):
# y axis will be upside down in imshow, which we don't want for xy
plt.gca().invert_yaxis()
plt.xlabel('x (km)')
plt.ylabel('y (km)')
elif (axes == 'xz'):
# upside-down y axis is okay
plt.xlabel('x (km)')
plt.ylabel('z (m)')
else:
# upside-down y axis is okay
plt.xlabel('y (km)')
plt.ylabel('z (m)')
if (axes in ['xz', 'yz']) and (z[0] < z[-1]):
# flip the y axis
plt.gca().invert_yaxis()
# save the figure as an image
plt.tight_layout()
plt.draw()
plt.savefig(imageFileName, dpi=100)
plt.close()
def plot_image(self, band):
plt.imshow(band, cmap='RdYlGn')
plt.colorbar()
plt.show()
import numpy as np
import matplotlib.pyplot as mp
u = np.linspace(-2.5, 2.5, 501)
x, y = np.meshgrid(u, u)
z = np.sinc(x * y)
mp.gcf().set_facecolor(np.ones(3) * 240 / 255)
mp.subplot(121)
mp.title('Ordinary Contour', fontsize=16)
mp.xlabel('x', fontsize=12)
mp.ylabel('y', fontsize=12)
mp.tick_params(labelsize=10)
mp.grid(linestyle=':')
cntr = mp.contour(x, y, z, 5, cmap='jet')
mp.clabel(cntr, inline_spacing=1, fmt='%.2f', fontsize=8, cmap='jet')
mp.colorbar(cntr).set_label('sinc-2D', fontsize=12)
mp.subplot(122)
mp.title('Filled Contour', fontsize=16)
mp.xlabel('x', fontsize=12)
mp.ylabel('y', fontsize=12)
mp.tick_params(labelsize=10)
mp.grid(linestyle=':')
cntrf = mp.contourf(x, y, z, 20, cmap='jet')
mp.colorbar(cntrf).set_label('sinc-2D', fontsize=12)
mp.tight_layout()
mp.show()
def plot_confusion_matrix(y_true, y_pred, title=None, normalize=False, ax=None):
"""Generates confusion matrix plot for a given set of ground truth labels and classifier predictions.
Args:
y_true (array-like, shape (n_samples)):
Ground truth (correct) target values.
y_pred (array-like, shape (n_samples)):
Estimated targets as returned by a classifier.
title (string, optional): Title of the generated plot. Defaults to "Confusion Matrix" if
`normalize` is True. Else, defaults to "Normalized Confusion Matrix.
normalize (bool, optional): If True, normalizes the confusion matrix before plotting.
Defaults to False.
ax (:class:`matplotlib.axes.Axes`, optional): The axes upon which to plot
the learning curve. If None, the plot is drawn on a new set of axes.
Returns:
ax (:class:`matplotlib.axes.Axes`): The axes on which the plot was drawn.
Example:
>>> import scikitplot.plotters as skplt
>>> rf = RandomForestClassifier()
>>> rf = rf.fit(X_train, y_train)
>>> y_pred = rf.predict(X_test)
>>> skplt.plot_confusion_matrix(y_test, y_pred, normalize=True)
<matplotlib.axes._subplots.AxesSubplot object at 0x7fe967d64490>
>>> plt.show()
.. image:: _static/examples/plot_confusion_matrix.png
:align: center
:alt: Confusion matrix
"""
if ax is None:
fig, ax = plt.subplots(1, 1)
cm = confusion_matrix(y_true, y_pred)
classes = np.unique(y_true)
if normalize:
cm = cm.astype('float') / cm.sum(axis=1)[:, np.newaxis]
cm = np.around(cm, decimals=2)
if title:
ax.set_title(title)
elif normalize:
ax.set_title('Normalized Confusion Matrix')
else:
ax.set_title('Confusion Matrix')
image = ax.imshow(cm, interpolation='nearest', cmap=plt.cm.Blues)
plt.colorbar(mappable=image)
tick_marks = np.arange(len(classes))
ax.set_xticks(tick_marks)
ax.set_xticklabels(classes)
ax.set_yticks(tick_marks)
ax.set_yticklabels(classes)
thresh = cm.max() / 2.
for i, j in itertools.product(range(cm.shape[0]), range(cm.shape[1])):
ax.text(j, i, cm[i, j],
horizontalalignment="center",
color="white" if cm[i, j] > thresh else "black")
ax.set_ylabel('True label')
ax.set_xlabel('Predicted label')
return ax
def show_as_image(sample):
bitmap = sample.reshape((13, 8))
plt.figure()
plt.imshow(bitmap, cmap='gray', interpolation='nearest')
plt.colorbar()
plt.show()
# Select the 0th row: digit
digit = samples[0,:]
# Print digit
print(digit)
# Reshape digit to a 13x8 array: bitmap
bitmap = digit.reshape(13,8)
# Print bitmap
print(bitmap)
# Use plt.imshow to display bitmap
plt.imshow(bitmap, cmap='gray', interpolation='nearest')
plt.colorbar()
plt.show()
##################
def show_as_image(sample):
bitmap = sample.reshape((13, 8))
plt.figure()
plt.imshow(bitmap, cmap='gray', interpolation='nearest')
plt.colorbar()
plt.show()
# Import NMF
from sklearn.decomposition import NMF
def plot_current_field(self,
xlim=None,
flim=None,
log=False,
wrap_order=0):
beam = self
# XXX Not sure why I have to copy, I suspect the fft
e = np.copy(beam.e[int(self.Nt / 2), :, :])
I = beam.intensity_from_field(e)
If = abs(fftshift(beam.fft(e)))**2
fx, fy = beam.get_f()
fx = fftshift(fx)
fy = fftshift(fy)
phase = np.angle(e)
# Images
X = beam.X
Y = beam.Y
ext = [-X / 2, X / 2, -Y / 2, Y / 2]
extf = [fx[0], fx[-1], fy[0], fy[-1]]
plt.figure(figsize=(16, 4), dpi=150)
plt.subplot(131)
plt.imshow(beam.prep_data(I),
aspect='auto',
extent=ext,
cmap='viridis')
cb = plt.colorbar()
cb.set_label(r'Intensity ($10^{14}$ W/cm^2)')
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'$y$ (um)')
if xlim != None:
plt.xlim(xlim)
plt.ylim(xlim)
if wrap_order == 0:
axis0 = 0
axis1 = 1
elif wrap_order == 1:
axis0 = 1
axis1 = 0
plt.subplot(132)
plt.imshow(np.unwrap(np.unwrap(beam.prep_data(phase), axis=axis0),
axis=axis1),
aspect='auto',
extent=ext,
cmap='viridis')
cb = plt.colorbar()
cb.set_label(r'Phase (rad)')
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'$y$ (um)')
if xlim != None:
plt.xlim(xlim)
plt.ylim(xlim)
plt.subplot(133)
plt.imshow(beam.prep_data(If),
aspect='auto',
extent=extf,
cmap='viridis')
cb = plt.colorbar()
cb.set_label(r'Intensity (arb unit)')
plt.xlabel(r'$f_x$ (um$^{-1}$)')
plt.ylabel(r'$f_y$ (um$^{-1}$)')
if flim != None:
plt.xlim(flim)
plt.ylim(flim)
plt.tight_layout()
plt.show()
# Lineouts
# We've already taken the transpose so y is the first index
indy = int(beam.Ny / 2)
indx = int(beam.Nx / 2)
x = beam.x
y = beam.y
plt.figure(figsize=(16, 4), dpi=150)
plt.subplot(131)
plt.plot(x, I[:, indy], label='y')
plt.plot(y, I[indx, :], 'm--', label='x')
plt.legend()
