def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError("Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
gta.load_roi('fit_baseline')
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
for profile in args.profiles:
pkey, pdict = SEDAnalysis._build_profile_dict(basedir, profile)
# test_case need to be a dict with spectrum and morphology
gta.add_source(pkey, pdict)
# refit the ROI
gta.fit()
# build the SED
gta.sed(pkey, outfile="sed_%s.fits" % pkey)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml('fit_baseline')
return gta
class ExtensionFit:
def __init__(self, configFile):
self.gta = GTAnalysis(configFile, logging={'verbosity': 3})
self.target = None
self.targetRadius = None
self.distance = None
self.catalog = fits.getdata('/users-data/mfalxa/code/gll_psch_v13.fit',
1)
def setSourceName(self, sourceObject, newName):
self.gta.delete_source(sourceObject['name'])
self.gta.add_source(newName, sourceObject)
''' INITIALIZE '''
def initialize(self, sizeROI, rInner, addToROI, TSMin, debug):
self.gta.setup()
if self.gta.config['selection']['emin'] >= 10000:
self.gta.set_parameter('galdiff', 'Scale', 30000)
if debug == True:
self.gta.make_plots('startAll')
self.gta.residmap(prefix='startAll', make_plots=True)
# Get model source names
sourceList = self.gta.get_sources(exclude=['isodiff', 'galdiff'])
# Delete sources unassociated with TS < 50
for i in range(len(sourceList)):
if sourceList[i]['catalog']['TS_value'] < TSMin and self.catalog[
'CLASS'][self.catalog['Source_Name'] == sourceList[i]
['name']][0] == '':
self.gta.delete_source(sourceList[i]['name'])
closests = self.gta.get_sources(distance=rInner,
exclude=['isodiff', 'galdiff'])
# Delete all unidentified sources
for i in range(len(closests)):
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0].isupper() == False:
self.gta.delete_source(closests[i]['name'])
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0] == 'SFR':
self.target = closests[i]
self.setSourceName(self.target, 'TESTSOURCE')
# If debug, save ROI and make plots
if debug == True:
self.gta.write_roi('startModel')
self.gta.residmap(prefix='start', make_plots=True)
self.gta.make_plots('start')
# Optmize spectral parameters for sources with npred > 1
self.gta.optimize(npred_threshold=1, skip=['isodiff'])
# Get model source names
sourceList = self.gta.get_sources(distance=sizeROI + addToROI,
square=True,
exclude=['isodiff', 'galdiff'])
# Iterate source localizing on source list
for i in range(len(sourceList)):
if sourceList[i].extended == False:
self.gta.localize(sourceList[i]['name'],
write_fits=False,
write_npy=False,
update=True)
# Free sources within ROI size + extra distance from center
self.gta.free_sources(distance=sizeROI + addToROI, square=True)
# Re-optimize ROI
self.gta.optimize(skip=['isodiff'])
# Save and make plots if debug
if debug == True:
self.gta.write_roi('modelInitialized')
self.gta.residmap(prefix='initialized', make_plots=True)
self.gta.make_plots('initialized')
# Lock sources
self.gta.free_sources(free=False)
''' OUTER REGION '''
def outerRegionAnalysis(self, sizeROI, rInner, sqrtTsThreshold,
minSeparation, debug):
self.gta.free_sources(distance=sizeROI,
pars='norm',
square=True,
free=True)
self.gta.free_sources(distance=rInner, free=False)
self.gta.free_source('galdiff', free=True)
self.gta.free_source('isodiff', free=False)
# Seek new sources until none are found
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'PointSource'
}
newSources = self.gta.find_sources(sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
model=sourceModel,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[rInner, sizeROI]
})
if len(newSources) > 0:
for i in range(len(newSources)):
if newSources['sources'][i]['ts'] > 100.:
self.gta.set_source_spectrum(
newSources['sources'][i]['name'],
spectrum_type='LogParabola')
self.gta.free_source(newSources['sources'][i]['name'])
self.gta.fit()
self.gta.free_source(newSources['sources'][i]['name'],
free=False)
# Optimize all ROI
self.gta.optimize(skip=['isodiff'])
# Save sources found
if debug == True:
