from djitellopy import Tello
import tkinter, time, winsound
def warning():
for n in range(4): # 4 short beeps
winsound.Beep(1500, 500)
time.sleep(0.5)
winsound.Beep(1500, 1000) # 1 long beep
tello = Tello()
tello.connect()
# Activate the mission pads
tello.enable_mission_pads()
tello.set_mission_pad_detection_direction(0) # use downward camera
# Take off
warning()
tello.takeoff()
tello.send_rc_control(0, 30, 0, 0) # Move forward
pad = tello.get_mission_pad_id() # Look for a mission pad
while pad != 1: # While we don't see pad 1
if pad == 4: # If we see pad 4
winsound.Beep(2500, 500)
pad = tello.get_mission_pad_id() # Take another look
# Land
tello.disable_mission_pads()
tello.land()
tello.end()
class TelloCV(object):
"""
TelloTracker builds keyboard controls on top of TelloPy as well
as generating images from the video stream and enabling opencv support
"""
def __init__(self):
self.prev_flight_data = None
self.record = False
self.tracking = False
self.keydown = False
self.date_fmt = '%Y-%m-%d_%H%M%S'
self.speed = 50
self.go_speed = 80
self.drone = Tello()
self.init_drone()
self.init_controls()
self.battery = self.drone.get_battery()
self.frame_read = self.drone.get_frame_read()
self.forward_time = 0
self.forward_flag = True
self.takeoff_time = 0
self.command_time = 0
self.command_flag = False
# trackingimport libh264decoder a color
# green_lower = (30, 50, 50)
# green_upper = (80, 255, 255)
# red_lower = (0, 50, 50)
# red_upper = (20, 255, 255)
blue_lower = np.array([0, 0, 0])
upper_blue = np.array([255, 255, 180])
bh_lower = (180, 30, 100)
bh_upper = (275, 50, 100)
self.track_cmd = ""
self.tracker = Tracker(960,
720,
blue_lower, upper_blue)
self.speed_list = [5, 10, 15, 20, 25]
self.frame_center = 480, 360
self.error = 60
def init_drone(self):
"""Connect, uneable streaming and subscribe to events"""
# self.drone.log.set_level(2)
self.drone.connect()
self.drone.streamon()
def on_press(self, keyname):
"""handler for keyboard listener"""
if self.keydown:
return
try:
self.keydown = True
keyname = str(keyname).strip('\'')
print('+' + keyname)
if keyname == 'Key.esc':
self.drone.quit()
exit(0)
if keyname in self.controls:
key_handler = self.controls[keyname]
if isinstance(key_handler, str):
getattr(self.drone, key_handler)(self.speed)
else:
key_handler(self.speed)
except AttributeError:
print('special key {0} pressed'.format(keyname))
def on_release(self, keyname):
"""Reset on key up from keyboard listener"""
self.keydown = False
keyname = str(keyname).strip('\'')
print('-' + keyname)
if keyname in self.controls:
key_handler = self.controls[keyname]
if isinstance(key_handler, str):
getattr(self.drone, key_handler)(0)
else:
key_handler(0)
def init_controls(self):
"""Define keys and add listener"""
self.controls = {
'w': lambda speed: self.drone.move_forward(speed),
's': lambda speed: self.drone.move_back(speed),
'a': lambda speed: self.drone.move_left(speed),
'd': lambda speed: self.drone.move_right(speed),
'Key.space': 'up',
'Key.shift': 'down',
'Key.shift_r': 'down',
'q': 'counter_clockwise',
'e': 'clockwise',
'i': lambda speed: self.drone.flip_forward(),
'k': lambda speed: self.drone.flip_back(),
'j': lambda speed: self.drone.flip_left(),
'l': lambda speed: self.drone.flip_right(),
# arrow keys for fast turns and altitude adjustments
'Key.left': lambda speed: self.drone.rotate_counter_clockwise(speed),
'Key.right': lambda speed: self.drone.rotate_clockwise(speed),
'Key.up': lambda speed: self.drone.move_up(speed),
'Key.down': lambda speed: self.drone.move_down(speed),
'Key.tab': lambda speed: self.drone.takeoff(),
# 'Key.tab': self.drone.takeoff(60),
'Key.backspace': lambda speed: self.drone.land(),
'p': lambda speed: self.palm_land(speed),
't': lambda speed: self.toggle_tracking(speed),
'r': lambda speed: self.toggle_recording(speed),
'z': lambda speed: self.toggle_zoom(speed),
'Key.enter': lambda speed: self.take_picture(speed)
}
self.key_listener = keyboard.Listener(on_press=self.on_press,
on_release=self.on_release)
self.key_listener.start()
# self.key_listener.join()
def process_frame(self):
"""convert frame to cv2 image and show"""
# print("TRACKING START")
frame = self.frame_read.frame
# self.drone.move_up(self.speed)
# image = self.write_hud(image)
# if self.record:
# self.record_vid(frame)
return frame
def move_up(self):
self.drone.move_up(self.speed)
def take_off(self):
self.drone.takeoff()
def go(self):
self.drone.move_forward(self.go_speed)
def move_left(self):
self.drone.move_left(270) # speed 테스트해서 조절하기
def go_window9(self):
self.drone.move_forward()
def rotate_right(self):
self.drone.rotate_clockwise()
def rotate_left(self):
self.drone.rotate_counter_clockwise()
def landing(self):
self.drone.land()
def write_hud(self, frame):
"""Draw drone info, tracking and record on frame"""
stats = self.prev_flight_data.split('|')