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'Intensity ($10^{14}$ W/cm^2)')
if xlim != None:
plt.xlim(xlim)
plt.subplot(132)
plt.plot(x, np.unwrap(phase[:, indy]), label='x')
plt.plot(y, np.unwrap(phase[indx, :]), 'm--', label='y')
plt.legend()
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'Phase (rad)')
if xlim != None:
plt.xlim(xlim)
plt.subplot(133)
plt.plot(fx, If[:, indy], label='x')
plt.plot(fy, If[indx, :], 'm--', label='y')
plt.legend()
plt.xlabel(r'$f_x$ (um$^{-1}$)')
plt.ylabel(r'Intensity (arb unit)')
if flim != None:
plt.xlim(flim)
plt.tight_layout()
plt.show()
if log == True:
# Lineouts
plt.figure(figsize=(16, 4), dpi=150)
plt.subplot(131)
plt.plot(x, I[:, indy], label='x')
plt.plot(y, I[indx, :], 'm--', label='y')
plt.legend()
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'Intensity ($10^{14}$ W/cm^2)')
plt.yscale('log')
if xlim != None:
plt.xlim(xlim)
plt.subplot(132)
plt.plot(x, np.unwrap(phase[:, indy]), label='x')
plt.plot(y, np.unwrap(phase[indx, :]), 'm--', label='y')
plt.legend()
plt.xlabel(r'$x$ (um)')
plt.ylabel(r'Phase (rad)')
plt.yscale('log')
if xlim != None:
plt.xlim(xlim)
plt.subplot(133)
plt.plot(fx, If[:, indy], label='x')
plt.plot(fy, If[indx, :], 'm--', label='y')
plt.legend()
plt.xlabel(r'$f_x$ (um$^{-1}$)')
plt.ylabel(r'Intensity (arb unit)')
plt.yscale('log')
if flim != None:
plt.xlim(flim)
plt.tight_layout()
plt.show()
async def poisson(
self, interaction: discord.Interaction, team1: str, team2: str, num_games: int = 5, image: bool = False
):
"""Predicts a series between two teams using a poisson process
Args:
team1 (str): Team name
team2 (str): Team name
numGames (int, optional): Number of games in the series (up to 15 games)
image (bool, optional): Whether or not to include a visualization of the poisson distribution
"""
async with interaction.channel.typing():
await interaction.response.defer()
team1 = team1.title()
team2 = team2.title()
try:
league = self.identifier.find_league(team1)
except TypeError:
return await interaction.followup.send(f"Could not understand team: {team1}", ephemeral = True)
try:
if league != self.identifier.find_league(team2):
return await interaction.followup.send("Teams must be from the same league", ephemeral = True)
except TypeError:
return await interaction.followup.send(f"Couldn't understand team: {team2}")
if num_games > 15:
return await interaction.followup.send("To avoid spam and rate limiting, 15 is the maximum number of games supported.", ephemeral = True)
handler = self.poissonHandler
if image:
img: AxesImage = plt.imshow(
handler.generatePoisson(team1, team2, league)[0]
)
plt.title(f"Poisson Distribution: {team1} vs. {team2}", fontsize=16)
cb = plt.colorbar(img, label="Probability of result")
plt.xlabel(f"{team1} Goals", fontsize=10)
plt.ylabel(f"{team2} Goals", fontsize=10)
img.figure.savefig("poisson.png", bbox_inches="tight")
cb.remove() # Remove the colorbar so that it doesn't stay for the next function call
path = os.path.abspath("poisson.png")
file = discord.File(path)
await interaction.followup.send(file=file)
file.close()
os.remove(path)
if not interaction.response.is_done():
await interaction.followup.send(f"{team1} vs. {team2}")
team1Poisson, team2Poisson = handler.getOneWayPoisson(league, team1, team2)
team1Wins = 0
team2Wins = 0
i = 1
while i <= num_games:
team1Goals = np.random.choice([0, 1, 2, 3, 4, 5], p=team1Poisson)
team2Goals = np.random.choice([0, 1, 2, 3, 4, 5], p=team2Poisson)
if team1Goals == team2Goals:
# Redo this loop if tied
continue
elif team1Goals > team2Goals:
await interaction.channel.send(
f"**Game {i} result:** {team1} {team1Goals} - {team2Goals} {team2}"
)
team1Wins += 1
elif team2Goals > team1Goals:
await interaction.channel.send(
f"**Game {i} result:** {team2} {team2Goals} - {team1Goals} {team1}"
)
team2Wins += 1
i += 1
if team1Wins > (num_games / 2):
return await interaction.channel.send(
f"{team1} has won the series with a score of {team1Wins} - {team2Wins}"
)
elif team2Wins > (num_games / 2):
return await interaction.channel.send(
f"{team2} has won the series with a score of {team2Wins} - {team1Wins}"
)
return await interaction.channel.send(
f"The series has ended in a {team1Wins} - {team2Wins} draw. Consider using an odd number of games"
)
import numpy as np
import matplotlib.pyplot as plt
#image_data
a = np.array([
0.313660827978, 0.365348418405, 0.423733120134, 0.365348418405,
0.439599930621, 0.525083754405, 0.423733120134, 0.525083754405,
0.651536351379
]).reshape(3, 3)
plt.imshow(a, interpolation='nearest', cmap='bone',
origin='upper') #upper lower
plt.colorbar(shrink=0.9)
plt.xticks(())
plt.yticks(())
plt.show()
Jcvc_opt = np.load(fname2+"/Jcvc_opt.npy")
Jcve_opt = np.load(fname2+"/Jcve_opt.npy")
Lmc = np.load(fname2+"/Lmc.npy")
Lme = np.load(fname2+"/Lme.npy")
nuc_opt = np.load(fname2+"/nuc_opt.npy")
nue_opt = np.load(fname2+"/nue_opt.npy")
chic_opt = np.load(fname2+"/chic_opt.npy")
chie_opt = np.load(fname2+"/chie_opt.npy")
Jhis[Jhis>=0.5] = 0.5
plt.figure()
X,Y = np.meshgrid(ahis,ehis)
cp = plt.contourf(X,Y,Jhis,20)
#.clabel(cp,colors="white",fmt="%2.1f",fontsize=13)
cb = plt.colorbar(cp)
cb.set_label("optimal estimation error",fontsize=LabelSize)
cb.set_ticks([0.378,0.396,0.414,0.432,0.450,0.468,0.486,0.500])
cb.set_ticklabels([r"0.378",r"0.396",r"0.414",r"0.432",r"0.450",r"0.468",r"0.486",r"$\geq 0.500$"])
plt.xlabel(r"contraction rate $\alpha$",fontsize=LabelSize)
plt.ylabel(r"design parameter $\varepsilon$",fontsize=LabelSize)
#plt.title(tit1,fontsize=FontSize)
fname = "figs/alpeps.pdf"
plt.savefig(fname,bbox_inches='tight',dpi=DPI)
plt.show()
data1 = {'score': np.sum((xhis-zhis)**2,1)}
data2 = {'score': np.sum((x2his-z2his)**2,1)}
data3 = {'score': np.sum((x3his-z3his)**2,1)}
data4 = {'score': np.sum((x4his-z4his)**2,1)}
def sufficient_summary(y, f, out_label=None, opts=None):
"""Make a summary plot with the given predictors and responses.