self.gta.residmap(prefix='outer', make_plots=True)
self.gta.write_roi('outerAnalysisROI')
self.gta.make_plots('outer')
''' INNER REGION '''
def innerRegionAnalysis(self, sizeROI, rInner, maxIter, sqrtTsThreshold,
minSeparation, dmMin, TSm1Min, TSextMin, debug):
self.gta.free_sources(distance=sizeROI, square=True, free=False)
self.gta.free_sources(distance=rInner, free=True, exclude=['isodiff'])
# Keep closest source if identified with star forming region in catalog or look for new source closest to center within Rinner
if self.target != None:
print('Closest source identified with star forming region : ',
self.target['name'])
self.gta.set_source_morphology('TESTSOURCE',
**{'spatial_model': 'PointSource'})
else:
closeSources = self.gta.find_sources(sqrt_ts_threshold=2.,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[0., rInner]
})
dCenter = np.array([])
for i in range(len(closeSources['sources'])):
dCenter = np.append(
dCenter,
self.gta.roi.skydir.separation(
closeSources['sources'][i].skydir).value)
self.target = closeSources['sources'][np.argmin(dCenter)]
print('Target name : ', self.target['name'])
self.setSourceName(self.target, 'TESTSOURCE')
for i in [
x for x in range(len(closeSources['sources']))
if x != (np.argmin(dCenter))
]:
self.gta.delete_source(closeSources['sources'][i]['name'])
self.gta.optimize(skip=['isodiff'])
# Initialize n sources array
nSources = []
# Save ROI without extension fit
self.gta.write_roi('nSourcesFit')
if debug == True:
self.gta.make_plots('innerInit')
self.gta.residmap(prefix='innerInit', make_plots=True)
# Test for extension
extensionTest = self.gta.extension('TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
extLike = extensionTest['loglike_ext']
TSext = extensionTest['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
if debug == True:
self.gta.residmap(prefix='ext0', make_plots=True)
self.gta.make_plots('ext0')
self.gta.load_roi('nSourcesFit', reload_sources=True)
for i in range(1, maxIter + 1):
# Test for n point sources
nSourcesTest = self.gta.find_sources(
sources_per_iter=1,
sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir': self.gta.roi.skydir,
'search_minmax_radius': [0., rInner]
})
if len(nSourcesTest['sources']) > 0:
if nSourcesTest['sources'][0]['ts'] > 100.:
self.gta.set_source_spectrum(
nSourcesTest['sources'][0]['name'],
spectrum_type='LogParabola')
self.gta.free_source(nSourcesTest['sources'][0]['name'])
self.gta.fit()
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=False)
if debug == True:
self.gta.make_plots('nSources' + str(i))
nSources.append(nSourcesTest['sources'])
self.gta.localize(nSourcesTest['sources'][0]['name'],
write_npy=debug,
write_fits=debug,
update=True)
nAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=True)
self.gta.residmap(prefix='nSources' + str(i), make_plots=True)
self.gta.write_roi('n1SourcesFit')
# Estimate Akaike Information Criterion difference between both models
dm = extAIC - nAIC
print('AIC difference between both models = ', dm)
# Estimate TS_m+1
extensionTestPlus = self.gta.extension(
'TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
TSm1 = 2 * (extensionTestPlus['loglike_ext'] - extLike)
print('TSm+1 = ', TSm1)
if debug == True:
self.gta.residmap(prefix='ext' + str(i), make_plots=True)
self.gta.make_plots('ext' + str(i))
if dm < dmMin and TSm1 < TSm1Min:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
# Set extension test to current state and save current extension fit ROI and load previous nSources fit ROI
extensionTest = extensionTestPlus
extLike = extensionTestPlus['loglike_ext']
TSext = extensionTestPlus['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
self.gta.load_roi('n1SourcesFit', reload_sources=True)
self.gta.write_roi('nSourcesFit')
else:
if TSext > TSextMin:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
self.gta.load_roi('nSourcesFit', reload_sources=True)
break
self.gta.fit()
# Get source radius depending on spatial model
endSources = self.gta.get_sources()
for i in range(len(endSources)):
if endSources[i]['name'] == 'TESTSOURCE':