stats.append("Tracking:" + str(self.tracking))
if self.drone.zoom:
stats.append("VID")
else:
stats.append("PIC")
if self.record:
diff = int(time.time() - self.start_time)
mins, secs = divmod(diff, 60)
stats.append("REC {:02d}:{:02d}".format(mins, secs))
for idx, stat in enumerate(stats):
text = stat.lstrip()
cv2.putText(frame, text, (0, 30 + (idx * 30)),
cv2.FONT_HERSHEY_SIMPLEX,
1.0, (255, 0, 0), lineType=30)
return frame
def toggle_recording(self, speed):
"""Handle recording keypress, creates output stream and file"""
if speed == 0:
return
self.record = not self.record
if self.record:
datename = [os.getenv('HOME'), datetime.datetime.now().strftime(self.date_fmt)]
self.out_name = '{}/Pictures/tello-{}.mp4'.format(*datename)
print("Outputting video to:", self.out_name)
self.out_file = av.open(self.out_name, 'w')
self.start_time = time.time()
self.out_stream = self.out_file.add_stream(
'mpeg4', self.vid_stream.rate)
self.out_stream.pix_fmt = 'yuv420p'
self.out_stream.width = self.vid_stream.width
self.out_stream.height = self.vid_stream.height
if not self.record:
print("Video saved to ", self.out_name)
self.out_file.close()
self.out_stream = None
def record_vid(self, frame):
"""
convert frames to packets and write to file
"""
new_frame = av.VideoFrame(
width=frame.width, height=frame.height, format=frame.format.name)
for i in range(len(frame.planes)):
new_frame.planes[i].update(frame.planes[i])
pkt = None
try:
pkt = self.out_stream.encode(new_frame)
except IOError as err:
print("encoding failed: {0}".format(err))
if pkt is not None:
try:
self.out_file.mux(pkt)
except IOError:
print('mux failed: ' + str(pkt))
def take_picture(self, speed):
"""Tell drone to take picture, image sent to file handler"""
if speed == 0:
return
self.drone.take_picture()
def palm_land(self, speed):
"""Tell drone to land"""
if speed == 0:
return
self.drone.palm_land()
def toggle_tracking(self, speed):
""" Handle tracking keypress"""
if speed == 0: # handle key up event
return
self.tracking = not self.tracking
print("tracking:", self.tracking)
return
def toggle_zoom(self, speed):
"""
In "video" mode the self.drone sends 1280x720 frames.
In "photo" mode it sends 2592x1936 (952x720) frames.
The video will always be centered in the window.
In photo mode, if we keep the window at 1280x720 that gives us ~160px on
each side for status information, which is ample.
Video mode is harder because then we need to abandon the 16:9 display size
if we want to put the HUD next to the video.
"""
if speed == 0:
return
self.drone.set_video_mode(not self.drone.zoom)
def flight_data_handler(self, event, sender, data):
"""Listener to flight data from the drone."""
text = str(data)
if self.prev_flight_data != text:
self.prev_flight_data = text
def handle_flight_received(self, event, sender, data):
"""Create a file in ~/Pictures/ to receive image from the drone"""
path = '%s/Pictures/tello-%s.jpeg' % (
os.getenv('HOME'),
datetime.datetime.now().strftime(self.date_fmt))
with open(path, 'wb') as out_file:
out_file.write(data)
print('Saved photo to %s' % path)
def enable_mission_pads(self):
self.drone.enable_mission_pads()
def disable_mission_pads(self):
self.drone.disable_mission_pads()
def go_xyz_speed_mid(self, x, y, z, speed, mid):
self.drone.go_xyz_speed_mid(x, y, z, speed, mid)
# if function return True, set drone center to object's center
def track_mid(self, x, y):
midx, midy = 480, 360
distance_x = abs(midx - x)
distance_y = abs(midy - y)
print(x, y, distance_x, distance_y)
move_done = True
if y > midy + self.error + 15:
self.drone.move_down(20)
move_done = False
elif y < midy - self.error + 5:
self.drone.move_up(20)
move_done = False
elif x < midx - self.error:
self.drone.move_left(20)
move_done = False
elif x > midx + self.error:
self.drone.move_right(20)
move_done = False
return move_done
def track_x(self, x, left_count, right_count):
midx = 480
move_done = True
if x < midx - 100:
self.drone.move_left(20)
left_count += 1
move_done = False
elif x > midx + 100:
self.drone.move_right(20)
right_count += 1
move_done = False
return move_done
def go_slow(self):
self.drone.move_forward(30)
def go_fast(self):
self.drone.move_forward(200)
if curr_height > (dh + 5):
me.move_down(20)
curr_height = me.get_height()
if curr_height < (dh - 5):
me.move_up(20)
curr_height = me.get_height()
print("Height", curr_height)
'''
print("Beginning Move:", time.process_time())
# me.__send_stick_command()
me.move_forward(100)
print("Done Move:", time.process_time())
'''
# mission pad detection
# me.mon()
me.enable_mission_pads()
me.set_mission_pad_detection_direction(0)
'''
if me.get_mission_pad_id() > 0:
me.flip_back()
break
'''
while me.get_mission_pad_id() != 4:
me.move_forward(100)
d += 100
if d == 500:
me.move_back(d)
me.end()
print("Haven't found mission pad\n")