Parameters
----------
y : ndarray
M-by-1 or M-by-2 matrix that contains the values of the predictors for
the summary plot.
f : ndarray
M-by-1 matrix that contains the corresponding responses
out_label : str, optional
a label for the quantity of interest (default None)
opts : dict, optional
a dictionary with some plot options (default None)
Notes
-----
If `y.shape[1]` is 1, then this function produces only the univariate
summary plot. If `y.shape[1]` is 2, then this function produces both the
univariate and the bivariate summary plot, where the latter is a scatter
plot with the first column of `y` on the horizontal axis, the second
column of `y` on the vertical axis, and the color corresponding to `f`.
"""
if opts == None:
opts = plot_opts()
# check sizes of y
n = y.shape[1]
if n == 1:
y1 = y
elif n == 2:
y1 = y[:,0]
y2 = y[:,1]
else:
raise Exception('Sufficient summary plots cannot be made in more than 2 dimensions.')
# set labels for plots
if out_label is None:
out_label = 'Output'
plt.figure(figsize=(7,7))
plt.rc('font', **opts['myfont'])
plt.plot(y1, f, 'bo', markersize=12)
plt.xlabel('Active variable')
plt.ylabel(out_label)
plt.grid(True)
if opts['savefigs']:
figname = 'figs/ssp1_' + out_label + opts['figtype']
plt.savefig(figname, dpi=300, bbox_inches='tight', pad_inches=0.0)
if n==2:
plt.figure(figsize=(7,7))
plt.rc('font', **opts['myfont'])
plt.scatter(y1, y2, c=f, s=150.0, vmin=np.min(f), vmax=np.max(f))
plt.xlabel('Active variable 1')
plt.ylabel('Active variable 2')
ymin = 1.1*np.amin([np.amin(y1), np.amin(y2)])
ymax = 1.1*np.amax([np.amax(y1), np.amax(y2)])
plt.axis([ymin, ymax, ymin, ymax])
plt.axes().set_aspect('equal')
plt.grid(True)
plt.title(out_label)
plt.colorbar()
if opts['savefigs']:
figname = 'figs/ssp2_' + out_label + opts['figtype']
plt.savefig(figname, dpi=300, bbox_inches='tight', pad_inches=0.0)
show_plot(plt)
rz = 20 * np.ones(nr)
recs = np.vstack((rx, rz))
dr = recs[0, 1] - recs[0, 0]
# Sources
ns = 10
sx = np.linspace(dx * 10, (nx - 10) * dx, ns)
sz = 10 * np.ones(ns)
sources = np.vstack((sx, sz))
ds = sources[0, 1] - sources[0, 0]
plt.figure(figsize=(10, 5))
im = plt.imshow(vel.T, cmap="gray", extent=(x[0], x[-1], z[-1], z[0]))
plt.scatter(recs[0], recs[1], marker="v", s=150, c="b", edgecolors="k")
plt.scatter(sources[0], sources[1], marker="*", s=150, c="r", edgecolors="k")
plt.colorbar(im)
plt.axis("tight")
plt.xlabel("x [m]"), plt.ylabel("y [m]")
plt.title("Velocity")
plt.xlim(x[0], x[-1])
plt.figure(figsize=(10, 5))
im = plt.imshow(refl.T, cmap="gray", extent=(x[0], x[-1], z[-1], z[0]))
plt.scatter(recs[0], recs[1], marker="v", s=150, c="b", edgecolors="k")
plt.scatter(sources[0], sources[1], marker="*", s=150, c="r", edgecolors="k")
plt.colorbar(im)
plt.axis("tight")
plt.xlabel("x [m]"), plt.ylabel("y [m]")
plt.title("Reflectivity")
plt.xlim(x[0], x[-1])
A_B = np.r_[A[:select], B[:select]]
######################################################################
# Before training, the separation between the classes is not recognizable
# in the Gram matrix:
#
gram_before = [[overlaps(init_pars, X1=[x1], X2=[x2]) for x1 in A_B]
for x2 in A_B]
ax = plt.subplot(111)
im = ax.matshow(gram_before, vmin=0, vmax=1)
divider = make_axes_locatable(ax)
cax = divider.append_axes("right", size="5%", pad=0.05)
plt.colorbar(im, cax=cax)
plt.show()
######################################################################
# After training, the gram matrix clearly separates the two classes.
#
gram_after = [[overlaps(pretrained_pars, X1=[x1], X2=[x2]) for x1 in A_B]
for x2 in A_B]
ax = plt.subplot(111)
im = ax.matshow(gram_after, vmin=0, vmax=1)
divider = make_axes_locatable(ax)
cax = divider.append_axes("right", size="5%", pad=0.05)
plt.colorbar(im, cax=cax)
plt.show()
data_set = pd.read_csv('Rap.csv') # Считываем данные SCV-файла с DataSet'ом
bpm = data_set['bpm'] # Переменная для параметра BPM в каждой строке
year = data_set['year'] # Переменная для параметра "год релиза" в каждой строке
plt.scatter( # Построение точечного графика и его настройка
bpm, year,
c=bpm,
s=bpm*1.5,
cmap='gist_heat',
edgecolor='black',
linewidth=.7
)
bar = plt.colorbar( # Построение шкалы BPM
orientation='horizontal',
shrink=0.8,
extend='both',
extendfrac=.1
)
bar.set_label('Шкала ударов в минуту', fontsize=18) # Подпись шкалы
plt.title('Популярность скорости ' # Заголовок графика
'исполнения в Rap\'е ', fontsize=25)
plt.xlabel('BPM', fontsize=18) # Ось абсцисс
plt.ylabel('Год релиза', fontsize=18) # Ось ординат
plt.tight_layout() # Настройка параметров подзаголовков в области отображения
plt.show() # Вывод на экран
# 加载数据集
feature=np.load('./checkpoints/20190424-2211/max/feature_fcgan.npy')
#feature=np.random.rand(20000,100)
t_features=[]
t_labels=[]
for i in range(len(randIdx)):
t_features.append(feature[randIdx[i]])
t_labels.append(y_labels[randIdx[i]])
#print(t_feature.sum())
print(np.shape(t_features))
print(np.shape(t_labels))
iris = load_iris()
# 共有150个例子， 数据的类型是numpy.ndarray
print(iris.data.shape)
# 对应的标签有0,1,2三种
print(iris.target)
# 使用TSNE进行降维处理。从4维降至2维。
#tsne = TSNE(n_components=2, learning_rate=100).fit_transform(feature)
tsne = TSNE(n_components=2, learning_rate=100).fit_transform(t_features)
# 使用PCA 进行降维处理
pca = PCA().fit_transform(t_features)
# 设置画布的大小
plt.figure(figsize=(12, 6))
plt.subplot(121)
plt.scatter(tsne[:, 0], tsne[:, 1], c=t_labels)
plt.subplot(122)
plt.scatter(pca[:, 0], pca[:, 1], c=t_labels)
plt.colorbar()#使用这一句就可以分辨出，颜色对应的类了！神奇啊。
plt.savefig('plot.pdf')
# Plot up the 'Old-Fashioned Way' - Using matplotlib.pyplot pcolormesh
import numpy as np
fig = plt.figure(figsize=(16, 12))
ax = fig.add_subplot(1, 1, 1, projection=ccrs.PlateCarree())
ax.set_extent((-100, -60, 16, 52), crs=ccrs.PlateCarree())
im = ax.pcolormesh(oceanSST['longitude'].values,
oceanSST['latitude'].values,
oceanSST['Band15'][0].values,
cmap='jet',
transform=ccrs.PlateCarree(),
vmin=250,
vmax=300)
ax.add_feature(cf.COASTLINE)
ax.add_feature(cf.BORDERS)
plt.colorbar(im, label="Degrees Kelvin")
# Plot lat / lon ticks
plt.xticks(
np.arange(np.min(oceanSST['longitude'].values),
np.max(oceanSST['longitude'].values), 10))
plt.yticks(
np.arange(np.min(oceanSST['latitude'].values),
np.max(oceanSST['latitude'].values), 10))
# Plot x/y labels
plt.xlabel("Longitude")
plt.ylabel("Latitude")
# Plot Title
plt.title("Band 15 Brightness Temperature")