self.target = endSources[i]
self.distance = self.gta.roi.skydir.separation(
endSources[i].skydir).value
if endSources[i].extended == True:
self.targetRadius = endSources[i]['SpatialWidth']
else:
self.targetRadius = endSources[i]['pos_r95']
''' CHECK OVERLAP '''
def overlapDisk(self, rInner, radiusCatalog):
print('Target radius : ', self.targetRadius)
# Check radius sizes
if radiusCatalog < self.targetRadius:
r = float(radiusCatalog)
R = float(self.targetRadius)
else:
r = float(self.targetRadius)
R = float(radiusCatalog)
# Estimating overlapping area
d = self.distance
print('Distance from center : ', d)
if d < (r + R):
if R < (r + d):
area = r**2 * np.arccos(
(d**2 + r**2 - R**2) / (2 * d * r)) + R**2 * np.arccos(
(d**2 + R**2 - r**2) / (2 * d * R)) - 0.5 * np.sqrt(
(-d + r + R) * (d + r - R) * (d - r + R) *
(d + r + R))
overlap = round((area / (np.pi * r**2)) * 100, 2)
else:
area = np.pi * r**2
overlap = 100.0
else:
area = 0.
overlap = 0.
print('Overlapping surface : ', area)
print('Overlap : ', overlap)
if overlap > 68. and self.distance < rInner:
associated = True
else:
associated = False
return associated
''' CHECK UPPER LIMIT '''
def upperLimit(self, name, radius):
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'RadialDisk',
'SpatialWidth': radius,
'glon': self.gta.config['selection']['glon'],
'glat': self.gta.config['selection']['glat']
}
self.gta.add_source(name, sourceModel, free=True)
self.gta.fit()
self.gta.residmap(prefix='upperLimit', make_plots=True)
print('Upper limit : ', self.gta.get_sources()[0]['flux_ul95'])
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, pdict = AnalyzeSED._build_profile_dict(
basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_dict = add_source_get_correlated(gta,
pkey,
pdict,
correl_thresh=0.25)
# Write the list of correlated sources
correl_yaml = os.path.join(basedir, "correl_%s.yaml" % pkey)
write_yaml(correl_dict, correl_yaml)
gta.free_sources(False)
for src_name in correl_dict.keys():
gta.free_source(src_name, pars='norm')
# build the SED
gta.sed(pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
if is_null(args.skydirs):
skydir_dict = None
else:
skydir_dict = load_yaml(args.skydirs)
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
#gta.setup(overwrite=False)
gta.load_roi(args.roi_baseline)
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
for profile in args.profiles:
if skydir_dict is None:
skydir_keys = [None]
else:
skydir_keys = sorted(skydir_dict.keys())
for skydir_key in skydir_keys:
if skydir_key is None:
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
else:
skydir_val = skydir_dict[skydir_key]
pkey, psrc_name, pdict = build_profile_dict(basedir, profile)
pdict['ra'] = skydir_val['ra']
pdict['dec'] = skydir_val['dec']
pkey += "_%06i" % skydir_key
outfile = "sed_%s.fits" % pkey
# Add the source and get the list of correlated soruces
correl_dict, test_src_name = add_source_get_correlated(gta, psrc_name,
pdict, correl_thresh=0.25,
non_null_src=args.non_null_src)
# Write the list of correlated sources
correl_yaml = os.path.join(basedir, "correl_%s.yaml" % pkey)
write_yaml(correl_dict, correl_yaml)
gta.free_sources(False)
for src_name in correl_dict.keys():
gta.free_source(src_name, pars='norm')
# build the SED
if args.non_null_src:
gta.update_source(test_src_name, reoptimize=True)
gta.write_roi("base_%s"% pkey, make_plots=False)
gta.sed(test_src_name, prefix=pkey, outfile=outfile, make_plots=args.make_plots)
# remove the source
gta.delete_source(test_src_name)
# put the ROI back to how it was
gta.load_xml(args.roi_baseline)
return gta
def main(cmd_line):
#takes integer arguement specifying the simulation number
sim = cmd_line[1]
indir = "/zfs/astrohe/ckarwin/Machine_Learning_GC/Sim_2/Dame_Maps/"
outdir = indir + "Simulation_Output/sim_%s" % sim
if (os.path.isdir(outdir) == True):
shutil.rmtree(outdir)
os.system('mkdir %s' % outdir)
os.chdir(outdir)
#A single simulation should first be ran, which will generate all the needed data products that can be reused for subsequent simulations.