# What about SST?
# This time we'll plot with the handy-dandy xarray plotting function
def plot_confusion_matrix(phase, path, class_names):
"""Plots the confusion matrix using matplotlib.
Parameter
---------
phase : str
String value indicating for what phase is the confusion matrix, i.e. training/validation/testing
path : str
Directory where the predicted and actual label NPY files reside
class_names : str
List consisting of the class names for the labels
Returns
-------
conf : array, shape = [num_classes, num_classes]
Confusion matrix
accuracy : float
Predictive accuracy
"""
# list all the results files
files = list_files(path=path)
labels = np.array([])
for file in files:
labels_batch = np.load(file)
labels = np.append(labels, labels_batch)
if (files.index(file) / files.__len__()) % 0.2 == 0:
print("Done appending {}% of {}".format(
(files.index(file) / files.__len__()) * 100, files.__len__()))
labels = np.reshape(labels, newshape=(labels.shape[0] // 4, 4))
print("Done appending NPY files.")
# get the predicted labels
predictions = labels[:, :2]
# get the actual labels
actual = labels[:, 2:]
# create a TensorFlow session
with tf.Session() as sess:
# decode the one-hot encoded labels to single integer
predictions = sess.run(tf.argmax(predictions, 1))
actual = sess.run(tf.argmax(actual, 1))
# get the confusion matrix based on the actual and predicted labels
conf = confusion_matrix(y_true=actual, y_pred=predictions)
# create a confusion matrix plot
plt.imshow(conf, cmap=plt.cm.Purples, interpolation="nearest")
# set the plot title
plt.title("Confusion Matrix for {} Phase".format(phase))
# legend of intensity for the plot
plt.colorbar()
tick_marks = np.arange(len(class_names))
plt.xticks(tick_marks, class_names, rotation=45)
plt.yticks(tick_marks, class_names)
plt.tight_layout()
plt.ylabel("Actual label")
plt.xlabel("Predicted label")
# show the plot
plt.show()
# get the accuracy of the phase
accuracy = (conf[0][0] + conf[1][1]) / labels.shape[0]
# return the confusion matrix and the accuracy
return conf, accuracy
def plot():
detName = "conf/P42574A_grad%0.2f_pcrad%0.2f_pclen%0.2f.conf" % (0.05, 2.5,
1.65)
det = Detector(detName, timeStep=1, numSteps=10)
data = np.loadtxt("posterior_sample.txt")
num_samples = len(data)
print "found %d samples" % num_samples
r_arr = np.empty(num_samples)
z_arr = np.empty(num_samples)
h_100_mu0 = np.empty(num_samples)
h_100_beta = np.empty(num_samples)
h_100_e0 = np.empty(num_samples)
h_111_mu0 = np.empty(num_samples)
h_111_beta = np.empty(num_samples)
h_111_e0 = np.empty(num_samples)
tf = np.empty((6, num_samples))
for (idx, params) in enumerate(data):
rad, phi, theta, scale, t0, smooth = params[:6]
r_arr[idx] = rad * np.cos(theta)
z_arr[idx] = rad * np.sin(theta)
h_100_mu0[idx], h_100_beta[idx], h_100_e0[idx], h_111_mu0[
idx], h_111_beta[idx], h_111_e0[idx] = params[
velo_first_idx:velo_first_idx + 6]
tf[:, idx] = params[tf_first_idx:tf_first_idx + 6]
positionFig = plt.figure(0)
plt.clf()
xedges = np.linspace(0, np.around(det.detector_radius, 1),
np.around(det.detector_radius, 1) * 10 + 1)
yedges = np.linspace(0, np.around(det.detector_length, 1),
np.around(det.detector_length, 1) * 10 + 1)
plt.hist2d(r_arr, z_arr, norm=LogNorm(), bins=[xedges, yedges])
plt.colorbar()
plt.xlabel("r from Point Contact (mm)")
plt.ylabel("z from Point Contact (mm)")
plotnum = 600
veloFig = plt.figure(1)
tf0 = veloFig.add_subplot(plotnum + 11)
tf1 = veloFig.add_subplot(plotnum + 12, )
tf2 = veloFig.add_subplot(plotnum + 13, )
tf3 = veloFig.add_subplot(plotnum + 14, )
tf4 = veloFig.add_subplot(plotnum + 15, )
tf5 = veloFig.add_subplot(plotnum + 16, )
tf0.set_ylabel('h_100_mu0')
tf1.set_ylabel('h_100_beta')
tf2.set_ylabel('h_100_e0')
tf3.set_ylabel('h_111_mu0')
tf4.set_ylabel('h_111_beta')
tf5.set_ylabel('h_111_e0')
num_bins = 100
[n, b, p] = tf0.hist(h_100_mu0, bins=num_bins)
[n, b, p] = tf1.hist(h_100_beta, bins=num_bins)
[n, b, p] = tf2.hist(h_100_e0, bins=num_bins)
[n, b, p] = tf3.hist(h_111_mu0, bins=num_bins)
[n, b, p] = tf4.hist(h_111_beta, bins=num_bins)
[n, b, p] = tf5.hist(h_111_e0, bins=num_bins)
plotnum = 600
tfFig = plt.figure(2)
tf0 = tfFig.add_subplot(plotnum + 11)
tf1 = tfFig.add_subplot(plotnum + 12, )
tf2 = tfFig.add_subplot(plotnum + 13, )
tf3 = tfFig.add_subplot(plotnum + 14, )
tf4 = tfFig.add_subplot(plotnum + 15, )
tf5 = tfFig.add_subplot(plotnum + 16, )
tf0.set_ylabel('b_ov_a')
tf1.set_ylabel('c')
tf2.set_ylabel('d')
tf3.set_ylabel('rc1')
tf4.set_ylabel('rc2')
tf5.set_ylabel('rcfrac')
num_bins = 100
[n, b, p] = tf0.hist(tf[0, :], bins=num_bins)
[n, b, p] = tf1.hist(tf[1, :], bins=num_bins)
[n, b, p] = tf2.hist(tf[2, :], bins=num_bins)
[n, b, p] = tf3.hist(tf[3, :], bins=num_bins)
[n, b, p] = tf4.hist(tf[4, :], bins=num_bins)
[n, b, p] = tf5.hist(tf[5, :], bins=num_bins)
plt.show()
format='%.0e')
#plt.contourf(x,y,data,ticks3,norm=colors.LogNorm(vmin=1e-5,vmax=8e4),cmap='RdYlBu_r', format = '%.0e')
#plt.contourf(x,y,data,ticks3,norm=colors.LogNorm(vmin=pow(10,1),vmax=pow(10,6)),cmap=plt.cm.jet,resolution='c', format = '%.0e')
#plt.clim((pow(10,3),pow(10,7)))
plt.plot(lat1, trop_height.data, 'k--')
mn = 0.1
mx = 100000
md = (mx - mn) / 2
print('\nThe maximum value of particle number is = ',
np.max(data))
print('\nThe mean value of particle number at 11.5km = ',
np.mean(data[39, :]), '\n')
#plt.contourf(x,y,data,cmap=,resolution='c')
formatter = LogFormatter(10, labelOnlyBase=False)
cbar = plt.colorbar()
#cbar=plt.colorbar(ticks=ticks3, format=formatter)
#cbar.set_ticks(ticks4)
cbar.set_ticks(ticks5)
#ticks3=['1','5','10','20','50','1E2','2e2','5e2','1e3','2e3','5e3','1e4','3e4','6e4','1e5','2e5']
cbar.set_ticklabels(ticks5_label)
#cbar.set_ticklabels(ticks3_label)
#plt.yticks(['1','10'])
#plt.clim((pow(10,3),pow(10,7)))
plt.xlabel('latitude')
plt.ylabel('altitude (km)')
#plt.title('Total Particle number concentration (cm'+u'\u207B\u00B3'+')')
plt.title('Change in Particle number concentration (cm' +
u'\u207B\u00B3' + ') - PD')
def plot_event(self, event):
self.event = event
self.fig = plt.figure(figsize=(15, 12))
x_pad = 0.04
y_pad = 0.05
extra_y_pad_top = -0.02
extra_x_pad_left = 0.02
y_sep_middle = 0.06
start_x = x_pad + extra_x_pad_left
start_y = y_pad
full_x = 1 - x_pad - start_x
full_y = 1 - y_pad - start_y - y_sep_middle - extra_y_pad_top
row_y = full_y / 4
column_x = full_y / 4
title = 'Event %s from %s' % (event.event_number, event.dataset_name)
plt.suptitle(title, fontsize=16, horizontalalignment='right', x=0.99)
##
# Channel waveforms plot
##
self.channel_wv_ax = plt.axes([start_x, start_y, full_x, row_y])
q = PlotChannelWaveforms2D(self.config, self.processor)
q.plot_event(event, ax=self.channel_wv_ax)
self.chwvs_2s_time_scale = q.time_scale
# TODO: Make top, bottom, veto yticks on right y axis?
##
# Event waveform plot
##
event_wv_ax = plt.axes([start_x, start_y + row_y, full_x, row_y],
sharex=self.channel_wv_ax)
q = PlotSumWaveformEntireEvent(self.config, self.processor)
q.plot_event(event, show_legend=True, ax=event_wv_ax)
event_wv_ax.get_xaxis().set_visible(False)
##
# Whereami plot
##
whereami_height = 0.01
self.whereami_ax = plt.axes(
[start_x, start_y + 2 * row_y, full_x, whereami_height],
sharex=self.channel_wv_ax)
self.whereami_ax.set_axis_off()
##
# Event and peak text
##
x_sep_text = 0.07
y_sep_text = 0.05
x = start_x + 2 * column_x + x_sep_text
y = start_y + 4 * row_y + y_sep_middle - y_sep_text
event_text = ''
event_text += 'Event recorded at %s UTC, %09d ns\n' % (
epoch_to_human_time(
self.trigger_time_ns), self.trigger_time_ns % units.s)
# suspicious_channels = np.where(event.is_channel_suspicious)[0]
# event_text += 'Suspicious channels (# hits rejected):\n ' + ', '.join([
# '%s (%s)' % (ch, event.n_hits_rejected[ch]) for ch in suspicious_channels]) + '\n'
self.fig.text(x,
y,
self.wrap_multiline(event_text, self.max_characters),
verticalalignment='top')
self.peak_text = self.fig.text(x,
start_y + 3 * row_y + y_sep_middle,
'',
verticalalignment='top')
##
# Peak hitpatterns
##
y = start_y + 2 * row_y + y_sep_middle
self.bot_hitp_ax = plt.axes([start_x, y, column_x, row_y])
self.top_hitp_ax = plt.axes([start_x, y + row_y, column_x, row_y],
sharex=self.bot_hitp_ax)
self.top_hitp_ax.get_xaxis().set_visible(False)
##
# Get the TPC peaks
##
# Did the user specify a peak number? If so, get it
self.peak_i = self.starting_peak_per_event.get(event.event_number,
None)
self.peaks = event.get_peaks_by_type(detector='tpc',
sort_key='left',
reverse=False)
self.peaks = [p for p in self.peaks if p.type != 'lone_hit']
if len(self.peaks) == 0:
self.log.debug(
"No peaks in this event, will be a boring peakviewer plot...")
return event
##
# Peak Waveforms
##
x_sep = 0.03
x = start_x + column_x + x_sep
self.peak_chwvs_ax = plt.axes([x, y, column_x - x_sep, row_y])
self.peak_chwvs_ax.yaxis.tick_right()
self.peak_chwvs_ax.yaxis.set_label_position("right")
self.peak_sumwv_ax = plt.axes([x, y + row_y, column_x - x_sep, row_y],
sharex=self.peak_chwvs_ax)
self.peak_sumwv_ax.yaxis.tick_right()
self.peak_sumwv_ax.yaxis.set_label_position("right")
self.peak_sumwv_ax.get_xaxis().set_visible(False)
q = PlotChannelWaveforms2D(self.config, self.processor)
q.plot_event(event,
ax=self.peak_chwvs_ax,
show_channel_group_labels=False)
##
# Buttons
##
x = start_x + 2 * column_x + x_sep
button_width = 0.08
button_height = 0.03
buttons_x_space = 0.04
self.make_button([x, y, button_width, button_height], 'Prev peak',
self.draw_prev_peak)
self.make_button([x + button_width, y, button_width, button_height],
'Next peak', self.draw_next_peak)
self.make_button([
x + 2 * button_width + buttons_x_space, y, button_width,
button_height
], 'Main S1', self.draw_main_s1)
self.make_button([
x + 3 * button_width + buttons_x_space, y, button_width,
button_height
], 'Main S2', self.draw_main_s2)
##
# Select and draw the desired peak
##
if event.event_number in self.starting_peak_per_event:
# The user specified the left boundary of the desired starting peak
desired_left = self.starting_peak_per_event[event.event_number]
self.peak_i = np.argmin(
[np.abs(p.left - desired_left) for p in self.peaks])
if self.peaks[self.peak_i].left != desired_left:
self.log.warning(
'There is no (tpc, non-lone-hit) peak starting at index %d! '
'Taking closest peak (%d-%d) instead.' %
(desired_left, self.peaks[self.peak_i].left,
self.peaks[self.peak_i].right))
self.log.debug("Selected user-defined peak %d" % self.peak_i)
self.draw_peak()
elif self.starting_peak == 'first':
self.peak_i = 0
self.draw_peak()
elif self.starting_peak == 'main_s1':
self.draw_main_s1()
elif self.starting_peak == 'main_s2':
self.draw_main_s2()
if self.peak_i is None:
# Either self.starting_peak is 'largest' or one of the other peak selections failed
# (e.g. couldn't draw the main s1 because there is no S1)
# Just pick the largest peak (regardless of its type)
self.peak_i = np.argmax([p.area for p in self.peaks])
self.log.debug("Largest peak is %d (peak list runs from 0-%d)" %
(self.peak_i, len(self.peaks) - 1))
self.draw_peak()
# Draw the color bar for the top or bottom hitpattern plot (they share them)
# In the rare case the top has no data points, take it from the bottom
sc_for_hitp = self.top_hitp_sc if self.peaks[
self.peak_i].area_fraction_top != 0 else self.bot_hitp_sc
plt.colorbar(sc_for_hitp, ax=[self.top_hitp_ax, self.bot_hitp_ax])
r_max, g_r_max = find_local_maxima(r, g_r_t[j], r_guess=0.45)
plt.plot(r_max, g_r_max, 'k.')