#The data products that are copied below are for subsequent simulations after the first run.
shutil.copy2('%s/srcmap_00.fits' % indir, 'srcmap_00.fits')
shutil.copy2('%s/bexpmap_00.fits' % indir, 'bexpmap_00.fits')
shutil.copy2('%s/ccube_00.fits' % indir, 'ccube_00.fits')
shutil.copy2('%s/config.yaml' % indir, 'config.yaml')
shutil.copy2('%s/ft1_00.fits' % indir, 'ft1_00.fits')
shutil.copy2('%s/LAT_Final_Excess_Template.fits' % indir,
'LAT_Final_Excess_Template.fits')
#setup analysis:
gta = GTAnalysis('config.yaml', logging={'verbosity': 3})
gta.setup()
#gta.load_roi("after_setup")
#set components to zero for simulations:
gta.set_norm("MapSource", 0.0) #excess template
gta.set_norm("galdiff04", 0.0) #CO12_0-5
gta.set_norm("galdiff05", 0.0) #CO12_6-9
gta.set_norm("galdiff06", 0.0) #CO12_10-12
gta.set_norm("galdiff07", 0.0) #CO12_13-16
#run simulations:
gta.write_roi('before_sim')
gta.simulate_roi(randomize=True)
#delete sources that were simulated:
gta.delete_source("galdiff00", delete_source_map=False)
gta.delete_source("galdiff01", delete_source_map=False)
gta.delete_source("galdiff02", delete_source_map=False)
gta.delete_source("galdiff03", delete_source_map=False)
#set random normalizations of sources for performing fit:
#n4 = np.random.normal(1.0,0.2)
#n5 = np.random.normal(1.0,0.2)
#n6 = np.random.normal(1.0,0.2)
#nms = np.random.normal(1e-4,0.5e-4)
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
#perform fit for null hypothesis:
gta.free_sources(free=True)
gta.free_source("galdiff07", free=False)
gta.free_source("MapSource", free=False)
Fit = gta.fit()
null = Fit["loglike"]
gta.write_roi('after_null_fit')
gta.write_model_map("null_model")
#set normalizations of sources for performing alternative fit:
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
gta.set_norm("MapSource", 1e-4)
gta.free_sources(free=True)
#gta.free_source("galdiff07",free=False)
Fit2 = gta.fit()
alternative = Fit2["loglike"]
gta.write_roi('after_alternative_fit')
gta.write_model_map("alternative_model")
#calculate source spectrum:
ltcube = '/zfs/astrohe/ckarwin/Stacking_Analysis/UFOs/NGC_4151_Analysis/MakeLTCube/zmax_105/UFOs_binned_ltcube.fits'
obs = BinnedObs(srcMaps='srcmap_00.fits',
expCube=ltcube,
binnedExpMap='bexpmap_00.fits',
irfs='P8R3_SOURCE_V2')
like = BinnedAnalysis(obs,
'after_alternative_fit_00.xml',
optimizer='MINUIT')
Elist, Flist = CalcFlux(like, 'MapSource')
data = {"energ[MeV]": Elist, "flux[MeV/cm^2/s]": Flist}
df = pd.DataFrame(data=data)
df.to_csv("excess_flux.dat", sep="\t", index=False)
#calculte TS:
TS = -2 * (null - alternative)
#write results:
savefile = "TS_sim_%s.txt" % sim
f = open(savefile, "w")
f.write(str(TS))
f.close()
#rm ft file to reduce storage:
os.system('rm ft1_00.fits')
return