plt.plot(r, g_r_t[j], label='{:.3f} ps'.format(t[j]))
# Save output to text files
np.savetxt('vhf.txt', g_r_t)
np.savetxt('r.txt', r)
np.savetxt('t.txt', t)
ax.set_xlim((0, 0.8))
ax.set_ylim((0, 3.0))
ax.legend(loc=0)
ax.set_xlabel(r'Radial coordinate, $r$, $nm$')
ax.set_ylabel(r'Van Hove Function, , $g(r, t)$, $unitiless$')
plt.savefig('van-hove-function.pdf')
fig, ax = plt.subplots()
heatmap = ax.imshow(g_r_t-1, vmin=-0.04, vmax=0.04, cmap='RdYlGn_r', origin='lower', extent=(r[0], r[-1], t[0], t[-1]))
ax.grid(False)
ax.set_xlabel(r'Radial position, $r$, $nm$')
ax.set_ylabel(r'Time, $t$, $ps$')
colorbar = plt.colorbar(heatmap)
colorbar.set_label(r'$g(r, t) - 1$', rotation=270)
fig.savefig('heatmap.pdf')
def plot_hex_map(d_matrix,
titles=[],
colormap=cm.gray,
shape=[1, 1],
comp_width=5,
hex_shrink=1.0,
fig=None,
colorbar=True):
"""
Plot hexagon map where each neuron is represented by a hexagon. The hexagon
color is given by the distance between the neurons (D-Matrix)
Args:
- grid: Grid dictionary (keys: centers, x, y ),
- d_matrix: array contaning the distances between each neuron
- w: width of the map in inches
- title: map title
Returns the Matplotlib SubAxis instance
"""
d_matrix = np.flip(d_matrix, axis=0)
def create_grid_coordinates(x, y):
coordinates = [
x for row in -1 * np.array(list(range(x))) for x in list(
zip(np.arange(((row) % 2) * 0.5, y +
((row) % 2) * 0.5), [0.8660254 * (row)] * y))
]
return (np.array(list(reversed(coordinates))), x, y)
if d_matrix.ndim < 3:
d_matrix = np.expand_dims(d_matrix, 2)
if len(titles) != d_matrix.shape[2]:
titles = [""] * d_matrix.shape[2]
n_centers, x, y = create_grid_coordinates(*d_matrix.shape[:2])
# Size of figure in inches
if fig is None:
xinch, yinch = comp_width * shape[1], comp_width * (x / y) * shape[0]
fig = plt.figure(figsize=(xinch, yinch), dpi=72.)
for comp, title in zip(range(d_matrix.shape[2]), titles):
ax = fig.add_subplot(shape[0], shape[1], comp + 1, aspect='equal')
# Get pixel size between two data points
xpoints = n_centers[:, 0]
ypoints = n_centers[:, 1]
ax.scatter(xpoints, ypoints, s=0.0, marker='s')
ax.axis([
min(xpoints) - 1.,
max(xpoints) + 1.,
min(ypoints) - 1.,
max(ypoints) + 1.
])
xy_pixels = ax.transData.transform(np.vstack([xpoints, ypoints]).T)
xpix, ypix = xy_pixels.T
# discover radius and hexagon
apothem = hex_shrink * (xpix[1] - xpix[0]) / math.sqrt(3)
area_inner_circle = math.pi * (apothem**2)
dm = d_matrix[:, :, comp].reshape(np.multiply(*d_matrix.shape[:2]))
collection_bg = RegularPolyCollection(
numsides=6, # a hexagon
rotation=0,
sizes=(area_inner_circle, ),
array=dm,
cmap=colormap,
offsets=n_centers,
transOffset=ax.transData,
)
ax.add_collection(collection_bg, autolim=True)
ax.axis('off')
ax.autoscale_view()
ax.set_title(title) #, fontdict={"fontsize": 3 * comp_width})
divider = make_axes_locatable(ax)
cax = divider.append_axes("right", size="5%", pad=0.05)
cbar = plt.colorbar(collection_bg, cax=cax)
if not colorbar:
cbar.remove()
#cbar.ax.tick_params(labelsize=3 * comp_width)
return ax, list(reversed(n_centers))
def add_fault(c, velocity, fill_fault=True, plot=False):
"add a fault to a velocity model"
# fault parameters
m_range = c.fm_m_range
x0_range = c.fm_x0_range
y0_range = c.fm_y0_range
y_start_range = c.fm_y_start_range
y_shift_range = c.fm_y_shift_range
fault_width = c.fm_fault_width
fault_velocity = c.fm_fault_velocity
# sample distributions
m = np.random.uniform(m_range[0], m_range[1])
if np.random.random() > 0.5: m *= -1
x0, y0 = (np.random.randint(x0_range[0], x0_range[1]),
np.random.randint(y0_range[0], y0_range[1]))
y_start = np.random.randint(y_start_range[0], y_start_range[1])
y_shift = -np.random.randint(y_shift_range[0], y_shift_range[1])
y_range = (y_start, y_start + velocity.shape[1])
if plot: print(m, (x0, y0), y_range, y_shift)
# derived parameters
c = y0 - m * x0 # for selecting slab masks
delta_y = int(y_shift) # for actually shifting the fault (rounded)
delta_x = int(np.round(y_shift / m))
# pad y by delta_y
# pad x by delta_x # both these may over-pad (for code simplicity)
pad_x, pad_y = np.abs(delta_x), np.abs(delta_y)
v_pad = np.pad(np.copy(velocity), [(pad_x, pad_x), (pad_y, pad_y)], 'edge')
# get fault block masks
slab_mask = np.zeros(v_pad.shape)
empty_mask = np.zeros(v_pad.shape)
reverse = False
if np.random.random() > 0.5: reverse = True
for xval, col in enumerate(v_pad):
for yval, _ in enumerate(col):
if ((m * (xval - pad_x) + c < (yval - pad_y) and reverse)
or (m * (xval - pad_x) + c >
(yval - pad_y) and not reverse)):
if (y_range[0] < (yval - pad_y) <= y_range[1]):
slab_mask[xval, yval] = 1 # just fills slab
if ((y_range[0] - pad_y) < (yval - pad_y) <= y_range[1]):
empty_mask[xval,
yval] = 1 # fills upwards to include delta_y
# shift blocks
slab = v_pad * slab_mask
#order ensures no interpolation, origin is origin in original image (which is shifted to 0,0 in output)
slab_shift = scipy.ndimage.affine_transform(slab,
np.diag((1, 1)),
(delta_x, delta_y),
order=0)
empty_mask_shift = scipy.ndimage.affine_transform(empty_mask,
np.diag((1, 1)),
(delta_x, delta_y),
order=0)
v_pad_shift = v_pad * (1 - empty_mask_shift) + slab_shift
# fill zeros, by whatever is above slab
found = False
fill_value = np.mean(velocity)
for yval in np.arange(v_pad.shape[1]):
row = slab_mask[:, yval]
for xval, val in enumerate(row):
if val == 1 and yval != 0:
fill_value = v_pad[xval, yval - 1]
found = True
break
if found: break
v_pad_fill = np.copy(v_pad_shift)
for xval, col in enumerate(v_pad_shift):
for yval, vval in enumerate(col):
if vval == 0:
v_pad_fill[xval, yval] = fill_value
# add fault block
x_fault = ((yval - pad_y - c) / m)
if (fill_fault and y_range[0] < (yval - pad_y) <=
(y_range[1] + pad_y)
and (x_fault - fault_width <
(xval - pad_x) <= x_fault + fault_width)):
v_pad_fill[xval, yval] = fault_velocity
# crop
v_fill = v_pad_fill[pad_x:-pad_x, pad_y:-pad_y]
# optionally plot
if plot:
x = np.arange(velocity.shape[0])
plt.figure()
plt.imshow(velocity.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x, m * x + c)
plt.scatter(x0, y0)
plt.scatter((y_range[0] - c) / m, y_range[0])
plt.scatter((y_range[1] - y_shift - c) / m, y_range[1] - y_shift)
plt.xlim(0, velocity.shape[0])
plt.ylim(velocity.shape[1], 0)
x_pad = np.arange(v_pad.shape[0])
plt.figure()
plt.imshow(v_pad.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(slab_mask.T)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(empty_mask.T)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(slab_shift.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(empty_mask_shift.T)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(v_pad_shift.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(v_pad_fill.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x_pad, m * (x_pad - pad_x) + c + pad_y)
plt.scatter(x0 + pad_x, y0 + pad_y)
plt.xlim(0, v_pad.shape[0])
plt.ylim(v_pad.shape[1], 0)
plt.figure()
plt.imshow(v_fill.T, vmin=0, vmax=3500)
plt.colorbar()
plt.plot(x, m * x + c)
plt.scatter(x0, y0)
plt.scatter((y_range[0] - c) / m, y_range[0])
plt.scatter((y_range[1] - y_shift - c) / m, y_range[1] - y_shift)
plt.xlim(0, velocity.shape[0])
plt.ylim(velocity.shape[1], 0)
return v_fill
)
processed_dataset = processor.apply_operations(dataset=dataset)
# %%
# The plot of the simulation. Because we configured the simulator object to simulate
# spectrum per spin system, the following dataset is a CSDM object containing five
# simulations (dependent variables). Let's visualize the first dataset corresponding to
# :math:`\text{NiCl}_2\cdot 2 \text{D}_2\text{O}`.
dataset_Ni = dataset.split()[0].real
plt.figure(figsize=(4.25, 3.0))
ax = plt.subplot(projection="csdm")
cb = ax.imshow(dataset_Ni / dataset_Ni.max(), aspect="auto", cmap="gist_ncar_r")
plt.title(None)
plt.colorbar(cb)
plt.tight_layout()
plt.show()
# %%
# The plot of the simulation after signal processing.
proc_dataset_Ni = processed_dataset.split()[0].real
plt.figure(figsize=(4.25, 3.0))
ax = plt.subplot(projection="csdm")
cb = ax.imshow(
proc_dataset_Ni / proc_dataset_Ni.max(), cmap="gist_ncar_r", aspect="auto"
)
plt.title(None)
plt.colorbar(cb)
from numpy import genfromtxt, shape
from matplotlib.pyplot import figure, pcolormesh, streamplot, savefig, colorbar
D = genfromtxt('salida.txt', delimiter=',')
D = D[:, :-1] # Retirar ultima columna de nans
n1, n2 = shape(D) # Contar datos
# Separar datos
n = int(n1 / 3)
P = D[:n, :]
Ex = D[n:2 * n, :]
Ey = D[2 * n:3 * n, :]
print(shape(P), shape(Ex), shape(Ey))
XY = genfromtxt('XY.txt', delimiter=',')
XY = XY[:, :-1] # Retirar ultima columna de nans
# Separar datos
X = XY[:n, :]
Y = XY[n:2 * n, :]
print(shape(X), shape(Y))
figure()
pcolormesh(X, Y, P)
colorbar()
streamplot(X, Y, Ex, Ey, density=1.5, color='k')
savefig('placas.pdf')
BCoffset = int(xsize/20)
# replacing all boundaries with nan to get location of vortices
Usquare[0:BCoffset,:] = nan ; Usquare[:,0:BCoffset] = nan
Usquare[xsize_max-BCoffset:xsize,:] = nan;Usquare[:,ysize_max-BCoffset:ysize] = nan
Loc1_lbm = np.unravel_index(np.nanargmin(Usquare),Usquare.shape)
# finding other vortices
Usquare[Loc1_lbm[0]-offset2:Loc1_lbm[0]+offset2,Loc1_lbm[1]-offset2:Loc1_lbm[1]+offset2] = nan
Loc2_lbm = np.unravel_index(np.nanargmin(Usquare),Usquare.shape)
Usquare[Loc2_lbm[0]-offset2:Loc2_lbm[0]+offset2,Loc2_lbm[1]-offset2:Loc2_lbm[1]+offset2] = nan
Loc3_lbm = np.unravel_index(np.nanargmin(Usquare),Usquare.shape)
Usquare[Loc3_lbm[0]-offset2:Loc3_lbm[0]+offset2,Loc3_lbm[1]-offset2:Loc3_lbm[1]+offset2] = nan
Loc4_lbm = np.unravel_index(np.nanargmin(Usquare),Usquare.shape)
color1 = (np.sqrt(u_lbm[0,:,:]**2+u_lbm[1,:,:]**2)/uLB ).transpose()
strm = subplot1.streamplot(XNorm,YNorm,(u_lbm[0,:,:]).transpose(),(u_lbm[1,:,:]).transpose(), color =color1,cmap=pyplot.cm.jet)#,norm=matplotlib.colors.Normalize(vmin=0,vmax=1))
cbar = pyplot.colorbar(strm.lines, ax = subplot1)
subplot1.plot(Loc1_lbm[0]/xsize,(ysize_max-Loc1_lbm[1])/ysize,'mo', label='Vortex1')
subplot1.plot(Loc2_lbm[0]/xsize,(ysize_max-Loc2_lbm[1])/ysize,'mo', label='Vortex2')
subplot1.plot(Loc3_lbm[0]/xsize,(ysize_max-Loc3_lbm[1])/ysize,'mo', label='Vortex2')
subplot1.plot(Loc4_lbm[0]/xsize,(ysize_max-Loc4_lbm[1])/ysize,'mo', label='Vortex2')
subplot1.plot(X_Vor, Y_Vor,'rs', label='Ghia',alpha=1)
subplot1.set_title('Velocity Streamlines - LBM', fontsize = 23, y =1.02)
subplot1.margins(0.005) #subplot3.axis('tight')
subplot1.set_xlabel('X-position', fontsize = 20);subplot1.set_ylabel('Y-position', fontsize = 20)
color2 = (np.sqrt(u[0,:,:]**2+u[1,:,:]**2)/uLB ).transpose()
strm = subplot2.streamplot(XNorm,YNorm,(u[0,:,:]).transpose(),(u[1,:,:]).transpose(), color =color2,cmap=pyplot.cm.jet)#,norm=matplotlib.colors.Normalize(vmin=0,vmax=1))
cbar = pyplot.colorbar(strm.lines, ax = subplot2)
subplot2.plot(Loc1[0]/xsize,(ysize_max-Loc1[1])/ysize,'mo', label='Vortex1')
subplot2.plot(Loc2[0]/xsize,(ysize_max-Loc2[1])/ysize,'mo', label='Vortex2')
subplot2.plot(Loc3[0]/xsize,(ysize_max-Loc3[1])/ysize,'mo', label='Vortex2')
# axs[idx_plot].scatter(y_test, y_hat, s=1.7)
nbins = 300
k = kde.gaussian_kde([y_test, y_hat])
xi, yi = np.mgrid[
y_test.min() : y_test.max() : nbins * 1j,
y_hat.min() : y_hat.max() : nbins * 1j,
]
zi = k(np.vstack([xi.flatten(), yi.flatten()]))
im = axs[idx_plot].pcolormesh(xi, yi, zi.reshape(xi.shape), cmap="cividis")
# e = f.colorbar(matplotlib.cm.ScalarMappable(), ax=axs[idx_plot])
fmt = matplotlib.ticker.ScalarFormatter()
fmt.set_scientific(True)
fmt.set_powerlimits((-2, 4))
plt.colorbar(im, ax=axs[idx_plot], format=fmt)
axs[idx_plot].set_ylabel(f"Pred. {LABEL_GUIDE[data]}")
axs[idx_plot].set_xlabel(f"Exp. {LABEL_GUIDE[data]}")
# axs[idx_plot].grid(alpha=0.5)
# cyp values
y_test = []
y_hat = []
aucs = []
for idx_split in range(N_FOLDS):
y = np.load(
os.path.join(DATA_PATH, "cyp", f"cyp_noHs_y_fold{idx_split}.npy")
print(nc)
for i in nc.variables:
print(i, nc.variables[i].units, nc.variables[i].shape)
lons = nc.variables['lon'][:]
lats = nc.variables['lat'][:]
time = nc.variables['time'][:]
qv2m = nc.variables['qv_2m'][:]
t_units = nc.variables['time'].units
datevar = num2date(time[:], units='hours since 1970-01-01 00:00:00', calendar='standard')
print(datevar[:])
map = Basemap(projection='merc', llcrnrlon=lons[0], llcrnrlat=lats[0], urcrnrlon=lons[599], urcrnrlat=lats[698],
resolution='i')
lon2, lat2 = np.meshgrid(lons, lats)
x, y = map(lon2, lat2)
my_cmap = plt.get_cmap('rainbow')
plt.gca().set_axis_off()
plt.subplots_adjust(top=1, bottom=0, right=1, left=0,
hspace=0, wspace=0)
plt.margins(0, 0)
map.pcolormesh(x, y, qv2m[0, :, :], cmap='rainbow_r')
#plt.colorbar(label="2-m Mixing Ratio") # comment out later
for b in range(0, 31):
map.pcolormesh(x, y, qv2m[b, :, :], cmap='rainbow_r')
#plt.title('2-m Mixing Ratio on %s' % datevar[b]) # comment out later
cb = plt.colorbar();
cb.remove();
plt.draw();
plt.savefig("qv_2m_monthly_mean_d02_2009-2018_%s.png" % b, transparent='True',
bbox_inches='tight', pad_inches=0)
print('saved %s' % b)
print len(R)
print len(Z)
# Plot A
#------------------------------------------------------------
plt.figure(figsize=(12, 8))
#plt.contourf(array with size x, array with size y, matrix with size x*y, Number of colors, choose a color map)
plt.contourf(R, Z, Ca, NoColors, cmap=cmap)
plt.xlim((xmin, xmax))
plt.ylim((ymin, ymax))
#plt.clim((0, 2))
plt.colorbar(format='%.1f')
# plt.colorbar()
plt.xlabel('R')
plt.ylabel('Z')
plt.title('Concentration A')
plt.savefig('ConcentrationPlots/plot_ConcentrationA_.png')
#plt.savefig('ConcentrationPlots/plot_ConcentrationA.eps')
#plt.savefig('ConcentrationPlots/plot_ConcentrationA_' + str(frame) + '.pdf')
# Plot B
#------------------------------------------------------------
plt.figure(figsize=(12, 8))
plt.contourf(R, Z, Cb, NoColors, cmap=cmap)
def zonotope_2d_plot(vertices, design=None, y=None, f=None, out_label=None, opts=None):
"""A utility for plotting (m,2) zonotopes with designs and quadrature rules.
Parameters
----------
vertices : ndarray
M-by-2 matrix that contains the vertices that define the zonotope
design : ndarray, optional
N-by-2 matrix that contains a design-of-experiments on the zonotope. The
plot will contain the Delaunay triangulation of the points in `design`
and `vertices`. (default None)
y : ndarray, optional
K-by-2 matrix that contains points to be plotted inside the zonotope. If
`y` is given, then `f` must be given, too. (default None)
f: ndarray, optional
K-by-1 matrix that contains a color value for the associated points in
`y`. This is useful for plotting function values or quadrature rules
with the zonotope. If `f` is given, then `y` must be given, too.
(default None)
out_label : str, optional
a label for the quantity of interest (default None)
opts : dict, optional
a dictionary with some plot options (default None)
Notes
-----
This function makes use of the scipy.spatial routines for plotting the
zonotopes.
"""
if opts == None:
opts = plot_opts()
# set labels for plots
if out_label is None:
out_label = 'Output'
if vertices.shape[1] != 2:
raise Exception('Zonotope vertices should be 2d.')
if design is not None:
if design.shape[1] != 2:
raise Exception('Zonotope design should be 2d.')
if y is not None:
if y.shape[1] != 2:
raise Exception('Zonotope design should be 2d.')
if (y is not None and f is None) or (y is None and f is not None):
raise Exception('You need both y and f to plot.')
if y is not None and f is not None:
if y.shape[0] != f.shape[0]:
raise Exception('Lengths of y and f are not the same.')
# get the xlim and ylim
xmin, xmax = np.amin(vertices), np.amax(vertices)
# make the Polygon patch for the zonotope
ch = ConvexHull(vertices)
# make the Delaunay triangulation
if design is not None:
points = np.vstack((design, vertices))
dtri = Delaunay(points)
fig = plt.figure(figsize=(7,7))
ax = fig.add_subplot(111)
fig0 = convex_hull_plot_2d(ch, ax=ax)
for l in fig0.axes[0].get_children():
if type(l) is Line2D:
l.set_linewidth(3)
if design is not None:
fig1 = delaunay_plot_2d(dtri, ax=ax)
for l in fig1.axes[0].get_children():
if type(l) is Line2D:
l.set_color('0.75')
if y is not None:
plt.scatter(y[:,0], y[:,1], c=f, s=100.0, vmin=np.min(f), vmax=np.max(f))
plt.axes().set_aspect('equal')
plt.title(out_label)
plt.colorbar()
plt.axis([1.1*xmin,1.1*xmax,1.1*xmin,1.1*xmax])
plt.xlabel('Active variable 1')
plt.ylabel('Active variable 2')
show_plot(plt)
if opts['savefigs']:
figname = 'figs/zonotope_2d_' + out_label + opts['figtype']
plt.savefig(figname, dpi=300, bbox_inches='tight', pad_inches=0.0)
